JVC LT40X776 Instructions
JVC LT40X776 - LCD Flat Panel Television Manual
 |
UPC - 046838019371
View all JVC LT40X776 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC LT40X776 manual content summary:
- JVC LT40X776 | Instructions - Page 1
LCD Flat Television Users Guide For Models: LT-40X776 LT-37X776 LT-32X776 LT-26X776 Illustration of LT-32X776 and RM-C14G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice - JVC LT40X776 | Instructions - Page 2
into the cabinet openings. 5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. Changes or modifications not approved by JVC could void the warranty. * When you don't use this TV set for a long period of time, be - JVC LT40X776 | Instructions - Page 3
. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power 12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold - JVC LT40X776 | Instructions - Page 4
unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way is impossible. When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly - JVC LT40X776 | Instructions - Page 5
• Bright station logos • Internet web sites or other computer-style images. • DVD discs, video tapes, laser discs • Broadcast, cable, satellite channels or digital television tuners/converters. For example... TV on TV off XYZ XYZ Caring for the Cabinet Normally, light dusting with a soft, non - JVC LT40X776 | Instructions - Page 6
to move the cabinet Your fingers may become trapped under the TV, causing injuries. Hold the TV at the bottom in the middle, and do not allow the TV to tilt up or down. The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up or down. 6 - JVC LT40X776 | Instructions - Page 7
Important Safety Precautions . 2 Warnings 5 Quick Setup 9 Unpacking your TV 9 TV Models 10 TV Remote Control 11 Getting Started 12 Using the Stand 12 The Remote Control 14 Connecting Your Devices 15 Interactive Plug In Menu 25 Remote Programming . . . . . 28 Setting CATV, VCR and DVD Codes - JVC LT40X776 | Instructions - Page 8
Menu 74 Controller 74 Device 75 Timer 76 Reservation 76 Timer Edit 77 Guide 78 Media Card Viewer 79 Readable Media Card 79 Supported Card Media 79 How to insert Media Card 80 How to operate Media Card Viewer . . . . 81 PHOTO 82 VIDEO 82 FILE 83 Operation Note 84 Specifications for - JVC LT40X776 | Instructions - Page 9
1 Remote Control TV CATV VCR DVD POWER ASPECT MULTI SCREEN TWIN INDEX SELECT SLEEP FREEZE SWAP ML/MTS DISPLAY + INPUT 123 D/A 4 5 6 i.LINK MENU 7 TIMER TUNE THEATER FAVORITE PRO C.C. SOUND 8 0 VIDEO STATUS NATURAL CINEMA 9 RETURN+ TV SUB CHANNEL SUB LIGHT MUTING CH GUIDE VOL - JVC LT40X776 | Instructions - Page 10
specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Rear Panel Diagram INPUT 1 INPUT 2 INPUT 3 S-VIDEO VIDEO OVER R - AUDIO - L S-VIDEO VIDEO OVER R - AUDIO - L VIDEO - JVC LT40X776 | Instructions - Page 11
Setup TV Remote Control TV CATV VCR DVD POWER ASPECT MULTI SCREEN TWIN INDEX SELECT SLEEP FREEZE SWAP ML/MTS DISPLAY + INPUT 123 D/A 4 5 6 i.LINK MENU 7 TIMER TUNE THEATER FAVORITE PRO C.C. SOUND 8 0 VIDEO STATUS NATURAL CINEMA 9 RETURN+ TV SUB CHANNEL SUB LIGHT MUTING CH GUIDE - JVC LT40X776 | Instructions - Page 12
1 - Using the stand This TV comes with a Table Top Stand already attached. This stand can be used to adjust the direction of the TV screen 5° up, 10° down and 20° to the left or right. These illustrations are for LT-26X776 and LT-32X776. The stands for the LT-37X776 and LT-40X776 are different. You - JVC LT40X776 | Instructions - Page 13
side of the covers against the TV and insert the hooks. Note: • Leave the terminal covers off if they do not fit properly. Do not force to replace the covers. Doing so may damage the connection cables and covers. Illustration of LT-32X776 and LT-26X776 Illustration of LT-37X776 and LT-40X776 13 - JVC LT40X776 | Instructions - Page 14
used with JVC's onscreen menu system. To use the onscreen menus, press the MENU button. MUTING CH GUIDE VOL OK control a VCR. Slide to DVD to control a DVD player. Please see pages 28 to 31 for instructions on programming your remote control to operate a cable box, VCR or DVD player. POWER T TV - JVC LT40X776 | Instructions - Page 15
Video Cable Component Cables Composite Cables Audio Cables Used to make video connections with S-Video VCRs, Camcorders and DVD players. Used to connect audio/video you have a satellite television system, refer to the satellite TV manual. No VCR Connection Cable or Antenna Output (7V5HΩF/UHF) - JVC LT40X776 | Instructions - Page 16
