JVC KDS23 Instructions - Page 3
Preparations, Troubleshooting, Specifications - car stereo manual
UPC - 046838026720
View all JVC KDS23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
INSTRUCTIONS Indication Item ( : Initial) Setting DEMO • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds. : Cancels. CLOCK H (Hour) CLOCK M (Minute) DIMMER *1 SCROLL *1 1 - 12 00 - 59 • ON • OFF • ONCE • AUTO • OFF WOOFER *1, *2 • LOW • MID • HIGH : [Initial: 1 (1:00)] : [Initial: 00 (1:00)] : Dims the display illumination. : Cancels. : Scrolls the disc information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting. : Frequencies lower than 90 Hz are sent to the subwoofer. : Frequencies lower than 135 Hz are sent to the subwoofer. : Frequencies lower than 180 Hz are sent to the subwoofer. L/O MODE TAG DISP *1 AMP GAIN *3 • REAR • WOOFER • TAG ON • TAG OFF • LOW PWR • HIGH PWR : Select if the REAR LINE OUT terminals are used for connecting the speakers (through an external amplifier). : Select if the REAR LINE OUT terminals are used for connecting a subwoofer. : Shows the tag while playing MP3/WMA tracks. : Cancels. : VOL 00 - VOL 30 (Select if the maximum power of each speaker is less than 45 W to prevent the speaker from being damaged.) : VOL 00 - VOL 50 AREA • AREA US : When using in North/Central/South America. AM/FM intervals are set to 10 kHz/200 kHz. • AREA SA : When using in South American countries where FM interval is 100 kHz. AM interval is set to 10 kHz. • AREA EU : When using in any other areas. AM/FM intervals are set to 9 kHz/50 kHz (100 kHz during auto search). *1 For KD-S23. *2 Displayed only when "L/O MODE" is set to "WOOFER." *3 The volume level automatically changes to "VOL 30" if you change to "LOW PWR" while the volume level is set higher than "VOL 30." TROUBLESHOOTING FM/AM General Disc playback Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The buttons on the unit do not work as you If you press M MODE, some buttons work differently from it intended. original function. Wait for 5 seconds or press M MODE again. • This unit does not work at all. Reset the unit. • SSM automatic presetting does not work. Store stations manually. • Static noise while listening to the radio. Connect the antenna firmly. • Disc ejects. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. • Insert a finalized CD-R/CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc can be neither played back nor ejected. • Unlock the disc. • Eject the disc forcibly. • Disc sound is sometimes interrupted. • Stop playback while driving on rough roads. • Change the disc. • Check the cords and connections. • "NO DISC" appears on the display. Insert a playable disc into the loading slot. • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code or to the file names. • Noise is generated. Skip to another track or change the disc. (Do not add the extension code or to non-MP3 or WMA tracks.) • A longer readout time is required ("CHECK" Do not use too many hierarchies and folders. keeps flashing on the display). • Tracks do not play back in the order you Playback order is determined when the files are recorded. have intended them to play. • Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how the tracks are recorded on the disc. • "NO FILES" appears on the display. Insert a disc that contains MP3/WMA tracks. • Correct characters are not displayed (e.g. This unit can only display alphabets (upper case), numbers, and a album name). limited number of symbols. MP3/WMA playback (for KD-S23 only) SPECIFICATIONS Audio amplifier section Power Output: 17 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Line-Out Level/Impedance: KD-S23: 2.5 V/20 kΩ load (full scale) KD-S13: 2.0 V/20 kΩ load (full scale) Output Impedance: 1 kΩ Subwoofer-Out Level/Impedance: 2.0 V/20 kΩ load (full scale) Having TROUBLE with operation? Please reset your unit Still having trouble?? Call 1-800-252-5722 (USA ONLY) http://www.jvc.com Tuner section Frequency Range: FM: 87.5 MHz to 107.9 MHz (with channel interval set to 100 kHz or 200 kHz) 87.5 MHz to 108.0 MHz (with channel interval set to 50 kHz) AM: 530 kHz to 1 710 kHz (with channel interval set to 10 kHz) 531 kHz to 1 602 kHz (with channel interval set to 9 kHz) [FM Tuner] Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω) 50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 35 dB [AM Tuner] Sensitivity: 20 μV Selectivity: 35 dB CD player section Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit For KD-S23: MP3 Decoding Format: MPEG1/2 Audio Layer 3 Max. Bit Rate: 320 kbps WMA (Windows Media® Audio) Decoding Format: Max. Bit Rate: 192 kbps • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. General Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature: 0°C to +40°C (32°F to 104°F) Dimensions (W × H × D): Installation Size (approx.): 182 mm × 52 mm × 150 mm (7-3/16" × 2-1/16" × 5-15/16") Panel Size (approx.): 188 mm × 58 mm × 11 mm (7-7/16" × 2-5/16" × 7/16") Mass (approx.): 1.2 kg (2.6 lbs) (excluding accessories) Design and specifications are subject to change without notice. If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop. PREPARATIONS You need the installation kits which corresponds to your car. • Mark all the check boxes ( ) to make sure you have follow the instructions and the listed parts. Check the battery system in your car Prepare this before installation 12 V DC, NEGATIVE ground TROUBLESHOOTING • The fuse blows. * Are the red and black leads connected correctly? • Power cannot be turned on. * Is the yellow lead connected? • No sound from the speakers. * Is the speaker output lead short-circuited? • Sound is distorted. * Is the speaker output lead grounded? * Are the "-" terminals of L and R speakers grounded in common? • Noise interfere with sounds. * Is the rear ground terminal connected to the car's chassis using shorter and thicker cords? • This unit becomes hot. * Is the speaker output lead grounded? * Are the "-" terminals of L and R speakers grounded in common? • This unit does not work at all. * Have you reset your unit? Parts list for installation and connection F Lock nut (M5) A Control panel B Sleeve G Mounting bolt- M5 x 20 mm (M5 x 13/16") C Trim plate H Rubber cushion 3 - EN I Handles D Power cord For KD-S23 J Remote controller E Washer (ø5) K Battery