JVC KD-AVX44 Instructions - Page 71
Symptoms, Remedies/Causes, Bluetooth, iPod playback, Audio/Video Remote Control Profile.
UPC - 046838031953
View all JVC KD-AVX44 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
ENGLISH Bluetooth Symptoms Remedies/Causes • Bluetooth device does not detect the unit. • Search from the Bluetooth device again. • Reset the unit. When "Open..." appears on the monitor, search from the Bluetooth device again. • The unit does not make pairing with the • Enter the same PIN code for both the unit and target Bluetooth device. device. If the PIN code of the device is not indicated on its manuals, try "0000" or "1234." • Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth cellular phone. • Move the car to place where you can get a better signal reception. • The sound is interrupted or skipped while • Reduce the distance between the unit and the Bluetooth using a Bluetooth audio player. audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (When the sound is not yet restored,) connect the device again. • The connected audio player cannot be Check whether the connected audio player supports AVRCP controlled. (Audio/Video Remote Control Profile). • The unit does not response when you tried to You may have tried to copy the same entries (as stored) to copy the phone book to the unit. the unit. Touch BAND to exit. • "No Audio Device" appears on the monitor. Connect this unit and the Bluetooth audio player correctly. • "No Voice Device" appears on the monitor. The connected cellular phone does not have the voice recognition system. • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Charge the battery. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod. • "Disconnect" appears on the monitor. Check the connecting cable and its connection. • Playback stops. The headphones are disconnected during playback. Restart playback. • "No Files" appears on the monitor. No tracks are stored. Import tracks to the iPod. • "Reset 01" - "Reset 07" appears on the Disconnect the adapter from both this unit and iPod. Then, monitor. connect them again. • "Reset 08" appears on the monitor. Check the connection between the adapter and this unit. • The iPod's controls do not work after Reset the iPod. disconnecting from this unit. • "Restricted Device" appears on the monitor. Check whether the connected iPod is compatible with this unit. (☞ page 65) • No operations are available while playing Operate the unit after the artwork is loaded. (☞ page 65) back a track containing artwork. iPod playback 71 REFERENCES