JVC PS-470W PS-420W / PS-470W 42-in/47-in digital signage monitors operation
JVC PS-470W Manual
View all JVC PS-470W manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC PS-470W manual content summary:
- JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 1
OWNER'S MANUAL Digital Signage LCD Display MODELS: PS-420W PS-470W - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 2
fire. n Do not insert metal or other conductive materials into the display openings. Additionally, do not touch the power cord right after plugging the cable into the wall input terminal. - You may be electrocuted. n The power supply cord is used as the main disconnection device. The socket-outlet - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 3
damage. n Do not add accessories that have not been designed for this display. n If you smell smoke or other odors or hear a strange sound from the display, unplug the power cord and contact Customer Service (Please refer to the label on the rear cover). - If you continue to use without taking - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 4
display yourself. - Fire or electric shock can occur. - Contact Customer Service (Please refer to the label on the rear cover) for repair. n When cleaning the display, unplug the power saver on the display. Burn-in and related problems are not covered by the warranty on this display. n Spray water - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 5
Operating usages under abnormal condition a. Ambient condition - Well-ventilated place is recommended to set up the system. b. Power and screen saver - Periodical power-off or screen saver is needed after long-term display. n Operating usages to protect against image sticking due to long-term static - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 6
the display. v The accessories included may differ from the images shown below. POWER INPUT OK MENU BACKLIGHT Remote Control & Batteries (AAA × 2) HDMI Cable Power Cord *Power Cord for EU (Optional) Vesa Mount Screws CD-ROM (User's Manual) (4 pcs)(Size : M6 × L20) Quick Start Guide DMP - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 7
Portrait Mode To change the display orientation to Portrait mode, rotate the display counterclockwise as shown below. 6 - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 8
tuning bar. • Change the options. Down • Move downward on the selection. • Change selected item. Menu • Display OSD (on-screen display) menu. • Return to the previous menu. • Exit OSD menu. POWER INPUT OK MENU BACKLIGHT Input Switch the input source. Up • Move upward on the selection. • Change - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 9
Name and Function of the Parts * The image shown in the user's guide could be different from the actual image. Front View 12 No. Item 1 Light sensor/ IR Receiver 2 Power indicator Description Used to detect the current level of visible light in the surrounding environment. Receive incoming remote - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 10
Switch the power supply on/off. 2 AC Power Input Connector Connect the power cord. 3 AC Power Output Connect the AC power output. Connector 4 HDMI Port Connect an HDMI equipment or an HDMI-DVI adapter cable to devices such as a DVD player or set-top box. v HDMI Supports High Definition - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 11
to DVI signal cable HDMI signal cable AUDIO IN VCR/DVD/Set-top Box Note: Dolby Digital is not supported. VCR/DVD/Set-top Box PC Connection Check that the computer, display, and the peripherals are turned off. Then, connect the signal input cable. A. Connecting with an HDMI Signal Input Cable - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 12
to External Devices B. Connecting with a DVI Signal Input Cable DVI IN Rear side of the display C. Connecting with a D-sub(VGA) Signal Input Cable RGB IN PC Rear side of the display MAC Power Connection Macintosh Adapter Use only the standard Macintosh adapter. Do not use other adapter type - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 13
display supports a VESA FDMI compliant mounting interface. These mounts are purchased separately. Refer to the instructions included with the wall mount for more info. v The handles are designed for carrying. Model Name PS-420W PS LEFT AUTO/OK POWER Handle PS-420W (42") SWITCH POWER AC 100-240~, - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 14
