JVC LT-47X898 Instructions
JVC LT-47X898 - 47" LCD TV Manual
 |
UPC - 046838030581
View all JVC LT-47X898 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC LT-47X898 manual content summary:
- JVC LT-47X898 | Instructions - Page 1
LCD Flat Television Users Guide For Models: LT-37X898 LT-42X898 LT-47X898 Illustration of LT-42X898 and RM-C1400 Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the - JVC LT-47X898 | Instructions - Page 2
and maintenance (servicing) instructions in the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. Changes or modifications not approved by JVC could void the warranty. * When you don't use this TV - JVC LT-47X898 | Instructions - Page 3
org IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any - JVC LT-47X898 | Instructions - Page 4
standby even when all the LED lamps are not lit. To shut down the TV, unplug the TV from the wall outlet. FCC Notice: Caution: Changes or modifications not and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is - JVC LT-47X898 | Instructions - Page 5
services (do not have a separate cable box) and plan to use their JVC TV remote control to select channels. Once you run the Auto Tuner Setup (which detects and programs all the channels your TV -market report bars • Shopping channel logos and pricing displays • Video game patterns or scoreboards • - JVC LT-47X898 | Instructions - Page 6
light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first TV through the ventilation slots. • DO NOT use strong or abrasive cleaners on the TV. • DO NOT spray liquids or cleaners directly on the TV's surface. • DO NOT rub or scrub the TV - JVC LT-47X898 | Instructions - Page 7
stand, attach the bottom cover and the screw (supplied) into the hole. 1) Place the TV face down on a soft cloth on a table. 2) Remove the four screws from the back of the TV. 3) Pull out the stand from the TV. 4) Cover the hole with a bottom cover and tighten the screw. Note: • To re-install - JVC LT-47X898 | Instructions - Page 8
Set Lock Code 46 Auto Demo 47 Digital Setup 47 V5 Input 49 Picture Adjust 50 59 Return+/TV 60 Light 60 Menu 60 OK 60 Back 60 Favorite 61 Aspect 62 Guide 63 Sound Weak Signal 75 No Program 75 Invalid Signal 75 Troubleshooting 76 Specifications 78 Warranty 79 Authorized Service - JVC LT-47X898 | Instructions - Page 9
Quick Setup Unpacking your TV Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: Television x 1 + AA Alkaline - + - JVC LT-47X898 | Instructions - Page 10
another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how AOUUDTIO OUT R - AUDIO - L Notes: • The terminal labeled "SERVICE ONLY", is exclusively used to update the software version. • For governing the usage of the RS-232C - JVC LT-47X898 | Instructions - Page 11
RM-C1400 Notes: • For information on remote control buttons, see pages 58 - 68. • SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an ATSC antenna or Digital Cable, you can use these buttons. • This remote control is capable of operating many external device brands - JVC LT-47X898 | Instructions - Page 12
detailed information on any of these steps, please consult other sections of this manual. Step 1 - The Remote Control Before you can operate your remote control, you are turning on the TV, the interactive plug in menu appears. • At first, to watch your TV, select the TV mode by pressing the MODE - JVC LT-47X898 | Instructions - Page 13
Cables Audio Cables Used to connect an external antenna or cable TV system to your TV. S-Video Cable Used to connect audio/video devices like VCRs, a satellite television system, refer to the satellite TV manual. No VCR Connection Cable or Antenna Output Coaxial Cable TV Rear Panel 13 - JVC LT-47X898 | Instructions - Page 14
cables. Some models may vary colors. Please consult the user's manual for your DVD player for more information. • Be careful not Y PR S-VIDEO PB VIDEO R - AUDIO - L R AUDIO INPUT L R - AUDIO - L TV Rear Panel AUDIO OUT R L DVD Player Y PB PR OUT Green Blue Red Cable or Antenna Output - JVC LT-47X898 | Instructions - Page 15