for DVD cables. Some models may vary colors. Please consult the user's manual for your DVD player VIDEO VIDEO R - AUDIO - L S-VIDEO VIDEO R - AUDIO - L (7V5HΩF/UHF) INPUT 2 INPUT 3 DIGITAL IN AUDIO INPUT 1 COMPONENT VIDEO R - AUDIO - L Y Pr Pb R - AUDIO - L ATSC / DIGITAL CABLE IN TV - JVC LT40X776 | Instructions - Page 17
VIDEO R - AUDIO - L S-VIDEO VIDEO R - AUDIO - L VIDEO R - AUDIO - L Y Pr Pb R - AUDIO - L INPUT 3 Connections Cable or Antenna Output IN OUT OUT Two-Way Splitter IN Two-Way Splitter OUT OUT (Attachment) Coaxial Cable (Attachment) (7V5HΩF/UHF) ATSC / DIGITAL CABLE IN TV Rear Panel - JVC LT40X776 | Instructions - Page 18
RIGHT AUDIO OUT, into the RIGHT AUDIO IN on the back of the TV. Note: • If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the LEFT AUDIO IN on the back of the TV. + VOLUME - POWER Headphone Connection You can connect a pair of headphones to the - JVC LT40X776 | Instructions - Page 19
• Refer to your amplifier's manual for more information. • You can use AUDIO OUTPUT for your home theater system. • DVI analog sound can not be outputted. Connecting to Monitor/Recording Output Terminal AUDIOMOUNITTOR / REC OUT S-VIDEO VIDEO OVER RR - AUDIO - L L TV Rear Panel VCR IN OUT OR - JVC LT40X776 | Instructions - Page 20
you can watch picture sources from many different devices, without having to change or use the other input connections on your TV. This allows you OUT, into the Pr VIDEO INPUT-1 on the back of your television. Notes: • Please refer to your AV Receiver instruction manual for more information on - JVC LT40X776 | Instructions - Page 21
TV Rear Panel R - AUDIO - L VIDEO R - AUDIO - L Y Pr Pb R - AUDIO - L DIGITAL IN AUDIO INPUT 1 COMPONENT DIGITAL-IN AUDIO OUT CABLE CARD TV Rear Panel R L HDMI -in terminal is not compatible with the picture signal of a personal computer. • Use a HDMI to DVI cable (commercially available) in - JVC LT40X776 | Instructions - Page 22
high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible device. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and - JVC LT40X776 | Instructions - Page 23
the amplifier. Notes: • This terminal can only output digital audio. • In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in the Digital Setup Menu. See page 71. • Refer to your owners manual on using your amplifier. 23 - JVC LT40X776 | Instructions - Page 24
devices equipped with an i.LINK connector to exchange digital video signals, digital audio signals and device control signals bi-directionally over a single cable. (For example, a JVC D-VHS VCR). i.LINK refers to the IEEE1394-1995 industry specification and extensions thereof. The logo is used for - JVC LT40X776 | Instructions - Page 25
to appear. • Setting the TV's clock to the correct time so your timer functions will work properly. You can choose "AUTO" or "MANUAL" for setting the clock. skip over it. Language After the "JVC INTERACTIVE PLUG IN MENU" has been displayed, the TV automatically switches to the LANGUAGE settings. - JVC LT40X776 | Instructions - Page 26
not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal: SET MODE is set to AUTO, the Daylight Savings Time feature automatically adjusts your TV's clock for Daylight Savings. The clock will move forward one hour at 2: - JVC LT40X776 | Instructions - Page 27
setup, the TV automatically scans through on in this guide for more information on programming your remote control, or using the JVC onscreen menu system it finished without doing the Auto Tuner Setup. Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on - JVC LT40X776 | Instructions - Page 28
or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The remote control is programmed with cable box and - JVC LT40X776 | Instructions - Page 29
remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to "TV 071, 091 Funai G.E. Go Video 027, 026, 020, 000 JVC - JVC LT40X776 | Instructions - Page 30
DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to "TV" and the - JVC LT40X776 | Instructions - Page 31
responds. 4) If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for the DVD player), and there is no response, use the remote control that came with your equipment. 5) Press RETURN - JVC LT40X776 | Instructions - Page 32
MENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV's side panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The "interactive - JVC LT40X776 | Instructions - Page 33
. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 25 - 27. The Onscreen Menu System To open the onscreen menu system, press the MENU button on the remote control. You navigate within the onscreen menus by using the - JVC LT40X776 | Instructions - Page 34
