JVC MX-KA3 Instruction Manual
JVC MX-KA3 - Mini Shelf System Manual
 |
UPC - 046838259494
View all JVC MX-KA3 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC MX-KA3 manual content summary:
- JVC MX-KA3 | Instruction Manual - Page 1
COMPACT COMPONENT SYSTEM MX-KA3 Consists of CA-MXKA3 and SP-MXKA3 SP-MXKA3 CA-MXKA3 SP-MXKA3 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. - JVC MX-KA3 | Instruction Manual - Page 2
CA-MXKA3 10cm (3 15/16 in) CAUTION 1. Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) 2. Do not place any naked flame sources, such as lighted candles, on the apparatus. 3. When - JVC MX-KA3 | Instruction Manual - Page 3
Introduction Thank you for purchasing the JVC Compact Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set - JVC MX-KA3 | Instruction Manual - Page 4
BASS EX 8 Emphasizing the Sound (SOUND TURBO 8 Selecting the Sound Mode (SOUND MODE 8 Entering the Number with the Remote Control (Numeric Keys 8 Using the Tuner ...9 Tuning In a Station SLEEP Timer ...24 Timer Priority ...24 Care And Maintenance 25 Troubleshooting ...26 Specifications ...26 2 - JVC MX-KA3 | Instruction Manual - Page 5
mark is pointed at is the same as the voltage. Voltage mark CAUTION: • Make all connections before plugging the System into an AC power outlet. How To Put Batteries In the Remote Control Match the polarity (+ and -) on the batteries with the + and - markings in the battery compartment. R6P(SUM-3)/AA - JVC MX-KA3 | Instruction Manual - Page 6
it easy to use many of the functions of the System from a distance of up to 7m away. You need to point the Remote Control at the remote sensor on the System's fron panel. Remote sensor CAUTION: • Make all connections before plugging the System into an AC power outlet. Connecting the FM Antenna - JVC MX-KA3 | Instruction Manual - Page 7
connected. CAUTION: • To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord. Connecting the Speakers left side speaker to the red (+) and black (-) terminals marked LEFT on the System. 3. Close each of the terminals. Right side (rear view) Left side (rear - JVC MX-KA3 | Instruction Manual - Page 8
to the Wall Outlet Plug the AC power cord into the wall outlet. Now, your System is at your command! DEMO Mode When the System is connected to the wall outlet, a DEMO mode displaying some of the system's features automatically starts. To turn the DEMO display off, press any of the operation buttons - JVC MX-KA3 | Instruction Manual - Page 9
STANDBY indicator lights up. (The display is dimmed.) • Some power is always consumed even though power is turned off (called Standby mode). • To switch off the System + button on the Remote Control to increase the volume or press the VOLUME - button on the Remote Control to decrease the volume - JVC MX-KA3 | Instruction Manual - Page 10
) button. The "BASS" indicator lights up and "ACTIVE BASS EXTENSION" appears stereo systems. OFF No sound effect applies. On the Remote Control Press the SOUND MODE button until Sound Mode you want appears on the display. The Sound Mode indicator that corresponds to the selected sound mode - JVC MX-KA3 | Instruction Manual - Page 11
down the 4 button on the Unit in Standby mode, press the % STANDBY/ON button on the Unit to turn on the power. [10 kHz Intervals] [9 kHz Intervals] STANDBY STADBY / ON STANDBY STADBY / ON One Touch Radio Just press the FM/AM button to turn on the System and start playing the station you were - JVC MX-KA3 | Instruction Manual - Page 12
tuned in to an FM stereo broadcast, the "ST (Stereo)" indicator lights up and you can hear stereo effects. If an FM stereo broadcast is hard to receive or noisy, you can select Monaural mode. Reception improves, but you lose stereo effect. Press the FM MODE button on the Remote Control so that the - JVC MX-KA3 | Instruction Manual - Page 13
-CD3 CD Open/ Close 0 DISC SKIP 7 ¡ 22 CD 6 Play mode indicator Repeat indicator * When the System is in use, the display shows other items as well. For simplicity, we indicators: Disc Number indicator: Lights all the time. Selected Disc indicator:Lights for the currently selected disc number. 11 - JVC MX-KA3 | Instruction Manual - Page 14
comes on, and operations are done automatically. ❏ By pressing the CD 6 button, the System will come on, and if a CD is loaded for the disc number that was playing from the first track. ❏ By pressing the CD1-CD3 button, the System will come on, and if a CD is already loaded for the selected disc - JVC MX-KA3 | Instruction Manual - Page 15
