JVC PS-840UD Owners Manual

JVC PS-840UD Manual

Get JVC PS-840UD PDF manuals and user guides View all JVC PS-840UD manuals
Add to My Manuals
Save this manual to your list of manuals

JVC PS-840UD manual content summary:

  • JVC PS-840UD | Owners Manual - Page 1
    OWNER'S MANUAL 4K Ultra HD LCD Display MODELS: PS-840UD
  • JVC PS-840UD | Owners Manual - Page 2
    Important Precautions Please read these safety precautions carefully before using the display. Warning Failure to follow those warnings may result in death, serious injury or damage to the display or other property. Electrical Power Related Precautions Warning n Use only the power cord supplied
  • JVC PS-840UD | Owners Manual - Page 3
    the display, unplug the power cord and contact Customer Service. - If you continue to use without taking proper display. - It can cause injury to humans, problems to the display, and damage the display. n flat and stable surface that is large enough to support the display. - If the display is dropped
  • JVC PS-840UD | Owners Manual - Page 4
    display yourself. - Fire or electric shock can occur. - Contact Customer Service for repair. n When cleaning the display, unplug the power cord and . Make sure to use a screen saver on the display. Burn-in and related problems are not covered by the warranty on this display. n Spray water onto a soft
  • JVC PS-840UD | Owners Manual - Page 5
    Important Precautions On Disposal (Only, Hg lamp used Display) n The fluorescent lamp used in this display contains a small amount of mercury. n Do not dispose of this display with general household waste. n Disposal of this display must be carried out in accordance to the regulations of your local
  • JVC PS-840UD | Owners Manual - Page 6
    the display. v The accessories included may differ from the images shown below. Remote Control & Batteries (AAA × 2) Power Cord *Power Cord for EU (Optional) Quick Start Guide Stand Stand Screws (6 pieces) CD-ROM (User's Manual) 5
  • JVC PS-840UD | Owners Manual - Page 7
    Name and Function of the Parts * The image shown in the user's guide could be different from the actual image. Front View 12 No. Item 1 Power indicator 2 IR Receiver Description Indicate power on or sleep mode status. - Power
  • JVC PS-840UD | Owners Manual - Page 8
    10 12 3 4 56 7 89 No. Item 1 AC Power Input Connector 2 AC Switch Description Connect the power cord. Switch the power supply on/off. 3 RS-232C Serial Ports Connect several displays with serial port. 4 Ethernet Port Connect to a local area network (LAN) using an Ethernet cable. 5 RGB
  • JVC PS-840UD | Owners Manual - Page 9
    an audio amplifier. Connect an HDMI equipment or an HDMI-DVI adapter cable to devices such as a DVD player or set-top box. v HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. 11 USB Ports 12 HDMI
  • JVC PS-840UD | Owners Manual - Page 10
    Using the Remote Control Name of the Remote Control Buttons OK • Enter the submenu. • Confirm the selection. Multimedia Enter the multimedia mode. Input Switch the input source. Info Display the input information. Left • Decrease the values. • Change the options. Back Return to the previous menu/
  • JVC PS-840UD | Owners Manual - Page 11
    Stand Installation Installing the Stand 1. Place the display with the screen side down on a flat and cushioned surface. Then, attach the stand as shown in the illustration. 2. Secure the stand with the six included screws. Please fasten with a screwdriver. Note • If you do not fasten the screws, the
  • JVC PS-840UD | Owners Manual - Page 12
    Stand Installation Removing the Stand 1. Place the display with the screen side down on a flat and cushioned surface. Then, remove the screws. 2. Detach the stand from the display. 11
  • JVC PS-840UD | Owners Manual - Page 13
    Mounting on a Wall VESA FDMI Wall Mounting This display supports a VESA FDMI compliant mounting interface. These mounts are purchased separately. Refer to the instructions included with the wall mount for more information. v The handles are designed for carrying. VESA-compatible wall bracket (WxH
  • JVC PS-840UD | Owners Manual - Page 14
    , Resolution & Picture Mode HDMI Connection, 3840 x 2160@30Hz, dynamic HDMI Connection (480p, 576p, 720p, 1080i, 1080p, UHD@24Hz/30Hz) HDMI supports ultra high definition (UHD) input, high definition input, and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to
  • JVC PS-840UD | Owners Manual - Page 15
    Connecting to External Devices HDMI-UHD60 Connection (3840 x 2160 @60Hz) Four HDMI ports form a UHD 60Hz. Each connection transmits 1080P @60Hz. 1 2 Display 3 4 UHD60 HDMI signal cable HDMI signal cable HDMI signal cable HDMI signal cable 1 2 Computer/ Camcorder/ Multimedia 3 player 4 PC
  • JVC PS-840UD | Owners Manual - Page 16
