JVC SR-V10U SR-V10U Instruction manual (1MB, PDF) - Page 20

20 EN Basic Recording Features BASIC PLAYBACK AND RECORDING (cont.) A Changing display information Press DISPLAY during recording or recording pause. Each time you press the button, the front display panel shows the time counter, tape remaining time, channel number and the clock time in sequence. Time Counter Tape Remaining Time POWER S VIDEO VIDEO (MONO)L-AUDIO-R REC LINK DIGITAL TBC/NR SP EP VCR STOP/EJECT ( 7 / 0 ) A.DUB INSERT PLAY REW - FF + CH- /+ PUSH / TURN 24HR QUICK PROGRAM REC PAUSE STOP/EJECT B Clock Time Channel No. ● To display the VCR status including the tape remaining time, the time counter and the clock time on the TV screen, see "Showing on-screen display" (੬ pg. 21). ● The approximate tape remaining time appears and the " " indicator lights on the front display panel. ● The tape remaining time is calculated based on the tape speed (SP or EP) being used. The indicated remaining time is only an estimate. To reset the time counter, press C. RESET on the Remote. The counter reading becomes "0:00:00". It is also reset when a tape is inserted. C -1 C. RESET A 1 2 3 2 4 5 6 7 8 9 0 4 1 B 3 STOP ( 7 ) D Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with adhesive tape, or set "REC SAFETY" to "OFF". (੬␣ pg. 37, 41) B Recording on one tape repeatedly - Repeat Recording You can record programs on one tape repeatedly. While recording, press and hold PLAY ( 3 ) and REC on the Remote or REC ( ¶ ) on the front panel for more than 5 seconds. The record indicator on the front display panel starts flashing slowly. To stop recording, press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel. To prohibit operations during Repeat Recording (Mode Lock) Press and hold OK on the Remote for more than 5 seconds. " " and " " light up on the front display panel (੬ pg. 60). The recording will be performed repeatedly without any interruption. To cancel Mode Lock, press and hold OK on the Remote again for more than 5 seconds. ● When OK is pressed to set Mode Lock, the on-screen display appears and the time counter will be recorded with your picture. If the time counter is not necessary, set "ON SCREEN (REC)" to "OFF" ( ੬ pg. 37, 39). Record safety tab Note: You can also record onto the cassette even when the tab is removed. (੬ pg. 41)