of the previous track. (You cannot skip back to the previous CD.) In Stop mode (using the 4 or ¢ button): By briefly pressing the 4 or ¢ button, • 22 or ¡ button on the Unit • 4 or ¢ button on the Remote Control Total track number Total playing time (After 3 seconds) Track number Playing time To - JVC MX-KA3 | Instruction Manual - Page 16
4 or ¢ button on the Remote Control. To delete all the tracks Press the CD 6 button. The System plays the tracks in the order mode. To re-enter Program Play mode, press the PROGRAM or PROGRAM/RANDOM button until the "PRGM" indicator lights up again. • Even when the power is turned off (standby mode - JVC MX-KA3 | Instruction Manual - Page 17
mode, while the CD Player is stopped, press the RANDOM button on the Unit or the PROGRAM/RANDOM button on the Remote Control again to light . Locking the Tray 1 Turn on the System and enter CD mode. 2 While pressing down the 7 button, press the CD Open/Close 0 button on the Unit. "LOCKED" appears - JVC MX-KA3 | Instruction Manual - Page 18
When the cassette holder opens, put a cas- sette in, with the exposed part of cassette holder does not open, turn the System off, then back on and press the Deck A is selected, the Deck indicator "A" lights up. • To change the deck, press on the Remote Control.) During playback or in Stop mode, press - JVC MX-KA3 | Instruction Manual - Page 19
EJECT (Deck B) TAPE 3 3: Tape indicator Deck indicators REC indicator * When the System is in use, the display shows other items as well. For simplicity, we show set correctly, so it is not affected by the VOLUME Control on the System. Also, it is not affected by adjusting the sound effects. Thus, - JVC MX-KA3 | Instruction Manual - Page 20
CD REC" appears on the display and the "REC" indicator lights up. Then, the System begins CD Synchro Recording and the tracks on the CD are Press the REC START/STOP button on the Unit. The "REC" indicator lights up and the System begins recording. The Tape indicator (3) blinks on the display. • If - JVC MX-KA3 | Instruction Manual - Page 21
First, make sure that the external equipment is properly connect- ed to the System. (See page 6.) 1 Set the volume level to the minimum posi- 8.) • Sound Mode (See page 8.) To exit AUX mode, select other source (e.g. Tuner). • For operation of the external equipment, refer to its Instructions. 19 - JVC MX-KA3 | Instruction Manual - Page 22
and length of the recording. SLEEP Timer Fall asleep and have your System turn off automatically after a certain length of time. Setting the Clock You can set the clock whether the System is on or off. • The clock must be correctly set for the timers to work. • Each setting step must be completed - JVC MX-KA3 | Instruction Manual - Page 23
not work, lights up on the display. Each time you press the button, the display changes as follows: TIMER = ON TIME* = REC = ON TIME = Clock setting display = Canceled = (back to the beginning) *: This item should be selected for the Daily Timer setting. Then, the System enters ON-time setting mode - JVC MX-KA3 | Instruction Manual - Page 24
Then, the System enters Volume Setting mode. When selecting Timer. 8 Press the % STANDBY/ON button to turn off the System. The Timer indicator ( ) indicator blinks and the Timer indicator ( ) lights up on the dispaly. 2 Press the SET If the CANCEL button does not work, press the CLOCK/TIMER button - JVC MX-KA3 | Instruction Manual - Page 25
press the SET button. The System enter Preset Station Entering mode. 5 Select the preset station % STANDBY/ON button to turn off the System, if the System automatically turns off. • The REC Timer works even if the System is display. The Timer indicator ( ) lights and the "REC" indicator blinks on - JVC MX-KA3 | Instruction Manual - Page 26
turn off by itself rather than play all night. • You can only set the Sleep Timer when the System is on. Using the Remote Control 1 During playback a source, press the SLEEP button. The "SLEEP" indicator starts blinking on the display. 2 Set the length of time you want the source - JVC MX-KA3 | Instruction Manual - Page 27
Compact Discs Recordable • Only CDs bearing these marks can be used with this System. However, continued use of irregular shape CDs (heartshape, octagonal, etc.) can damage the System holding it at the edges while pressing the case's center hole lightly. • Do not touch the shiny surface of the CD, - JVC MX-KA3 | Instruction Manual - Page 28
Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service. - JVC MX-KA3 | Instruction Manual - Page 29
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and U.K.) IMPORTANT for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
INSTRUCTIONS
LVT1013-007A
[UJ]
COMPACT COMPONENT SYSTEM
MX-KA3
Consists of CA-MXKA3 and SP-MXKA3
CA-MXKA3
SP-MXKA3
SP-MXKA3