SUB) VIDEO R - AUDIO - L Y PR PB VIDEO R - AUDIO - L INPUT 4 INPUT 3 Y PR PB S-VIDEO VIDEO R - AUDIO - L R AUDIO INPUT L UDIOFOORUHTDMI 1 R - AUDIO - L UDIO AOUUDTIO OUT TV Rear Panel Quick Setup Cable or Antenna Output AUDIO OUT R L DVD Player Y PB PR OUT Green Blue Red IN Two-Way - JVC LT-47X898 | Instructions - Page 16
to a Camcorder You can connect a camcorder to your television by using the input jacks located on the back of the TV. I CAMCORDER TV Rear Panel INPUT 4 VIDEO R - AUDIO - L Y PR PB VIDEO R - AUDIO - L Y INPUT 3 PR PB S-VIDEO VIDEO R - AUDIO - L 1) Connect a yellow composite cable from - JVC LT-47X898 | Instructions - Page 17
AUDIO INPUT on the amplifier. 2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier. Notes: • Refer to your amplifier's manual for more information. • You can use AUDIO OUTPUT for your home theater system. • If you have a device connected - JVC LT-47X898 | Instructions - Page 18
TV in their digital form. R - AUDIO - L R AUDIO INPUT L UDIOFOORUHTDMI 1 R - AUDIO - L TV Rear Panel UDIO AOUUDTIO OUT LR AUDIO OUT DIGITAL OUT RS-232C TV Rear Panel SERVICE the television with a DTV decoder. Notes: • If 480p signals (640x480 or 720x480) are displayed on the screen, the - JVC LT-47X898 | Instructions - Page 19
is the first industry supported, uncompressed, all digital digital television (DTV). RS-232C TV Rear Panel SERVICE ONLY INPUT 5 INPUT 2 DIGITAL signal becomes stable. • This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI. • This JVC television can accept a variety of HD signals - JVC LT-47X898 | Instructions - Page 20
cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL. TV Rear Panel RS-232C SERVICE ONLY INPUT 5 INPUT 2 DIGITAL the DIGITAL SETUP Menu. See page 48. • Refer to your owners manual on using your amplifier. • You cannot output sound from your Optical Output connection - JVC LT-47X898 | Instructions - Page 21
a Red Component Cable from the AV Receiver's PR MONITOR OUT to the PR VIDEO INPUT-3 on the back of the TV. Notes: • Please refer to your AV Receiver instruction manual for more information on connecting your speakers and other devices like a DVD player. • Use your AV Receiver's remote to switch - JVC LT-47X898 | Instructions - Page 22
input terminal to the computer's audio output terminal. Computer PC IN (D-SUB) INPUT 5 TV Rear Panel INPUT 4 VIDEO R - AUDIO - L Y PR PB VIDEO R - SETUP menu to "PC". See page 49. • Refer to your computer manual for a detailed explanation of the connections concerning your computer. • Use - JVC LT-47X898 | Instructions - Page 23
refresh rate to 60 Hz, cannot be used with this TV. Refer to the computer's instruction manual. *Apple Macintosh is a registered trademark of Apple Inc. Note: • If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It appears when the input is PC and it - JVC LT-47X898 | Instructions - Page 24
appear. • Setting the TV's clock to the correct time so your timer functions will work properly. You can choose "AUTO" or "MANUAL" for setting the clock. skip over it. Language After the "JVC INTERACTIVE PLUG IN MENU" has been displayed, the TV automatically switches to the LANGUAGE settings. You - JVC LT-47X898 | Instructions - Page 25
AUTO, the Daylight Saving Time feature automatically adjusts your TV's clock for Daylight Saving. • The real time and D.S.T. may not be set correctly depending on the broadcasting signal and receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF. • You will have to reset - JVC LT-47X898 | Instructions - Page 26
the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your - JVC LT-47X898 | Instructions - Page 27
Certain symbols are used throughout this guide to help you learn about the features of your new television. that appears in green is the one currently selected. If you use the Menu button on the TV's side panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT will - JVC LT-47X898 | Instructions - Page 28
Your television comes with JVC's onscreen menu system. The onscreen menus let you make adjustments to your television's operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about - JVC LT-47X898 | Instructions - Page 29
