JVC TK-C2301WPRU Instruction Manual

JVC TK-C2301WPRU Manual

Get JVC TK-C2301WPRU PDF manuals and user guides View all JVC TK-C2301WPRU manuals
Add to My Manuals
Save this manual to your list of manuals

JVC TK-C2301WPRU manual content summary:

  • JVC TK-C2301WPRU | Instruction Manual - Page 1
    FIXED IR DOME CAMERA TK-C2301WPRU (For USA and Canada) TK-C2301WPRE (For Europe) INSTRUCTIONS For Customer Use of TK-C2301WPRU : Enter below the Serial No. which is located on the body. Retain this information for future reference. Model No. Serial No. TK-C2301WPRU LST1406-001A
  • JVC TK-C2301WPRU | Instruction Manual - Page 2
    with a cart or stand recommended by the manufacturer, or sold with the appliance. Wall or shelf mounting should follow the manufacturer's instructions, and should S3125A use a mounting kit approved by the manufacturer. An appliance and cart combination should be moved with care. Quick stops
  • JVC TK-C2301WPRU | Instruction Manual - Page 3
    will be abused by persons walking on it. 12. Follow all warnings and instructions marked on the appliance. 13. Do not overload wall outlets and extension cords as the appliance. 15. Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage
  • JVC TK-C2301WPRU | Instruction Manual - Page 4
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the appliance. c. If the appliance has been exposed to rain or water. d. If the appliance does not operate normally by following the operating instructions
  • JVC TK-C2301WPRU | Instruction Manual - Page 5
    electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. E-5
  • JVC TK-C2301WPRU | Instruction Manual - Page 6
    and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there radio/TV technician for help. CAUTION CHANGES OR MODIFICATIONS NOT APPROVED BY JVC KENWOOD Corporation COULD VOID USER'S AUTHORITY TO OPERATE THE EQUIPMENT. This
  • JVC TK-C2301WPRU | Instruction Manual - Page 7
    . Dear Customer This apparatusis in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany E-7
  • JVC TK-C2301WPRU | Instruction Manual - Page 8
    please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Penalties may you wish to dispose of this product, please visit our web page http://www.jvc.eu to obtain information about the take-back of the product. [Other Countries
  • JVC TK-C2301WPRU | Instruction Manual - Page 9
    installation should be made by a qualified service person and should conform to all local 70. v Any Mention in this manual of Alarm inputs have not been the camera unit. v JVC KENWOOD Corporation is not liable support the weight of this camera. If the location is not strong enough to support
  • JVC TK-C2301WPRU | Instruction Manual - Page 10
    the Auto White Balance 40 Menu Setting The Flow of Menu Screen 42 Menu Setting Procedure 44 BASIC MENU 45 ADVANCED MENU 47 Setting Examples Manual Adjustment of White Balance 55 Setting the Privacy Mask 56 Settings in Dark Locations 57 Others Specifications 60 E-10
  • JVC TK-C2301WPRU | Instruction Manual - Page 11
    ensure proper use of this product. The instructions in this manual are for TK-C2301WPRU and TKC2301WPRE. TK-C2301WPRE is not evaluated by UL. Features item. Contents of this manual v JVC KENWOOD Corporation holds the copyright to this manual. Any part or all of this manual may not be reproduced
  • JVC TK-C2301WPRU | Instruction Manual - Page 12
    Introduction Operating Precautions m Storage and Location of Use v Do not install the camera in the following places. - In a place with vapor or oil, for example in a kitchen. - When the ambient temperature rises above or falls below the acceptable range (from -10 f to 50 f) - In a place at which
  • JVC TK-C2301WPRU | Instruction Manual - Page 13
    Introduction m Copyright Protection v With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in principle for the duplication, modification, or transmission of copyrighted material. v
  • JVC TK-C2301WPRU | Instruction Manual - Page 14
    camera may be turned off. Make use of a voltage rating within ±10 % for the camera's power supply voltage. v This unit enlarges the rotation angle to support wide range set up. When the zoom of the lens is set to WIDE end and the tilt angle is set around ±80°, a part of
  • JVC TK-C2301WPRU | Instruction Manual - Page 15
    2 power supply only, Class 2 not wet and Class 3 wet wiring. E-type: Isolated power supply only v For inquiries on the heater, consult your nearby JVC dealer. H Alarm Cable (A page 18, 19, 25) I Hole for Connecting Cables, Conduit Hole (A page 31) J Base (A page 30) K Dome Cover Fastening Screw