INPUT MENU DOWN UP RIGHT LEFT AUTO/OK POWER SWITCH 1 23 4 5 67 No. Item 1 Power switch 2 Input 3 Menu 4 Down/Up 5 Right/Left 6 Auto/OK 7 Power Description Turn the display on/off. Switch the input source. Display/hide the OSD (on-screen display) menu or return to the previous menu. Select - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 15
CONTRAST SHARPNESS BACKLIGHT COLOR TEMPERATURE USER 50 51 1 55 Icon Menu PICTURE SOUND SETUP Description Adjust and refine the picture displayed on your display based on ambient room light and personal preferences. Adjust the audio settings. Adjust the general settings such as OSD language - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 16
DVI Source: OK For VGA Source: AUTO Icon Item Power Description Turn on/off the display set. AUTO OK Left Right Up Down Menu Input Perform the selected item. • Move the focus vertically. • Change the selected item. • Display user menu. • Return to last form. • Exit user menu. Switch input sources - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 17
Display (OSD) Settings OK OK OK OK OK OK MENU MENU Display (*operation using the remote control) 1 Press the MENU button to display the OSD menu. 2 Use the p/q button to select the the Screen Automatically When the display is connected to the computer using the VGA cable, press - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 18
OSD Menus Adjusting Screen Color PICTURE PICTURE MODE BRIGHTNESS CONTRAST SHARPNESS BACKLIGHT COLOR TEMPERATURE MILD 50 50 1 55 PICTURE MODE Select a preset view option optimized for different viewing conditions. • DYNAMIC: This mode is normally used in department store, Backlight and - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 19
OSD Menus Adjusting Screen Color PICTURE COLOR TEMPERATURE COLORTEMP. MODE RED GREEN BLUE MEDIUM 128 122 115 COLOR TEMPERATURE Adjust color settings. • COOL: Select this option to adjust color setting to slightly purplish white. • MEDIUM: Select this option to adjust color setting to slightly - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 20
: Minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. • PHASE: Adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. Reset all PICTURE settings to the factory - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 21
OSD Menus Adjusting Sound Settings SOUND BALANCE AVC VOLUME SOUND RESET 0 OFF 50 BALANCE AVC VOLUME SOUND RESET Use this function to balance sound from the left and right speakers. If this Auto Volume Control (AVC) feature is enabled, the system will automatically adjust the uneven sound - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 22
. - The white and black screens flash alternately every second. - Disable this function when the image-sticking is disappeared. POWER Enable or disable the power indicator on the front of the display INDICATOR when the display is turned on. DPMS Set the power saving mode to on/off. 21 - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 23
Selecting the Options ABC FAIL OVER If this Auto Brightness Control (ABC) feature is enabled, the system will automatically adjust the display brightness signals based on ambient room light. Automatically detect the input connection and set its selection priority. SETUP AUTO DETECT ON USER - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 24
INFORMATION SET ID F / W VERSION SUB VERSION INPUT RESOLUTION 1 2.01 7 1280x1024 60Hz Set ID F/W Version Sub Version Input Resolution Display the assigned ID. Display the firmware version. Display sub firmware version. Show the information about resolution of the image which is currently being - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 25
Troubleshooting No image is displayed l Is the power cord connected? • See if the power cord is properly connected to the outlet. l Is the power indicator light on? • See if the power switch is turned on. l Power is on, power indicator • Adjust brightness and contrast again. is blue but the - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 26
characteristics of the LCD Panel. This is not a malfunction of the LCD. If any of above instructions does not work, follow the instructions: [1] Press MENU > SETUP > Factory Reset. [2] Remove the AC power cord and wait for 10 seconds. [3] Connect the AC power cord and turn on the display. 25 - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 27
