JVC SR-V10U SR-V10U Instruction manual (1MB, PDF) - Page 40

40 EN OTHER USEFUL FUNCTIONS (cont.) Ⅵ 2ND AUDIO RECORD ON OFF * The default setting is bold in the table below. When this function is set to "ON"; ● If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks. The main audio is not recorded. ● If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and normal tracks. When this function is set to "OFF", the SAP audio cannot be recorded. Ⅵ AUDIO MONITOR HI-FI: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R: Sound on the right Hi-Fi channel is played back. NORM: Sound on the normal track is played back. MIX: Both sounds on the Hi-Fi track and normal track are mixed and played back. This VCR can record two sound tracks simultaneously (normal and HiFi) on a tape. You can select the sound track(s) to listen to while playing back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape containing two separate audio programs on the Hi-Fi tracks, you can choose either one by selecting either "HI-FI L" or "HI-FI R". NOTES: ● While playing back a monaural tape, sounds on the normal track will be heard regardless of this setting. ● If RF connection (੬ pg. 7) is used for viewing pictures on the TV, sound will be monaural even though you select "HI-FI". ● You can also use the A. MONITOR button on the Remote to select the desired monitor sound. (੬ pg. 17) Ⅵ S-VHS MODE ON OFF You can determine which recording mode - either S-VHS mode or VHS mode - is used for recording on S-VHS tapes. When this function is set to "ON", you can record on S-VHS tapes with S-VHS picture quality. When this function is set to "OFF", you can record on S-VHS tapes with VHS picture quality. Ⅵ FRONT AUX INPUT VIDEO S-VIDEO Ⅵ REAR AUX INPUT VIDEO S-VIDEO NOTES: • S-VHS mode allows you to make high quality video recordings with horizontal resolution of 400 lines, comparing with the 230 lines of resolution of conventional VHS recordings. To achieve the highest quality picture we recommended to record in S-VHS mode. (But remember that a conventional VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.) • S-VHS MODE setting does not affect recording on VHS tapes. Recording on VHS tapes is always performed in VHS mode except when using S-VHS ET mode (੬ pg. 41). You have to select which terminal - either VIDEO (composite) or S VIDEO (Y/C separate signals) - to use as the video input terminal on the front panel. Make sure to select the correct terminal; otherwise, you may fail in recording (editing) on this VCR. You have to select which terminal - either VIDEO (composite) or S VIDEO (Y/C separate signals) - to use as the video input terminal on the rear panel. Make sure to select the correct terminal; otherwise, you may fail in recording (editing) on this VCR. Refer to page 37 for setting procedures.