JVC KW ADV790 Instructions - Page 27

ENGLISH Bluetooth® operations - Cellular phone/audio player For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear. • Refer also to the instructions supplied with the Bluetooth Adapter and the Bluetooth device. • Refer to the list (included in the box) to see the countries where you may use the Bluetooth® function. To use a Bluetooth device through the unit ("Bluetooth PHONE" and "Bluetooth AUDIO") for the first time, you need to establish Bluetooth wireless connection between the unit and the device. • Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be registered in total. • Only one device can be connected at a time for each source ("Bluetooth PHONE" and "Bluetooth AUDIO"). Connecting a new Bluetooth device Registration (Pairing) methods Use either of the following items in menu to register and establish the connection with a device. • Select "Bluetooth PHONE" or "Bluetooth AUDIO" as the source to operate menu. Open Make the unit ready to establish a new Bluetooth connection. The connection is established by operating the Bluetooth device. Search Make the unit ready to establish a new Bluetooth connection. The connection is established by operating this unit. 1 • Make sure "New Device" is selected. If not, press [5] or [∞] to select it. • You can also use AV MENU on the monitor panel. 2 3 Go to other menu items 4 Enter a PIN (Personal Identification Number)* code to the unit. • You can enter any number you like (1-digit to 16-digit number). * Some devices have their own PIN code. Enter the specified PIN code to the unit. To register using Preparation: Operate the Bluetooth device to turn on its Bluetooth function. 27 Continued on the next page EXTERNAL DEVICES