terminal and the picture is being displayed on the screen. • When the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear. • Regarding the digital setup menu, see page 70. • MEDIA CARD VIEWER is for LT-40X776 ONLY. 34 - JVC LT40X776 | Instructions - Page 35
Initial Setup Auto Tuner Setup The auto tuner setup function is described on page 27 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. π† √® π† √® π† √® Press the MENU button To AUTO TUNER SETUP To operate To TUNER MODE (IN ANALOG) To choose - JVC LT40X776 | Instructions - Page 36
Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from the line-up or prevent : Below screen appears Both analog and digital channels are listed, but the background video is not displayed. 36 - JVC LT40X776 | Instructions - Page 37
Notes: • You can use characters for: Alphabet, numbers, marks and spaces. • It is possible to set the maximum of 40 channel labels. • If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will appear. You can block access to a channel by activating the channel lock. Press the - JVC LT40X776 | Instructions - Page 38
also "Set Lock Code", page 44. V-Chip Your TV is equipped with V-Chip technology which enables you to Canada rating guidelines. V-Chip has no effect on video signals from a DVD discs, VCR tapes or ): The V-Chip function is based on specifications designed for the United States and therefore may - JVC LT40X776 | Instructions - Page 39
Programming" category. Examples of Unrated programs: • Emergency Bulletins • News • Public Service Announcements • Sports • Some Commercials • Locally Originated Programming • Political Programs • Religious Programs • Weather Note: • TV programs or movies that do not have rating signals will be - JVC LT40X776 | Instructions - Page 40
. ❒ TV G stands for General specific kinds of content are also supplied with the V-Chip rating. These types of content may also be blocked. The content types are: • V/FV is for VIOLENCE/FANTASY VIOLENCE • S stands for SEXUAL CONTENT • L stands for strong LANGUAGE • D stands for suggestive DIALOG 40 - JVC LT40X776 | Instructions - Page 41
Directions to set US V-Chip Ratings Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the the top row, everything in that column is automatically locked. π†√® To the TV 14 Column Press the OK button to lock Press the MENU button when finished - JVC LT40X776 | Instructions - Page 42
may contain all types of programming including children's programming, foreign programs, or adult material. ❒ G - General Audience In the opinion of the review board, these films contain nothing in the way of sexual content, violence, or language that would be unsuitable for audiences of any age - JVC LT40X776 | Instructions - Page 43
news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C - Programming Intended for Children SELECT OK OPERATE MENU EXIT Note: • For instructions on "SET CANADIAN RATINGS FRE (in French)", please see page 43 in the French side of - JVC LT40X776 | Instructions - Page 44
Initial Setup Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of "0000". You may change the code to any four-digit number you wish. To change the lock code, follow - JVC LT40X776 | Instructions - Page 45
Initial Setup Auto Demo This function lets you preview the Dynamic Gamma demo. Press the MENU button π† √® To AUTO DEMO To turn AUTO DEMO ON or OFF Notes: • Auto demo starts 2 seconds after it is set to ON. • To stop auto demo, press the BACK button. INITIAL SETUP PREVIOUS AUTO TUNER SETUP - JVC LT40X776 | Instructions - Page 46
When you are watching digital channels, you can perform Digital Auto Setting or Digital Manual Setting. Analog Setting Press the MENU button π† √® π† √® π† √® the digital closed caption. Basic: Shows only the analog closed caption. To Service To select 1, 2, 3, 4, 5 or 6 To Appearance To enter - JVC LT40X776 | Instructions - Page 47
To Type To select Auto, Advanced or Basic To Service To select 1, 2, 3, 4, 5 or 6 To Appearance To enter To select Manual To Font To enter To select Font Size or the signal being received is weak or if you are playing a video tape. • Most broadcasts containing closed captioning will display a notice - JVC LT40X776 | Instructions - Page 48
blinking text "NOT RECEIVING A SIGNAL" appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off. INITIAL SETUP PREVIOUS ILLUMINATION LOW LANGUAGE ENG. FRAN. ESP. CLOSED CAPTION AUTO SHUT OFF OFF XDS ID ON NEXT PAGE SELECT - JVC LT40X776 | Instructions - Page 49
SETUP PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE ON OFF ON LOW (2/5) MENU EXIT • Use the remote control. • Press the MENU button on the side of the TV for more than 3 seconds. In this case, the OSD for - JVC LT40X776 | Instructions - Page 50