01 Notes: • The HDMI SIZE menu can only be displayed when a 480p picture signal is input to the HDMI terminal and the picture is being displayed on the screen. mode is THEATER. • When the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu between INITIAL SETUP 05 and PICTURE - JVC LT-47X898 | Instructions - Page 30
when a HDMI or DVI 480p picture signal is input to the HDMI terminal and the picture is have a DVI or HDMI compatible component connected to your TV. π† √® Press the MENU button To VIDEO-1 AUDIO Refer to your DVI or HDMI component's instruction manual for more information. • When you select - JVC LT-47X898 | Instructions - Page 31
PANEL LOCK VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR ON OFF OFF - Use the remote control. - Press the MENU button on the side of the TV for more NEXT PAGE SELECT OPERATE (2/5) MENU EXIT than 3 seconds. In this case, the OSD for FRONT PANEL LOCK will appear. - Unplug the power cord - JVC LT-47X898 | Instructions - Page 32
Initial Setup Menus Video Input Label This function is used to label video input connections for the onscreen displays. π† √® π† √® Press the MENU button To VIDEO INPUT LABEL To enter To select the desired video input To select the desired preset input label (see chart below) Press the OK button - JVC LT-47X898 | Instructions - Page 33
you are in PC Mode • When you are receiving a 1080p signal, Position Adjustment cannot be selected. Power Indicator Power indicator allows selected : The LED disappears if you have a TV signal. The LED is lit as "LOW" when there is no TV signal. NEXT PAGE SELECT OPERATE (2/5) MENU EXIT • When - JVC LT-47X898 | Instructions - Page 34
channels, you can perform Analog Setting of closed caption. When you are watching digital channels, you can perform Digital Auto Setting or Digital Manual Setting. Analog Setting Press the MENU button π† √® π† √® π† √® To CLOSED CAPTION To enter To MODE To select CAPTION or TEXT in MODE To - JVC LT-47X898 | Instructions - Page 35
digital closed caption. Basic: Shows only the analog closed caption. To Service To select 1, 2, 3, 4, 5 or 6 To Appearance To enter To select Auto ("Manual, see page 36) To Set Preview Closed Caption Sample Type Service Appearance Auto 1 Cancel Select Set BACK Operate Back MENU Exit Digital - JVC LT-47X898 | Instructions - Page 36
OK button to save To Set Closed Caption Sample Appearance ModeText Manual White Font Edge White Colors Background Black Opacities Cancel Set available for future use. • Closed captioning may not work correctly if the signal being received is weak or if you are playing a video tape. • - JVC LT-47X898 | Instructions - Page 37
AUTO SHUT OFF IN 9 MIN." appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off. INITIAL SETUP PREVIOUS ILLUMINATION LOW LANGUAGE ENG. FRAN. ESP. CLOSED CAPTION AUTO SHUT OFF OFF XDS ID ON NEXT PAGE SELECT OPERATE - JVC LT-47X898 | Instructions - Page 38
Initial Setup Menus Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. - JVC LT-47X898 | Instructions - Page 39
Initial Setup Menus How to set the channel label. (This is only for analog broadcasting.) Press the MENU button ID π† √® √® √® π† To CHANNEL SUMMARY To operate To the ID column Press the OK button to enter To select the character you want To move to the next space ...continue to follow these - JVC LT-47X898 | Instructions - Page 40
, the message "INVALID LOCK CODE!" will 46. V-Chip Your TV is equipped with signal. Even if you set up V-CHIP ratings limits, these programs will not be blocked. See page 41 for information on how to block unrated programs. Note (for Canadian viewers): The V-Chip function is based on specifications - JVC LT-47X898 | Instructions - Page 41
of Unrated programs: • Emergency Bulletins • News • Public Service Announcements • Sports • Some Commercials • Locally Originated Programming • Political Programs • Religious Programs • Weather Note: • TV programs or movies that do not have rating signals will be blocked if the unrated category - JVC LT-47X898 | Instructions - Page 42