  • JVC TK-C2301WPRU | Instruction Manual - Page 16
    Introduction Name of Parts (Continued) Camera (Interior) The dome cover and inner dome are removed. J SEE INSTRUCTION MANUAL K ON CRT BLC OFF 2 MONITOR LCD 3 TYPE NOT USED 4 L D/N AUTO 1 OFF DIPSW A F ADJ M B C N D O E F G F ADJ P Q MENU R H SET I MONITOR A Gear for Focus
  • JVC TK-C2301WPRU | Instruction Manual - Page 17
    Introduction G Power Supply Connector for Heater For connecting to the power supply connector of the heater. H Tilt Fastening Screw x 2 (A page 35) I [MONITOR] Terminal (RCA pin) (A page 34) J Lug Plate (A page 26) K Space for Inserting Silica Gel (A page 26) L Shooting Direction Mark (A page 35)
  • JVC TK-C2301WPRU | Instruction Manual - Page 18
    Setup About Connection Cables The maximum connection distance varies with the type of cable used. v Be sure to turn off the power of devices before connecting cables. To video signal cable To power supply cables To alarm cables . m Identification of cables Type Color Power Supply Cables Red
  • JVC TK-C2301WPRU | Instruction Manual - Page 19
    54). The default setting has been set to alarm input (IN:ALARM). m Alarm input terminal Connect the infrared sensor, door sensor, metal sensor, manual switch sensor and the like. v To prevent noise from entering the internal circuit, supply non-voltage setting signal to the alarm input signal. v Do
  • JVC TK-C2301WPRU | Instruction Manual - Page 20
    Setup About Connection Cables (Continued) DC 12 V or AC 24 V power supply cable Connect the power cord to the DC 12 V or the AC 24 V power supply. The unit is to be powered by a UL Listed Class 2 power supply only. (For USA and Canada) The AC 24 V and DC 12 V power supply shall conform to the
  • JVC TK-C2301WPRU | Instruction Manual - Page 21
    it is connected by mistake, the internal circuit may be damaged. Do not use the camera and make sure to send it to the nearest JVC dealer for inspection. v Do not connect DC 12 V and AC 24 V cables at the same time. v When connecting the DC 12 V cables, ensure that the
  • JVC TK-C2301WPRU | Instruction Manual - Page 22
    Setup Setting the Switches Before mounting the camera, set the function setting switches on the camera. To set the switches, use a fine-tipped screwdriver. DIP switch settings chart 1 D/N AUTO OFF 2 BLC OFF ON 3 MONITOR 4 TYPE LCD CRT WIDE-D OFF ON . Function selection switches 1 [D/N AUTO/
  • JVC TK-C2301WPRU | Instruction Manual - Page 23
    Mounting the Camera Installation Selecting a mounting method v Mounting the camera directly to the ceiling or on the wall (Refer to below) v Mounting the Camera Using the Conduit Hole at the Bottom of the Base (A page 30) v Mounting the Camera Using the Conduit Hole at the Side of the Base (A page
  • JVC TK-C2301WPRU | Instruction Manual - Page 24
    Installation Mounting the Camera (Continued) m Mounting the Camera Unit 1 Make a hole (Φ30 mm) in the ceiling using the template provided 2 Mount the fall prevention wire for connecting the camera unit to the ceiling The fall prevention wire is not provided. Prepare a wire, taking into due
  • JVC TK-C2301WPRU | Instruction Manual - Page 25
    Installation m Connecting the cable For safety reasons, turn on the power only after all the connection is complete. The status indicator lights up when the camera is turned on. 1 Connect the coaxial cable (A page 18) Lower the protection cover and connect the connectors. Upon connecting, restore
  • JVC TK-C2301WPRU | Instruction Manual - Page 26
    Installation Mounting the Camera (Continued) m Process after connection Fill the conduit hole and mounting holes with sealing agent and insert the silica gel. 1 Fill the conduit hole and the screw mounted holes (2 locations) with sealing agent (GE silicon) Note Seal the holes completely. Failure to
  • JVC TK-C2301WPRU | Instruction Manual - Page 27
    ) m Mounting the Dome Cover Attach the dome cover back when all settings are finished. 1 Mount the inner dome Mount the inner dome in a way that supports the tilt direction of the lens. Insert the inner depression of the inner dome into the protruding parts beside the fastening screw. Push it in
  • JVC TK-C2301WPRU | Instruction Manual - Page 28
    Installation Mounting the Camera (Continued) Memo v To use the camera with more than 45° tilt, tilt the inner dome and mount/dismount the inner dome by avoid contacting the light shielding cushion. .. Light shielding cushion Inner dome v To use the camera while rotating with more than 45° tilt,