    Connecting to External Devices Audio Out Connection AUDIO OUT Display Audio cable Speaker DPTICAL Display Optical audio cable Component Connection Display Y/V Pb/Cb Pr/Cr L AUDIO R COMPOSITE [GOOD] Audio amplifier VCR/DVD/Set-top Box Component AV cable Composite (Video) Connection
  • JVC PS-840UD | Owners Manual - Page 17
    Connecting to External Devices USB Connection USB 1 2 Display USB Flash Drive Ethernet Connection ETHERNET Display Ethernet (RJ-45) cable Network Power Connection Rear side of the display INPUT MEN U VOL VOL Power outlet Power cord 16
  • JVC PS-840UD | Owners Manual - Page 18
    of the display OPS Module INPUT MENU VOL VOL Note • Refer to the instructions included with the OPS Module for more information. • Video interface supported is DVI and maximum resolution is 1080P • DisplayPort is not supported • Maximum power provide for OPS is 80W Digital Signage Open Pluggable
  • JVC PS-840UD | Owners Manual - Page 19
    OSD Menus Screen Adjustment Options (using the Control Panel) INPUT MENU 5 VOL VOL INPUT 6 MENU 7 2 VOL 1 4 VOL 3 No. Item 1 Up 2 Down 3 Volume Up 4 Volume Down 5 Power 6 Input 7 Menu Description Select menu item (move up). Select menu item (move down). - Increase the volume level.
  • JVC PS-840UD | Owners Manual - Page 20
    OSD Menus Menu Options Menu Input Picture Audio Setup Ethernet Wide Sleep Timer Description Select the input source. Adjust and refine the picture displayed on your display based on ambient room light and personal preferences. Adjust the audio settings. Adjust the general settings such as CEI
  • JVC PS-840UD | Owners Manual - Page 21
    OSD Menus Adjusting On-Screen Display (OSD) Settings Display OSD menu Select a main menu Enter the selected menu Select a menu item Enter the submenu Adjust the setting Confirm the setting Return to previous menu (*operation using the remote control) 1 Press the MENU button to display the
  • JVC PS-840UD | Owners Manual - Page 22
    OSD Menus Input Menu Select the proper input source. Note • You can also access the Input menu by pressing the INPUT button on the remote control. • The available menu options varies depending on the input source. • If the menu items are appears in gray, this indicates that those functions are not
  • JVC PS-840UD | Owners Manual - Page 23
    OSD Menus Picture Menu Menu Option Description Picture Mode Select a preset view option optimized for different viewing conditions. • Custom: User can use the user-defined settings as they wish. • Cinema: This mode is normally used in movie. Soft image can be seen in this mode. The picture is
  • JVC PS-840UD | Owners Manual - Page 24
    OSD Menus Picture Menu (continue) Menu Option Description Picture Mode • Nature: This mode shows normal and natural image. • Sports: This mode uses high contrast display for clear-cut images ideal for viewing sports events. • Dynamic: This mode is normally used in department store, Backlight
  • JVC PS-840UD | Owners Manual - Page 25
    OSD Menus Picture Menu (continue) Menu Option Description Size & Position Adjust the display settings. • Auto Adjust: Synchronize the display automatically. • Horiz. Position: Move the screen position horizontally. • Vertical Position: Move the screen position vertically. • Horizontal Size: Set
  • JVC PS-840UD | Owners Manual - Page 26
    OSD Menus Picture Menu (continue) Menu Option Description Color Adjust the color settings. Temperature • Color Temperature: Select from the predetermined color temperatures. • Red Gain / Green Gain / Blue Gain: Adjust the red / green / blue gain settings to your preference. • Red Offset /
  • JVC PS-840UD | Owners Manual - Page 27
    OSD Menus Picture Menu (continue) Menu Option Description Advanced Picture Set advanced Picture settings. Reset Picture Settings • Dynamic Contrast: Adjust the brightness of the display to maximize the picture quality. • Local Dimming: Reduce the leakage and produce a darker picture. • MEMC:
  • JVC PS-840UD | Owners Manual - Page 28
    OSD Menus Audio Menu Menu Option Description XinemaSound™ Enable/Disable the multi-dimensional surrounding sound 3D function. XinemaSound™ Leveler Enable/Disable the smooth and steady volume level function. Bass Adjust the bass level to your preference. Treble Adjust the treble level to
  • JVC PS-840UD | Owners Manual - Page 29
    OSD Menus Audio Menu (continue) Menu Option Audio Only Digital Audio Out Analog Audio Out Equalizer Settings Description Output audio from the TV speakers but turn off the TV display. Select the type of digital audio output to an external audio system. Select the analog audio mode. Customize the
  • JVC PS-840UD | Owners Manual - Page 30
    OSD Menus Setup Menu Menu Option CEI Settings Description Configure CEI settings. • CEI Function: Enable/Disable CEI function. • Device Search: Search for CEI devices. Note "Device Search" option is only available if CEI function is enabled. Menu Language Select the on-screen menu language.
