JVC KD-AVX44 Instructions - Page 609
Through, 80Hz, 120Hz, Low Power, High Power, Installation/Connection Manual. The rear view through
UPC - 046838031953
View all JVC KD-AVX44 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 609 highlights
ENGLISH Sound Menu items Fader/Balance Adjusts fader Adjust balance Volume Adjust Subwoofer Level*6 High Pass Filter Crossover Amplifier Gain Rear Speaker*7 Selectable settings, [reference page] Adjust fader-speaker output balance between the front and rear speakers. • Upmost-front only • Downmost-rear only When using a two-speaker system, set the fader to the center (00). Adjust balance-speaker output balance between the left and right speakers. • Leftmost-left only • Rightmost-right only Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. -12 to +12; Initial 00 • For digital sources: You can make the adjustments separately depending on the audio format-Dolby Digital/DTS and the others. Adjust the subwoofer output level. -06 to +08; Initial 00 Through: Select when the subwoofer is not connected. On: Select when the subwoofer is connected. Adjust the crossover frequency between the front/rear speakers and the subwoofer. 80Hz, 120Hz, 150Hz You can change the maximum volume level of this unit. Off: Deactivates the built-in amplifier. Low Power: Select this if the maximum power of the speakers is less than 50 W. High Power You can activate/deactivate the rear speakers. Off, On *1 Not selectable when "AV Input" is selected as the source. *2 The REVERSE GEAR SIGNAL lead connection is required ☞ "Installation/Connection Manual." The rear view through the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you shift the gear to the reverse (R) position. *3 Not selectable when the component connected to the CD changer jack is selected as the source. *4 The name of the component detected through the CD changer jack is shown. *5 The TEL MUTING lead connection is required. ☞ "Installation/Connection Manual." *6 This setting takes effect only when surround is deactivated. (☞ also pages 22 and 23) *7 This setting takes effect only when Dual Zone is activated. (☞ also page 26) 53 SETTINGS