  • JVC TK-C2301WPRU | Instruction Manual - Page 29
    Installation 2 Mount the dome cover ① Clean the dust and dirt on the dome cover. ② Align the position marks (3 locations) on the camera unit and dome cover, followed by pressing in directly to mount the cover. ③ Tighten the dome cover fastening screw. Position alignment mark (x3) Dome cover Dome
  • JVC TK-C2301WPRU | Instruction Manual - Page 30
    Installation Mounting the Camera (Continued) Mounting the Camera Using the Conduit Hole at the Bottom of the Base Conduit hole: G3/4-14 UNC (TK-C2301WPRU), M25 (TK-C2301WPRE) 1 Remove the dome cover and inner dome (A page 23) 2 Remove the camera unit from the base and mount the fall prevention wire
  • JVC TK-C2301WPRU | Instruction Manual - Page 31
    Installation 4 Mount the base to the pipe Turn and screw the base unit to the pipe in the clockwise direction. Note When screwing the pipe, do not screw beyond 12 mm. Doing so can damage the camera interior. 5 Secure the base unit to the ceiling Use the M4 screw (x2) to secure the base firmly
  • JVC TK-C2301WPRU | Instruction Manual - Page 32
    to the ceiling, use the conduit hole at the side of the base to mount the camera to the pipe. Conduit hole: G3/4-14 UNC (TK-C2301WPRU), M25 (TK-C2301WPRE) 1 Remove the dome cover and inner dome (A page 23) 2 Remove the camera unit from the base and mount the fall prevention wire to
  • JVC TK-C2301WPRU | Instruction Manual - Page 33
    Installation Mounting the Camera using the Electrical Box 1 Remove the dome cover and inner dome (A page 23) 2 Mount the camera unit to the electrical box Mount the camera unit to the electrical box using the mounting hole (2 locations) with the M4 screw (2 pieces). Memo The screws are not provided.
  • JVC TK-C2301WPRU | Instruction Manual - Page 34
    Adjustment Adjusting Image After mounting the camera, adjust the images while looking at the actual image. Discharge the static electricity from your body by touching the metallic part of the monitor terminal before handling the camera as static electricity may cause the camera to malfunction. 1
  • JVC TK-C2301WPRU | Instruction Manual - Page 35
    Adjustment 3 Adjust the shooting direction of the camera Adjust the camera for pan, tilt and rotation, and face the camera towards the subject. Pan: ±175 ° Rotation: ±100 ° F ADJ 1 MENU Tilt fastening screw Tilt: ±80 ° Shooting direction mark Pan center mark Rotation center mark Rotation knob (
  • JVC TK-C2301WPRU | Instruction Manual - Page 36
    Adjustment Adjusting Image (Continued) Note v Moving the camera beyond its adjustable range may deteriorate the performance of this camera. v As this camera has a wide tilt/rotation range, a part of this camera may appear on the screen depending on the field angle and direction. v Do not hold the
  • JVC TK-C2301WPRU | Instruction Manual - Page 37
    Adjustment 5 Fine adjust the focus ① Press and hold the [J] button. v Focus adjust mode will be activated and "FOCUS ADJUST MODE" is displayed on the monitor screen. v The contours are emphasized as the iris opens and the depth of field becomes shallow. v After adjustment, press [ K, H, I] / [SET
  • JVC TK-C2301WPRU | Instruction Manual - Page 38
    Adjustment Adjusting Image (Continued) Note v When rotating the camera with more than 65° tilt, IR LED may be hidden by the camera, making the irradiation distance shorter. v When the image size is set to wide end, part of the camera unit may be recorded at the most tilted point. At this point,
  • JVC TK-C2301WPRU | Instruction Manual - Page 39
    Adjustment Checking after Operation A light shielding cushion is attached to the lens so that the lens is not exposed to infrared light directly. After adjustment, when attaching the dome cover and the lens cover, make sure that the light shielding cushion is attached correctly with the taper (
  • JVC TK-C2301WPRU | Instruction Manual - Page 40
    Adjustment Adjusting the Auto White Balance Each light source has its own color temperature. Therefore, when the main light source lighting the subject is changed, adjust the white balance again. 1 Press the [MENU] button. 2 Select [WHITE BALANCE] with the [J/K] button and "AWC" with the [H/I]
  • JVC TK-C2301WPRU | Instruction Manual - Page 41
    Adjustment m Error display If auto white balance adjustment is not successful, the following messages will appear on the monitor. AWC ERROR : NG : (Subject error) Displayed when there is not enough white color on the subject or the color temperature is not suitable. Fill the screen with a white