  • JVC PS-840UD | Owners Manual - Page 31
    Command Input via RS232 or OPS. Set ID Assign a unique Set ID NO (name assignment) to each display when several displays are connected (via RS-232C) for display. System Information Enter the ID number and select Set to confirm the setting. Display the system information of the display. Select
  • JVC PS-840UD | Owners Manual - Page 32
    OSD Menus Setup Menu (continue) Menu Option Reset All Settings Description Return the display parameters on all menus to the factory default settings. Select OK to reset all settings. 31
  • JVC PS-840UD | Owners Manual - Page 33
    OSD Menus Ethernet Menu Menu Option Manual Setup Description Configure the network settings. • Type: User can use the user-defined settings as they wish. • IP Address / Subnet Mask / Def. Gateway / Pref. DNS /
  • JVC PS-840UD | Owners Manual - Page 34
    OSD Menus Wide Menu Select how the picture displays on the screen. As you select an option, you will see the screen adjusting to the different size. Note • The available menu options varies depending on the input source. • "Wide" menu is not available if the input source is 4k2k. • The option is
  • JVC PS-840UD | Owners Manual - Page 35
    OSD Menus Sleep Timer Set the timer to turn the display off at the preset time. Note You can also access the Sleep Timer menu by pressing the SLEEP button on the remote control. 34
  • JVC PS-840UD | Owners Manual - Page 36
    to music, or watch videos stored on a USB storage device. Multimedia support format Container ASF Extensions .asf .wmv .wma Audio/Video Video Codec VC MPEG-1 Layer III (MP3) AC-3 AAC MPEG-2 .vob PS (Program Stream), VOB, SVCD Video Audio MPEG-1 MPEG-2 AC-3 MPEG-1 Layer I, II DVD-LPCM 35
  • JVC PS-840UD | Owners Manual - Page 37
    16 bit PCM JPEG .jpeg .jpg JPEG Note • All still pictures are scaled to 1920 x 1080 then upscaled to 3840 x 2160 for display. • Video decoding supports up to FHD 30P. Basic Operation 1. Turn on the display. 2. Plug a USB device to the USB port on the display. 3. Press the MULTIMEDIA button on
  • JVC PS-840UD | Owners Manual - Page 38
    Multimedia Mode Playback Music 1. Select Audio and press the OK button to enter the main Music content browser. 2. In the main Music content browser, use the p/q button to select a song. 3. Press the OK button to play, and an automatic playback begins from the selected song. n Press the icon to
  • JVC PS-840UD | Owners Manual - Page 39
    Multimedia Mode Watching Videos 1. Select Video and press the OK button to enter the main Video content browser. 2. In the main Video content browser, use the p/q button to select a video. 3. Press the OK button to begin the video playback. n Press the icon to pause the selected video playback.