for adults and may be unsuitable for anyone under 17 years of age. TV MA programs may have extensive V, S, L, or D. Viewing Guidelines In addition to the ratings categories explained above, information on specific kinds of content are also supplied with the V-Chip rating. These types of content - JVC LT-47X898 | Instructions - Page 43
Directions to set US V-Chip Ratings Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the the top row, everything in that column is automatically locked. π†√® To the TV 14 Column Press the OK button to lock Press the MENU button when finished - JVC LT-47X898 | Instructions - Page 44
may contain all types of programming including children's programming, foreign programs, or adult material. ❒ G - General Audience In the opinion of the review board, these films contain nothing in the way of sexual content, violence, or language that would be unsuitable for audiences of any age - JVC LT-47X898 | Instructions - Page 45
to change the setup, move the cursor to the column and change the lock icon to "-" by pressing OK again. OK OPERATE MENU EXIT • For instructions on "SET CANADIAN RATINGS FRE (in French)", please see page 45 in the French user - JVC LT-47X898 | Instructions - Page 46
Initial Setup Menus Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of "0000". You may change the code to any four-digit number you wish. To change the lock code, follow - JVC LT-47X898 | Instructions - Page 47
To enter The onscreen will appear Antenna Level Digital Sound Software Version PCM Notes: Software Update • Software Update will only appear when the USB memory is inserted into the USB connector. Select BACK Level To enter The onscreen will appear Antenna Level 75 BACK Back MENU Exit 47 - JVC LT-47X898 | Instructions - Page 48
Initial Setup Menus Digital Sound You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL, you can enjoy listening in 5.1ch sound when watching digital - JVC LT-47X898 | Instructions - Page 49
. Press the MENU button π† √® π† √® π† To DIGITAL SETUP To enter To Software Update To enter Checks if it needs an update or not Press the MENU button when finished V5 INPUT The Video-5 input allows you to choose the signal type you wish to receive that you have connected to Video-5 Input - JVC LT-47X898 | Instructions - Page 50
ENERGY SAVER MODE The energy saver mode adjusts the level of brightness on the TV screen. Adjust the Picture Settings π† √® √® π† π† Press the MENU button status setting has a separate memory for HD (1080i/1080p/720p) and SD (480p/480i) video signal. Each video status can be chosen along with your - JVC LT-47X898 | Instructions - Page 51
Management This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. π† √® π† Press the MENU button To COLOR MANAGEMENT To enter To turn ON or OFF COLOR MANAGEMENT ON OFF Press the MENU button when finished Dynamic Gamma JVC's Dynamic Gamma - JVC LT-47X898 | Instructions - Page 52
Menus Natural Cinema Natural cinema corrects the problem of blurred edges which may occur when the MENU button when finished NATURAL CINEMA AUTO ON OFF Notes: • When you are receiving a 1080p signal, Natural Cinema cannot be selected. • The natural cinema mode is automatically set to "AUTO" in - JVC LT-47X898 | Instructions - Page 53
are receiving digital channels, block noise removal will have no effect. • When you are receiving a 1080p signal, MPEG NR cannot be selected. Smart Sensor This function automatically adjusts the brightness on your TV according to the amount of light in the room. π† √® π† Press the MENU button To - JVC LT-47X898 | Instructions - Page 54
Picture Adjust Menus Theater Pro II It is possible to use Theater Pro II menu only when the Video Status mode is set to THEATER. It adjusts the detailed picture settings. Theater Pro II Menu DSD Detail H.SHARP V.SHARP DSD NOISE CONTROL COLOR TEMPERATURE (RED, BLUE, GREEN) COLOR BALANCE *COLOR - JVC LT-47X898 | Instructions - Page 55
commercial breaks, etc.). BALANCE - Adjust the level of sound between the TV's left and right speakers with the balance setting. Adjust the Sound Settings Press Turn On Volume allows you to set the volume level when you turn the TV on. π† √® Press the MENU button To TURN ON VOLUME To set - JVC LT-47X898 | Instructions - Page 56