  • JVC TK-C2301WPRU | Instruction Manual - Page 42
    Menu Setting The Flow of Menu Screen . BASIC MENU (A page 45 - 46) A WHITE BALANCE (A page 45) ATW-N ATW-W AWC AGC WHITE BALANCE CONTROL (A page 45) (A page 46) SENSE UP (A page 46) CAMERA TITLE (A page 46) ADVANCED MENU (A page 47 - 55) ALC SETTINGS.. (A page 47 - 49) BRIGHTNESS
  • JVC TK-C2301WPRU | Instruction Manual - Page 43
    A PRIVACY MASK.. (A page 51) BRIGHTNESS MASK No. 1 MASK No. 2 MASK No. 3 MASK No. 4 MAINTENANCE.. (A page 51) CCD SPOT CORRECTION.. FACTORY SETTINGS.. DAY/NIGHT (A page 52) D/N MODE IR LED MODE AUTO LEVEL AUTO TIME MOTION DETECT (A page 53) DETECT LEVEL AREA EDIT.. TITLE SIZE
  • JVC TK-C2301WPRU | Instruction Manual - Page 44
    Menu Setting Menu Setting Procedure 1 Press the [MENU] button. 2 Set the cursor (E) to a desired menu item with the [ J / K ] button. 3 Change the setting with the [ H / I ] button. When a setting has been changed, a change mark (Z) is displayed. 4 Press the [MENU] button to exit the setting. Memo
  • JVC TK-C2301WPRU | Instruction Manual - Page 45
    the white balance automatically according to the color temperature of the scene illumination (color temperature 3200 K to 8000 K). ATW-W: This mode supports a wider range of color temperature (color temperature 2300 K to 10000 K) than ATW-N. AWC : This is the AWC (preset white balance adjustment
  • JVC TK-C2301WPRU | Instruction Manual - Page 46
    Menu Setting BASIC MENU (Continued) AGC This item sets the AGC (Automatic Gain Control). [Setting values : OFF, MID, HIGH] (Default value: MID) Memo v When set to "HIGH", the screen appears grainy in dark places. v When [AGC] in the menu setting is set to "OFF", the camera won't be switched to
  • JVC TK-C2301WPRU | Instruction Manual - Page 47
    Menu Setting ADVANCED MENU ALC SETTINGS Screen BRIGHTNESS Adjusts video signal brightness level. The larger the value, dark area becomes more visible. The smaller the value, bright area becomes more visible. [Setting values : -5 to NORMAL to 5] (Default value: NORMAL) BLC AREA Press the [SET] button
  • JVC TK-C2301WPRU | Instruction Manual - Page 48
    Menu Setting ADVANCED MENU (Continued) B&W Av:Pk Sets the exposure detection method for the black-and-white mode to the ratio of the AVERAGE value and PEAK value. When the screen, other than the highlighted section, becomes dark, increase the AVERAGE value (ex. 10:0). When the highlighted section
  • JVC TK-C2301WPRU | Instruction Manual - Page 49
    Menu Setting WIDE-D LEVEL Enables subjects with a high contrast to be seen clearly and naturally. The larger the value, the higher the contrast. The smaller the value, the lower the contrast. [Setting values : -5 to NORMAL to 5] (Default value: NORMAL) Memo When the [WIDE-D] switch is set to "OFF",
  • JVC TK-C2301WPRU | Instruction Manual - Page 50
    Menu Setting ADVANCED MENU (Continued) AUTO BLACK Adjusts the black level of the video signal. [Setting values : OFF, ON] (Default value: ON) ENHANCE LEVEL Adjusts contour correction to enhance sharpness on the monitor screen. [Setting values : -5 (soft) to NORMAL to 5 (sharp)] (Default value:
  • JVC TK-C2301WPRU | Instruction Manual - Page 51
    Menu Setting PRIVACY MASK Screen This function allows you to set and mask the parts on the screen that you do not wish to shoot so that they are not recorded. For details, refer to "Setting the Privacy Mask" (A page 56). BRIGHTNESS Sets the brightness of the part of the image that was masked. The
  • JVC TK-C2301WPRU | Instruction Manual - Page 52
    Menu Setting ADVANCED MENU (Continued) DAY/NIGHT Screen D/N MODE Sets the displayed video when the DAY & NIGHT selector switch is set to "AUTO". When set to black-and-white mode, the IR cut filter is switched off and the sensitivity is increased. [Setting values : B&W (black-and-white), AUTO (black
  • JVC TK-C2301WPRU | Instruction Manual - Page 53
    Menu Setting MOTION DETECT Screen DETECT LEVEL Sets the level to detect movements. The larger the value, the higher the sensitivity. The smaller the value, the lower the sensitivity. [Setting values : -5 to NORMAL to 5] (Default value: NORMAL) Memo Even the flicker of a fluorescent lamp can be
  • JVC TK-C2301WPRU | Instruction Manual - Page 54
    Menu Setting ADVANCED MENU (Continued) AUX FUNCTION Screen AUX FUNCTION Sets the input/output signal of the AUX terminal. [Setting values : IN:ALARM, IN:D/N, OUT:ALARM, OUT:B&W] (Default value: IN:ALARM) IN:ALARM : Displays image on the monitor when alarm signal is input from the AUX terminal.
