JVC KD-AVX44 Instructions - Page 683

Disc Setup *12 ENGLISH Menu items D. (Dynamic) Range Compres. (Compression) Speaker Size Select the speaker Adjust the speaker size Speaker Level Select the speaker Adjust the speaker level Selectable settings, [reference page] You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. Auto: Select to apply the effect to multi-channel encoded software. On: Select to always use this function. You can adjust the speaker size setting. • Front SPK: Small, Large • Center SPK: None, Small, Large • Rear SPK: None, Small, Large • Subwoofer: On, Off • Speaker size: for 13 cm diameter or more; for 13 cm or less. • Front speakers and rear speakers cannot be adjusted separately the left and right. Regardless of the setting above... • No sound comes out of the subwoofer while playing Dolby Pro Logic II Movie or Music if the front speaker is set to . • No sound comes out of the center speaker when surround is deactivated. You can adjust the output level of the activated speakers (☞ above), monitoring the test tone. Front Lch/Center Ch/Front Rch/Rear Rch/Subwoofer*2/Rear Lch: Adjust the output level of each speaker in the range of -10dB to +10dB; Initial 0dB. • Hold 6 to turn on and off the test tone. Speaker Distance Select the speaker Adjust the speaker distance You can adjust the speaker output timing. Front Lch/Center Ch/Front Rch/Rear Rch/Rear Lch: Adjust the speaker distance from the listening position in the range of 15 cm/6 inches to 600 cm/240 inches in 15 cm/6 inch step; Initial 120 cm/48 inch (for center speaker), 150 cm/60 inch (for other speakers). • Hold DISP to change the measuring unit-cm and inch. *1 Selectable only for "Disc" and "USB." (Playback stops when you select one of the items.) *2 This subwoofer level setting takes effect only when surround is activated. (☞ also pages 26 and 27) 51 SETTINGS