AUTO, the Daylight Saving Time feature automatically adjusts your TV's clock for Daylight Saving. • The real time and D.S.T. may not be set correctly depending on the broadcasting signal and receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF. • You will have to reset - JVC LT-47X898 | Instructions - Page 57
TO FINISH SELECT OPERATE MENU EXIT To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the OFF TIME the same way as ON TIME To accept OFF TIME and set, "PLEASE SET CLOCK FIRST !!" will appear on the screen. See Set Clock (choose MANUAL) on page 56 to set the clock. 57 - JVC LT-47X898 | Instructions - Page 58
Power Turns the TV on or off. Press the POWER button Number Buttons - 10Key Pad Use the number buttons on the remote control to move directly to a specific channel. For channels your TV is able to receive. To move rapidly through the channels using JVC's Hyperscan feature, press and hold CH+ or - JVC LT-47X898 | Instructions - Page 59
D23: Press 2 (Two) Press 3 (Three) Press the TUNE button Input Selects the signal input source for the television: VIDEO-1, 2, 3, 4 or 5 for video devices like V3, V4 or V5 button Notes: • When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL +/- button. • You - JVC LT-47X898 | Instructions - Page 60
just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH- buttons. TV - Returns to the TV mode. Press the RETURN+/TV and hold for three seconds RETURN CHANNEL PROGRAMMED! The channel currently - JVC LT-47X898 | Instructions - Page 61
Button Functions Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below. π† Press the FAVORITE button The favorite channel list will appear. To select the channel you want to watch Press the - JVC LT-47X898 | Instructions - Page 62
Button Functions Aspect This feature will help you adjust the picture you are watching to give you the best possible picture quality. Aspect Ratios PANORAMA - With this ratio a normal 4:3 aspect picture is stretched to fit the dimensions of the 16:9 aspect screen. CINEMA - This ratio "zooms in" - JVC LT-47X898 | Instructions - Page 63
turns to FULL automatically when the TV receives an HD (1080i or 720p) signal. • When you are receiving an HDMI 1080p signal in FULL NATIVE mode, you are unable to change the aspect mode. Guide You can view the program information from the GUIDE. Notes: • The GUIDE function will work when you are - JVC LT-47X898 | Instructions - Page 64
and MaxxVolume) individually for each sound mode, see page 55. ML/MTS MTS technology allows several audio signals to be broadcast in analog at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio - JVC LT-47X898 | Instructions - Page 65
TV, V1 - V5) can use the Video Status Mode. STANDARD - Resets the picture display to the factory settings. DYNAMIC - Gives a vivid picture with better contrast status setting has a separate memory for HD (1080i/1080p/720p) and SD (480p/480i) video signal. Each video status can be chosen along with - JVC LT-47X898 | Instructions - Page 66
work for a total time of up to 180 minutes. At first, select TV mode to use the sleep timer function. Press the SLEEP button 0 15 30 display screen shows the current status of timers, inputs and XDS ID. At first, select TV or STB mode to use the display function. See page 68. Press the DISPLAY button - JVC LT-47X898 | Instructions - Page 67
it appears only as Picture Adjust menu. • When you are in PC mode or 1080p mode, TWIN, SWAP, SELECT and FREEZE cannot be used. Swap You can exchange the SWAP button. At first, select TV mode to use the SWAP function. Notes: • It will only work in TWIN mode. • If the signal that you are watching is - JVC LT-47X898 | Instructions - Page 68
Theater in Box Press the MODE button By every press of the Mode button, you can select the mode. TV STB VCR DVD AUDIO • The mode LED indicator on the remote control lights for 3 seconds each time the to operate your other devices. Note: • The remote is preset to control JVC-brand devices. 68 - JVC LT-47X898 | Instructions - Page 69