  • JVC PS-840UD | Owners Manual - Page 40
    Multimedia Mode Viewing Photos 1. Select Photo and press the OK button to enter the main Photo content browser. 2. In the main Photo content browser, use the p/q/t/u buttton to select a photo. 3. Press the OK button to view in full screen. 4. To begin a slide show, select Start Slideshow and press
  • JVC PS-840UD | Owners Manual - Page 41
    Changing Display Mode Set Aspect Ratio 1. Turn on the display. 2. Press the WIDE button on the remote control. The Aspect Ratio menu appears on the screen. 3. Use the p/q button to select the aspect ratio of the display and press the OK button to confirm. Normal Stretch Wide Panoramic Zoom
  • JVC PS-840UD | Owners Manual - Page 42
    Troubleshooting No image is displayed l Is the power cord connected? • See if the power cord is properly connected to the outlet. l Is the power indicator light
  • JVC PS-840UD | Owners Manual - Page 43
    Troubleshooting After-image appears on the screen l After-image appears when the previous image the LCD Panel. This is not a malfunction of the LCD. If any of above instructions does not work, follow the instructions: [1] Press MENU. Select Setup > Reset All Settings. [2] Enter the password. [3]
  • JVC PS-840UD | Owners Manual - Page 44
    3840 x 2160 @50/60Hz Component: 1920 x 1080 I @50Hz Composite: 480i (NTSC) Supported Color Format 4K2K@30Hz / 4K2K@25Hz / 4K2K@24Hz: Up to RGB 4:4:4: 8 bit 12 bit Input Connector HDMI, HDMI UHD60, RGB (VGA), RS-232C, RJ-45, Component/ Composite Environmental Operational Condition Temperature:
  • JVC PS-840UD | Owners Manual - Page 45
    Specifications PC Mode (RGB) - Preset Mode Mode No. 1 2 3 4 5 6 7 8 9 10 11 12 Resolution 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1920 x 1080 Refresh rate 70Hz 60Hz 75Hz 60Hz 72Hz 75Hz 60Hz 70Hz 75Hz 60Hz 75Hz 60Hz
  • JVC PS-840UD | Owners Manual - Page 46
    Specifications Mode No. 15 16 17 18 19 Mode No. 1 2 Single HDMI Resolution 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 UHD60 (4x HDMI) Resolution 3840 x 2160 3840 x 2160 Refresh rate 23.98Hz 24Hz 25Hz 29.97Hz 30Hz Refresh rate 50Hz 60Hz Component Mode - Preset Mode Mode No. 1 2
  • JVC PS-840UD | Owners Manual - Page 47
    to a single PC. You can control several displays at a time by connecting them to a single PC. Connecting the cable Connect the RS-232C cable as shown in the illustration. * The RS-232C protocol is used for communication between the PC and display. You can turn the display on/off or adjust the
  • JVC PS-840UD | Owners Manual - Page 48
    of the display). Connecting the cable Connect the HDMI cable as shown in the illustration. HDMI HDMI Display *Not support HDMI splitter or Daisy Chain connection, only support PC-Display 1:1 control. HDMI CEI statement Term Description One Touch Play Turning on the HDMI source device cause
  • JVC PS-840UD | Owners Manual - Page 49
    -45 Controlling the Multiple Product RS-232C and RJ-45 Protocol command Set Power Ack Set Power Set Input Source Header (5 bytes) Prefix code Prefix code Set Payload #0 #1 ID Type 0xCC
  • JVC PS-840UD | Owners Manual - Page 50
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Set Remote 0xCC 0x33 0 Controller Key Ack
  • JVC PS-840UD | Owners Manual - Page 51
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Ack Set VGA 0xCC 0x55 0 Horz. Size
  • JVC PS-840UD | Owners Manual - Page 52
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Set 0xCC 0x33 0 Sharpness Ack Set 0xCC
  • JVC PS-840UD | Owners Manual - Page 53
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Ack Set Color 0xCC 0x55 0 Temp Green
  • JVC PS-840UD | Owners Manual - Page 54
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Ack Set VGA 0xCC 0x55 0 Adjust Phase
  • JVC PS-840UD | Owners Manual - Page 55
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Ack Read 0xCC 0x55 1 non-VGA Vert.
  • JVC PS-840UD | Owners Manual - Page 56
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Ack Set Color 0xCC 0x55 0 Temp Blue
  • JVC PS-840UD | Owners Manual - Page 57
    RS-232C RJ-45 Controlling the Multiple Product command Ack Read Digital NR Header (5 bytes) Prefix code Prefix code Set Payload #0 #1 ID Type 0xCC 0x55 1 Set
  • JVC PS-840UD | Owners Manual - Page 58
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Set 0xCC 0x33 0 XinemaSound Leveler Ack Set
  • JVC PS-840UD | Owners Manual - Page 59
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Ack Read 0xCC 0x55 1 Speakers Set Audio
  • JVC PS-840UD | Owners Manual - Page 60
    RS-232C RJ-45 Controlling the Multiple Product command Set OSD Language Header (5 bytes) Prefix code Prefix code Set Payload #0 #1 ID Type 0xCC 0x33 0 Ack Set
  • JVC PS-840UD | Owners Manual - Page 61
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Ack Read Input Resolution Prefix code Prefix code Set Payload #0 #1 ID Type 0xCC 0x55 1 Set
  • JVC PS-840UD | Owners Manual - Page 62
    RS-232C RJ-45 Controlling the Multiple Product Header (5 bytes) command Prefix code Prefix code Set Payload #0 #1 ID Type Ack Set Wide 0xCC 0x55 0 Mode Read
  • JVC PS-840UD | Owners Manual - Page 63
    Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary noise is normal when powering
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
4K Ultra HD LCD Display
MODELS:
PS-840UD
OWNER’S MANUAL
K
W
K
W
K
W
WNER
’
S MAN
U
AL
K
W