prior notice for product improvement. LCD Panel Power Display Pixels Active Screen Size (diagonal) Pixel Pitch 1920 (H) x 1080 (V) [PS-420W]: 42.02 inches (1067.31mm) [PS-470W]: 46.96 inches (1192.87mm) [PS-420W]: 0.4845 (H) x 0.4845(V) (mm) [PS-470W]: 0.5415(H) x 0.5415 (V) (mm) Rated Voltage - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 28
.175 40 65 108 146.25 148.5 Remark VGA VESA VESA VESA VESA CEA HDMI - Preset Mode Mode No. 1 2 3 4 5 Resolution 480p 576p 720p 1080i 1080p Power Indicator Mode On Mode Sleep Mode Off Mode Device Blue Amber - 27 - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 29
RS-232C protocol is used for communication between the PC and display. You can turn the display on/off or adjust the OSD menu from your PC. Bit a Flow Control: None a Communication Code: Hex Code a Use a DB 9 Pin Cable 28 Display 3 Display 4 Pin No. 1 DCD 2 RxD 3 TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 30
). Connecting the cable Connect the HDMI cable as shown in the illustration. HDMI HDMI IN Display *Not support HDMI splitter or Daisy Chain connection, only support PC-Display 1:1 control. HDMI CEC statement Term Description One Touch Play Turning on the HDMI source device cause the connected - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 31
RS-232C Protocol Normal Function a Protocol (data format). Header (5 bytes) Payload (4 bytes) command Prefix code Prefix code Set #0 #1 ID Set Power 0xCC 0x33 Ack Set Power Set Input Source 0xCC 0xCC 0x55 0x33 Ack Input Source Read Input Source Ack Read Input Source 0xCC 0xCC 0xCC - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 32
HDMI, Dsub, DVI 3 : DVI, HDMI, Dsub 4 : DVI, Dsub, HDMI 5 : Dsub, HDMI, DVI 6 : Dsub, DVI, HDMI 0 4 0x14 0x08 : reserved reserved POWER (0x00) (0x00) 0x43 : MENU 0x0B : INPUT 0x40 : UP 0x41 : DOWN 0x07 : LEFT 0x06 : RIGHT 0 4 0x14 0xE0 : OK reserved reserved 0xE1 : NG - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 33
0xA2 1 4 0xA2 1 4 0xA3 1 4 0xA3 1 4 0xA4 1 4 0xA4 data #0 data #1 data #2 0xE0 : OK 0 : Normal reserved 0xE1 : NG (power on (0xFF) and signal exist) 1 : No Signal (power on) 2 : Turn off by remote controller 3 : Turn off by local key 4 : Turn off by RS-232C function - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 34
RS-232C Controlling the Multiple Product Header (5 bytes) Payload (4 bytes) command Prefix code Prefix code Set #0 #1 ID Payload Type # of payload bytes Command Set CEC 0xCC 0x33 0 4 0xA5 Ack Set CEC Read CEC 0xCC 0xCC 0x55 0x33 0 4 0xA5 1 4 0xA6 Ack Read CEC 0xCC 0x55 1 - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 35
RS-232C Controlling the Multiple Product MENU function (PICTURE) a Protocol (data format). Header (5 bytes) Payload (4 bytes) Checksum (1byte) command Prefix code Prefix code #0 #1 Set ID Payload Type # of payload bytes Command data #0 data #1 data #2 CS #0 Set Picture 0xCC 0x33 0 - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 36
RS-232C Controlling the Multiple Product command Prefix code #0 Ack Set 0xCC Color Temp Mode Read Color 0xCC Temp Mode Ack Read Color Temp Mode 0xCC Set Color Temp Red Ack Set Color Temp Red Read Color Temp Red Ack Read Color Temp Red Set Color Temp Green Ack Set Color Temp Green Read - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 37
RS-232C Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code #0 #1 Set ID Payload Type Ack Set 0xCC 0x55 0 VGA Adjust Auto Mode Set VGA 0xCC 0x33 0 Adjust H Position Ack Set 0xCC 0x55 0 VGA adjust H Position Read VGA 0xCC 0x33 1 Adjust H - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 38
RS-232C Controlling the Multiple Product MENU function (SOUND) a Protocol (data format). Header (5 bytes) command Set Balance Prefix code Prefix code Set #0 #1 ID 0xCC 0x33 Payload Type 0 Ack Set 0xCC 0x55 0 Balance Read 0xCC 0x33 1 Balance Ack Read 0xCC 0x55 1 Balance Set - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 39
RS-232C Controlling the Multiple Product MENU function (SETUP) a Protocol (data format). Header (5 bytes) Payload (4 bytes) command Prefix code Prefix code #0 #1 Set ID Payload Type # of payload bytes Command data #0 data #1 data #2 Set OSD 0xCC 0x33 0 4 0x70 0 : English reserved - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 40