remote control to operate your external devices, using the instructions and codes on pages 70 - 74. The following down, Number 0 - 9, Tune, Return+/ TV, 70 Muting, Favorite Channel, Menu on/off, Arrow buttons, OK/Enter, Back, DVR (JVC Only)*, Guide (EPG), Sub Channel, Closed Caption, Display ( - JVC LT-47X898 | Instructions - Page 70
1392, 1640 1806 0724, 0722 1535 1535 0869 0856, 1856 DBS/PVR Combination DirecTV Dish Network System Dishpro Echostar Expressvu Hughes Network Systems JVC Motorola Philips Proscan RCA Samsung Sony Star Choice 1377, 0392, 0639, 1142, 1076, 0099, 1392, 1442, 1640 1505, 0775 1505, 0775 1505, 0775 - JVC LT-47X898 | Instructions - Page 71
Gradiente Harley Davidson Harman/Kardon Harwood Headquarter Hewlett Packard HI-Q Hitachi Howard Computers HP Hughes Network Systems Humax Hush iBUYPOWER Jensen JVC KEC Kenwood KLH Kodak LG Linksys Lloyd's Logik LXI Magnasonic Magnavox Magnin Marantz 0047, 0104, 0046 0035, 0033 0000, 0593, 1593 - JVC LT-47X898 | Instructions - Page 72
, 0072 0035, 0000, 0072 0041, 0038 0039, 0033, 0000, 0209, 0034, 0479, 1139, 1479 1972 DBS/PVR Combination Echostar Hughes Network Systems JVC Philips Samsung 1945 0739 1945 0739 0739 PVR ABS Alienware CyberPower Dell DirecTV Dish Network System Echostar Gateway Hewlett Packard 1972 1972 1972 - JVC LT-47X898 | Instructions - Page 73
Apex Digital Aspire Digital CyberHome Denon Funai Gateway Go Video iLo JVC LG LiteOn Magnavox Panasonic Philips Pioneer RCA Samsung Sensory Science Sharp 0630, 0675 1033, 1431 0675 0741 Home Theater in Box Aiwa Audiovox JVC KLH Koss Oritron Polk Audio RCA Rio Sonic Blue Teac Venturer 0641 0790 - JVC LT-47X898 | Instructions - Page 74
Audiovox Bose Brix Cambridge Soundworks Capetronic Carver Classic Coby Criterion Daewoo Delphi Denon Garrard Gateway Go Video Harman/Kardon Initial Insignia Integra JBL JVC Kenwood KLH 0531 1405, 0121, 1243, 1388, 1641 1512 1390 1563, 1615 1563, 1615 1609, 1074 1257, 1430 1189 1390 1229, 0639, 1841 - JVC LT-47X898 | Instructions - Page 75
auto shut off functions that you set, are still active. • If you are watching an analog channel, NO PROGRAM does not appear. Invalid Signal If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It appears when the input is PC and it is a single screen. 75 - JVC LT-47X898 | Instructions - Page 76
Troubleshooting Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television. PROBLEMS the TV. (See page 18). • This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p and 1080i signals. - JVC LT-47X898 | Instructions - Page 77
Troubleshooting PROBLEMS correctly • It is normal for the TV to make crackling sounds when first turned . cut off when you use 1080p format only The screen • This JVC television can accept a variety of HD signals, including 720/60p, 1080/60i and 1080/60p. It does not accept a 1080/24p signal - JVC LT-47X898 | Instructions - Page 78
Specifications Model LT-37X898 LT-42X898 LT-47X898 Audio Dimensions (inch/cm) W X H X D Weight (lbs / kg) Accessories LCD Flat Television NTSC TV set. 240W 37 inch / 94 cm measured diagonally, 16:9 ratio AC 120V, 60 Hz 280W 42 inch / 106.7 cm measured diagonally, 16:9 ratio 355W 47 inch - JVC LT-47X898 | Instructions - Page 79
79 - JVC LT-47X898 | Instructions - Page 80
80 - JVC LT-47X898 | Instructions - Page 81
Notes 81 - JVC LT-47X898 | Instructions - Page 82
Notes 82 - JVC LT-47X898 | Instructions - Page 83
Notes 83 - JVC LT-47X898 | Instructions - Page 84
Notes 84 - JVC LT-47X898 | Instructions - Page 85
Notes 85 - JVC LT-47X898 | Instructions - Page 86
Notes 86 - JVC LT-47X898 | Instructions - Page 87
Notes 87 - JVC LT-47X898 | Instructions - Page 88
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
 |
 |
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet).
Staple your sales receipt or invoice to the inside cover of this
guide.
Keep this user’s guide in a convenient place for future reference.
Keep the carton
and original packaging for future use.
LCT2329-001A-A
0807TNH-II-IM
Model Number:
Serial Number:
Illustration of LT-42X898 and RM-C1400
For Models:
LT-37X898
LT-42X898
LT-47X898
LCD Flat Television Users Guide