input INITIAL SETUP PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR NEXT PAGE SELECT OPERATE VIDEO INPUT LABEL VIDEO-1 VIDEO-2 VIDEO-3 DIGITAL-IN ON OFF ON LOW (2/5) MENU EXIT VCR DVD SAT STB PRESS OK TO FINISH SELECT OPERATE MENU EXIT - JVC LT40X776 | Instructions - Page 51
adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to on the TV, the power indicator will light even if the TV is on stand by. Video-1 Monitor Out This function allows you to set whether the signal, which comes from VIDEO-1 input terminal - JVC LT40X776 | Instructions - Page 52
of digital audio and video, choose DIGITAL. If your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG. • Refer to your DTV or HDMI component's instruction manual for more information. • When you select DIGITAL, select PCM on Digital Sound in the Digital Setup - JVC LT40X776 | Instructions - Page 53
colors in the TV picture appear either more vivid or subtle. PICTURE Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker or brighter picture overall. BRIGHT You can adjust the overall brightness of the TV picture with the Bright control. DETAIL The Detail - JVC LT40X776 | Instructions - Page 54
LOW HIGH Press the MENU button when finished Color Management This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to button when finished Dynamic Gamma JVC's Dynamic Gamma Circuitry (DGC makes it easier to see dark areas when a picture has many dark areas, and - JVC LT40X776 | Instructions - Page 55
"ON" or "OFF" Press the MENU button when finished SMART PICTURE ON OFF Note: • When you have "DYNAMIC" selected in the "VIDEO STATUS", Smart Picture is not selected. Reset Reset resets all picture adjustments (tint, color, picture, bright, detail, energy saver mode, color temperature, dig. noise - JVC LT40X776 | Instructions - Page 56
You can increase or decrease the level of low-frequency sound in the TV's audio with the bass adjustment. TREBLE - Use treble to adjust the level of high-frequency sound in your TV's audio. BALANCE - Adjust the level of sound between the TV's left and right speakers with the balance setting. Adjust - JVC LT40X776 | Instructions - Page 57
to finish Press the MENU button when finished When you set the clock manually, choose MANUAL by pressing the √ or ® arrows. SET CLOCK MODE TIME TIME ZONE set to AUTO, the Daylight Savings Time feature automatically adjusts your TV's clock for Daylight Savings. The clock will move forward one hour - JVC LT40X776 | Instructions - Page 58
To ON/OFF TIMER To operate (begins with ON TIME) To set the hour (AM/PM) you want the TV to turn on ON/OFF TIMER ON TIME OFF TIME CHANNEL ON VOLUME MODE ON/OFF TIMER 7:00 PM 10:00 EXIT To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the OFF TIME the same way as ON TIME - JVC LT40X776 | Instructions - Page 59
remote control. The channel (or input) you were watching before pressing Twin will appear on the left, the new channel will appear on the right. The sound button. 07 MAIN SCREEN PICTURE V-1 SPLIT SCREEN PICTURE Notes: • If the signal that you are watching is coming from the HDMI input, you cannot - JVC LT40X776 | Instructions - Page 60
the screen to change to the split-screen display with the still picture displayed on the right. In order to return to the normal • It will only work in TWIN mode. Select With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you press SELECT button, the channel number on - JVC LT40X776 | Instructions - Page 61
the power button on the TV, and you are tuned to a digital channel or i.Link, "NOW WARMING UP... PLEASE WAIT" appears on the screen. It takes a little while to warm up. Number Buttons - 10Key Pad Use the number buttons on the remote control to move directly to a specific channel. For example, to - JVC LT40X776 | Instructions - Page 62
specific channel to return to while scanning through the channels using the CH+ and CH- buttons. TV - Returns to the TV mode. Press the RETURN+/TV sound with boosted bass. Press the SOUND button SOUND EFFECT A.H.S. MOVIE MUSIC OFF π† To select A.H.S., BBE, SMART SOUND or A.H.B. BBE SMART SOUND - JVC LT40X776 | Instructions - Page 63
PANEL screen by using the MENU button on the side of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose VIDEO STATUS by pressing MENU† on the side panel and choose a mode by using the CHANNEL +/- buttons - JVC LT40X776 | Instructions - Page 64
technology allows several audio signals to be broadcast in analog at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program (SAP). Press the ML/MTS button By every press of the ML - JVC LT40X776 | Instructions - Page 65