) Safe Read 0xCC 0x33 1 4 0x75 reserved reserved Screen (0x00) (0x00) Safe Ack Read Screen Safe 0xCC 0x55 1 4 0x75 0xE0 : OK 0 : Off 0xE1 : NG 1 : On Set Power 0xCC 0x33 0 4 0x76 0 : Off reserved Indicator 1 : On (0x00) Ack Set 0xCC 0x55 0 4 0x76 0xE0 : OK reserved - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 41
Payload RS232C CheckSum Header (5 bytes) command Prefix code Prefix code #0 #1 Set ID Payload Type # of payload bytes Command Set Power 0xCC 0x33 0 4 0x10 Payload (4 bytes) data #0 0 : 0ff 1 : On data #1 reserved (0x00) Checksum (1byte) data #2 CS #0 reserved Header XOR (0x00 - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 42
HDMI CEC HDMI Consumer Electronics Control HDMI CEC Protocol Normal Function a Vendor Specific Data. OPCODE command Set Power Vendor Command With ID 0xA0 Ack Set Power 0xA0 Set Input Source 0xA0 Ack Input Source Read Input Source Ack Read Input Source 0xA0 0xA0 0xA0 Set Screen Mute Ack - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 43
: HDMI, Dsub, DVI 3 : DVI, HDMI, Dsub 4 : DVI, Dsub, HDMI 5 : Dsub, HDMI, DVI 6 : Dsub, DVI, HDMI 0 0x14 0x08 : reserved Header XOR POWER (0x00) Payload 0x43 : MENU 0x0B : INPUT 0x40 : UP 0x41 : DOWN 0x07 : LEFT 0x06 : RIGHT 4 0x14 0xE0 : OK reserved Header XOR 0xE1 : NG - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 44
HDMI CEC HDMI Consumer Electronics Control OPCODE command Set DCR Ack Set DCR Vendor Command With ID 0xA0 0xA0 Read DCR Ack Read DCR Read Sub Version Ack Read Sub Version Read Input Resolution Ack 1 Read Input Resolution Ack 2 Read Input Resolution Read Lamp on time Ack 1 Read Lamp on time Set - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 45
HDMI CEC HDMI Consumer Electronics Control MENU function (PICTURE) a Vendor Specific Data. OPCODE command Set Picture Mode Vendor Command With ID 0xA0 Ack Set Picture Mode Read Picture Mode Ack Read Picture Mode 0xA0 0xA0 0xA0 Set Brightness Ack Set Brightness Read Brightness Ack Read - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 46
HDMI CEC HDMI Consumer Electronics Control OPCODE command Set Color Temp Mode Vendor Command With ID 0xA0 Ack Set Color Temp Mode Read Color Temp Mode Ack Read Color Temp Mode 0xA0 0xA0 0xA0 Set Color Temp Red Ack Set Color Temp Red Read Color Temp Red Ack Read Color Temp Red Set Color Temp - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 47
HDMI CEC HDMI Consumer Electronics Control OPCODE command Read VGA Adjust H Position Ack Read VGA Adjust H Position Set VGA Adjust V Position Ack Set VGA Adjust V Position Read VGA Adjust V Position Ack Read VGA Adjust V Position Set VGA Adjust Clock Ack Set VGA Adjust Clock Read VGA Adjust Clock - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 48
HDMI CEC HDMI Consumer Electronics Control MENU function (SOUND) a Vendor Specific Data. command Set Balance OPCODE Vendor Command With ID 0xA0 Ack Set Balance Read Balance Ack Read Balance 0xA0 0xA0 0xA0 Set AVC Ack Set AVC Read AVC Ack Read AVC Set Volume Ack Set Volume Read Volume Ack Read - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 49
HDMI CEC HDMI Consumer Electronics Control MENU function (SETUP) a Vendor Specific Data. command Set OSD Language OPCODE Vendor Command With ID 0xA0 Ack Set OSD Language Read OSD Language Ack Read OSD Language 0xA0 0xA0 0xA0 Set OSD Rotation 0xA0 Ack Set OSD Rotation Read OSD Rotation Ack - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 50
Read Key Lock 0xA0 0xA0 0xA0 Set Screen Safe Ack Set Screen Safe Read Screen Safe Ack Read Screen Safe Set Power Indicator Ack Set Power Indicator Read Power Indicator Ack Read Power Indicator Set DPMS Ack Set DPMS Read DPMS Ack Read DPMS Set ABC Ack Set ABC Read ABC Ack Read ABC - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 51
0x91 reserved reserved Header XOR (0x00) (0x00) Payload 5 0x91 F/WLeft part F/WRight Header XOR part Payload HDMI CEC CheckSum command Set Power OPCODE Vendor Command With ID 0xA0 Vendor Specific Data VENDOR ID Header (2 bytes) Payload (fixed bytes : 3 bytes) VENDOR ID Set (3bytes - JVC PS-470W | PS-420W / PS-470W 42-in/47-in digital signage monitors operation - Page 52
product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the
Digital Signage LCD Display
MODELS:
PS-420W
PS-470W
OWNER’S MANUAL
Signage LCD
S
Signage LCD
S
Signage LCD
S
Signage LCD
S
D
S