JVC SR-V10U SR-V10U Instruction manual (1MB, PDF) - Page 28
VCR Plus, Timer, Programing
View all JVC SR-V10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 EN VCR Plus+® Timer Programing Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. POWER DAILY CANCEL 1 2 3 3 4 2 4 5 6 7 8 9 WEEKLY 0 8 4 STOP +/- 4 2 7 1 6 3 3 4 7 4 TIMER RECORDING Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8␣ timer recording programs can be made using VCR Plus+ timer programing, Express timer programing (੬ pg. 32) or 24HR quick programing method (੬␣ pg.␣ 34) as far as a year in advance. The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR's timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.) 1 Load a cassette Make sure the record safety tab is intact. If not, set "REC SAFETY" to "OFF" ( ੬ pg. 37, 41). ● The VCR turns on, and the counter is reset, automatically. ● You can also record onto a cassette without a record safety tab by covering the hole with adhesive tape before inserting the cassette. 2 Access PlusCode No. screen Press PROG. on the Remote. PLUSCODE NO. ● The clock must be set to access the PlusCode No. screen. If you have not set the clock, the Main Menu PRESS NUMBER KEY (0-9) PRESS (+/-) TO SET EXPRESS PROGRAMMING PRESS (PROG.) TO END screen appears after an error message is displayed. Refer to page 8 for the Plug & Play setting or page 10 for the clock setting procedure. 3 Enter PlusCode number Press the appropriate Number keys to input PLUSCODE NO. the PlusCode number 123 printed in the TV listings for the TV broadcast you wish to record, then press OK. PRESS NUMBER KEY (0-9) THEN (OK) PRESS (PROG.) TO END Then; If the Guide Channel Set screen appears - go to step 4. If the VCR Plus+ Program screen appears - go to step 5. ● To make corrections, press CANCEL and input the correct PlusCode number.