mode by pressing the π† buttons. CLOSED CAPTION OFF SMART CAPTION ON Channel +/- Use these buttons to move up or down all the available channels your TV is able to receive. Volume +/- Use these buttons to raise or lower the - JVC LT40X776 | Instructions - Page 66
Button Functions Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below. Press the FAVORITE button The favorite channel list will appear. π† To select the channel you want to watch 101 - JVC LT40X776 | Instructions - Page 67
is stretched to fit the dimensions of the 16:9 aspect screen. CINEMA - This ratio "zooms in" on the center part of a 4:3 aspect picture, blowing it up to fill the 16:9 screen. REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying - JVC LT40X776 | Instructions - Page 68
Media Card Viewer mode, Aspect can not be used. (LT-40X776 Only) Menu The MENU button allows you to access JVC's onscreen menu system. Press MENU to activate the onscreen menu system. • See individual topics like "Sound Adjust" for specific information on using menus. OK This button confirms your - JVC LT40X776 | Instructions - Page 69
buttons on the lower part of the remote control. Move the slide switch to VCR or DVD to operate. Notes: • The remote is preset with the code 000 to control JVC-brand VCR's. For any other manufacturer's brand VCR, please see the code chart and instructions on page 29. • The remote is preset with the - JVC LT40X776 | Instructions - Page 70
receiving a digital broadcast. Press the MENU button Digital Setup π† √® To DIGITAL SETUP To enter The onscreen will appear Antenna Level Digital Sound Aspect Ratio Cable Card Application PCM 4:3 Notes: i.LINK Auto Play OFF Software Update • Software Update will only appear when the SD - JVC LT40X776 | Instructions - Page 71
, select PCM. If you don't select PCM, it cannot output the sound from the speakers. • For connecting an amplifier using the optical output, same as the TV's aspect ratio when the recorded program is played back, so that you can obtain a good picture quality, free from any unatural distortions. - JVC LT40X776 | Instructions - Page 72
Press the OK button The application will perform i.LINK Auto Play When playing a D-VHS tape, you can set it to the i.LINK input automatically, or manually. Press the MENU button π† √® π† √® To DIGITAL SETUP To enter To i.LINK Auto Play To select ON or OFF ON: Set to i.LINK input automatically - JVC LT40X776 | Instructions - Page 73
forth the analog and digital channels. Digital channels have a "D" in front of the channel number. Note: • If the cable card is inserted into the TV, you cannot use the D/A button. You can select a digital channel only. Press the D/A button To watch digital channels For example, to move to channel - JVC LT40X776 | Instructions - Page 74
page 24. • When operating the i.LINK, don't insert or disconnect the i.LINK cable. Controller You can operate a D-VHS VCR connected with an i.LINK cable by using this controller. Notes: • If the i.LINK is not connected, the Controller OSD will not appear. The OSD of device on page 75 will appear - JVC LT40X776 | Instructions - Page 75
Digital Button Functions Device To operate, select a device. π† i.LINK Controller Renumber Device Page 2/3 D-VHS1 JVC HM-DH30000U D-VHS2 JVC HM-DH40000U HD-MOVIE 1 JVC GR-HD1 To select your device connecting with i.LINK Press the OK button Notes: • If you do not select the device, - JVC LT40X776 | Instructions - Page 76
Digital Button Functions Timer You can set the two timers: Record and view. The timer starts the recording or turns to the channel you set for it automatically. Reservation Press the TIMER button π† To New Reservation Press the OK button Timer New Reservation Sept. 10 (Wed) 4:55PM Timer Mode - JVC LT40X776 | Instructions - Page 77
Digital Button Functions Timer Edit When you want to confirm the timer you set or edited, or delete the timer setting, use this function. Timer Edition π† Press the TIMER button To select the timer list you want to edit Press the OK button Timer Timer Edit Sept. 10 (Wed) 4:55PM Timer Mode - JVC LT40X776 | Instructions - Page 78
KDVRet Retailer News Channel Sept. 11 (Wed) 6:00PM - 7:00PM Mon - Fri No Yes Guide You can view the program from the GUIDE. Notes: • The GUIDE function will only work when you are receiving digital programming only. • The GUIDE will not show the correct time and date if you have not performed - JVC LT40X776 | Instructions - Page 79
Card Viewer Note: • Media Card Viewer is for LT-40X776 Readable Media Card This TV can read the following media cards: SD Card, MMC (Multi Media Card), Memory Stick, xD-Picture Card, CF Card (CompactFlash Card), Removable microdrive Hard Disk for JVC digital media camera "Everio" (a type of CF Card - JVC LT40X776 | Instructions - Page 80
