JVC SR-V10U SR-V10U Instruction manual (1MB, PDF) - Page 19
Basic, Recording - video cassette recorder
View all JVC SR-V10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Basic Recording Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. POWER PLAY ( 3 ) JOG dial POWER S VIDEO VIDEO (MONO)L-AUDIO-R REC LINK DIGITAL TBC/NR SP EP VCR A.DUB INSERT PLAY REW - FF + CH- /+ PUSH / TURN 24HR QUICK PROGRAM REC PAUSE STOP/EJECT 4 PAUSE ( 8 ) STOP/EJECT ( 7 / 0 ) TV/VCR 1 4 7 1 REW ( 1 ) 4 POWER 2 3 2 5 6 8 9 0 4 3 2 -b 2 -a 3 FF ( ¡ ) PAUSE ( 8 ) STOP ( 7 ) This VCR can check the tape condition during recording (and playback), and realizes the best possible pictures. 1 Load a cassette Make sure the record safety tab is intact. If not, set "REC SAFETY" to "OFF" ( ੬ pg. 37, 41). ● You can also record onto a cassette without a record safety tab by covering the hole with adhesive tape before inserting the cassette. EN 19 2 Select recording channel On the front panel: Push the JOG dial, then turn it to the left or right. On the Remote: a- Press CH + or -. or b- Press the Number keys. ● If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the front display panel, to view the program to be recorded. 3 Set tape speed Press SP/EP to set the recording speed. 4 Start recording On the front panel: Press REC ( ¶ ). On the Remote: While holding REC ( ¶ ), press PLAY ( 3 ). ● If "VIDEO CALIBRATION" is set to "ON" (default setting: ੬ pg. 37, 38), this VCR checks the tape condition for about seven seconds, then starts recording. This means that the first seven seconds of the program will not be recorded. If this is inconvenient for you, follow the steps below: 1 Press REC ( ¶ ) and PAUSE ( 8 ) to start Video Calibration. 2 Then press PLAY ( 3 ) to start recording after Video Calibration is complete. To pause recording Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ). ● Pressing REC ( ¶ ) on the front panel also resumes recording. To stop recording Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel. To rewind the tape (when it is not running) Press REW ( 1 ) (or turn the JOG dial on the front panel to the left). To fast-forward the tape (when it is not running) Press FF ( ¡ ) (or turn the JOG dial on the front panel to the right). To eject the tape Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running. ● You can also eject the cassette with the VCR turned off. To turn off the VCR Press POWER. It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.