screen. Then, close the door. To remove the media card, press the card into the slot again after opening the door. xD-Picture Memory Stick SD or MMC xD-Picture Card MEMORY STICK PUSH-OPEN SD/ MMC Close door when using media cards. COMPACT FLASH Ridge CF *Removable Microdrive Hard Disk does - JVC LT40X776 | Instructions - Page 81
or FILE will appear SELECT ONE, AND PRESS OK PHOTO VIDEO FILE √® To select PHOTO, VIDEO or FILE (Continue to page 82 or 83) Notes: • The above screen will change depending on the type of card you insert. • The sound from the media card can not be changed. • Onscreen language is linked to - JVC LT40X776 | Instructions - Page 82
Press the OK button The right nine images appear. π†√® To select an image that you like C F Press the OK button The video show starts. Notes: Page • To stop the video show, press the BACK button. 0001/ 0003 • The volume can not be changed when these nine images appear. • In the playback - JVC LT40X776 | Instructions - Page 83
video playback may be choppy or other playback problems may occur. Storage of different file types in separate folders is recommended. • When video or still images are recorded by Everio, only video some JVC digital cameras). This will the TV. byte characters are not supported. • The display order - JVC LT40X776 | Instructions - Page 84
or Play (Each pressing will switch back and forth) 2) When you select FILE icon and play the PHOTO or VIDEO: While playing PHOTO - You cannot use CH+/CH- and VOL+/While playing VIDEO - You cannot use CH+/-. You can change volume by using VOL+/-. Note: While using the card viewer, do not - JVC LT40X776 | Instructions - Page 85
FAT32 (3) VFAT 3) Supported data management standards (1) DCF 2.0 (still image) (2) SD-Picture (still image) (3) SD-Video Entertainment Video Profile (video) compliant (Video: MPEG2-PS MP/ML, Audio: AC-3 / 48 kHz sampling) (4) SD-Video Mobile Video Profile (video) compliant (Video: MPEG4 Simple pro - JVC LT40X776 | Instructions - Page 86
that you have selected is too weak to receive or no signal is being detected for that channel. Weak Signal 15 No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving - JVC LT40X776 | Instructions - Page 87
Cable Card Information Cable card offers information when a cable card is inserted into the CABLE CARD slot on the back of the television. Notes: • Please contact your local cable company regarding detailed information. • When the cable card is inserted into the cable card slot, if you turned the - JVC LT40X776 | Instructions - Page 88
is no picture or sound • The antenna could be disconnected. • The input mode could be set improperly. See page 61. • The tuner (Auto Tuner Setup) could be set improperly. See page 35. • The TV station may be having difficulties. Check to see if other stations are working. Remote control is not - JVC LT40X776 | Instructions - Page 89
Troubleshooting PROBLEMS Static electricity CHECK • It is normal to feel static electricity if you brush or touch the screen. You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless crackling sounds the sound or picture become abnormal, this is - JVC LT40X776 | Instructions - Page 90
90 - JVC LT40X776 | Instructions - Page 91
91 - JVC LT40X776 | Instructions - Page 92
Specifications Model LT-26X776 LT-32X776 Type LCD Flat Television Reception Format NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable Reception Range VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper and Ultra bands (191 channel frequency - JVC LT40X776 | Instructions - Page 93
Specifications Model LT-37X776 LT-40X776 Type LCD Flat Television Reception Format NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable Reception Range VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper and Ultra bands (191 channel frequency - JVC LT40X776 | Instructions - Page 94
Notes 94 - JVC LT40X776 | Instructions - Page 95
Notes 95 - JVC LT40X776 | Instructions - Page 96
JVC COMPANY OF AMERICA Division of JVC Americas Corp. 1700 Valley Road Wayne, New Jersey, 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
 |
 |
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet).
Staple your sales receipt or invoice to the inside cover of this
guide.
Keep this user’s guide in a convenient place for future reference.
Keep the carton
and original packaging for future use.
LCT1881-001B-A
0505TNH-II-IM
Model Number:
Serial Number:
Illustration of LT-32X776 and RM-C14G
For Models:
LT-40X776
LT-37X776
LT-32X776
LT-26X776
LCD Flat Television Users Guide