  • JVC TK-C2301WPRU | Instruction Manual - Page 55
    value: MAKE) Memo When the [AUX FUNCTION] switch is set to "IN:ALARM" or "IN:D/N", [OUT POLARITY] does not work even if it is set. Manual Adjustment of White Balance White balance of this camera can be set to adjust automatically according to the subject. When the automatic adjustment results in
  • JVC TK-C2301WPRU | Instruction Manual - Page 56
    Setting Examples Setting the Privacy Mask 1 Select the [ADVANCED MENU] item on the menu screen and press the [SET] button. 2 Select the [PRIVACY MASK] item with the [J/K] button and press the [SET] button. The PRIVACY MASK screen appears on the monitor. 3 Select the mask number with the [J/K]
  • JVC TK-C2301WPRU | Instruction Manual - Page 57
    Setting Examples Settings in Dark Locations The followings are examples of recommended settings for recording scenes in various dark locations. m Setting the displayed images (black and white or color) (Set in [D/N MODE]) Default setting is "AUTO", to switch the displayed images (Color/black and
  • JVC TK-C2301WPRU | Instruction Manual - Page 58
    Setting Examples Settings in Dark Locations (Continued) m Changing the level of brightness to switch the images (Color/ black and white) [AUTO LEVEL] in [DAY/NIGHT] is set to "NORMAL" in default. Change the setting by comparing below values and the "NORMAL" setting, and selecting the appropriate
  • JVC TK-C2301WPRU | Instruction Manual - Page 59
    Setting Examples m Recording the distant subjects Below settings are recommended when the subject in the distance needs to be captured brightly. Menu Setting Recommended Setting Values [SENSE UP] x2 [AGC] HIGH [ALC PRIORITY] PICTURE Memo v Confirm that the black and white images (IR LED
  • JVC TK-C2301WPRU | Instruction Manual - Page 60
    Others Specifications Items Image pickup device Effective Pixels Television System Scanning Frequency TK-C2301WPRU 1/3" Interline Transfer CCD TK-C2301WPRE 768 (H) x 494 (V) 752 (H) x 582 (V) Based on NTSC System Based on PAL System Horizontal: 15734.26 Hz ± 0.003 % Vertical: 59.94 Hz ± 0.
  • JVC TK-C2301WPRU | Instruction Manual - Page 61
    Items Ambient temperature Mass Dustproof / Rainproof Option Accessories Others TK-C2301WPRU TK-C2301WPRE -10 f to 50 f (14 g to 122 g) (Operation) 0 24V AC power source.) INSTRUCTIONS ......... 1 WARRANTY CARD .... 1 WRENCH 1 SILICA GEL 1 TEMPLATE 1 SHEET 1 INSTRUCTIONS ......... 1 CD-ROM
  • JVC TK-C2301WPRU | Instruction Manual - Page 62
    (inch)] 121 (4-3/4) 113 (4-1/2) . Φ160 (6-1/4) Attach the fall prevention wire here. Screw for conduit (bottom surface, side surface) (TK-C2301WPRU: G3/4-14 UNC, TK-C2301WPRE: M25) 9 (3/8) 126 (5) (1S-R3/443) .7 Φ160 (6-1/4) * Specifications and appearance of this camera are subject to change
  • JVC TK-C2301WPRU | Instruction Manual - Page 63
    Others E-63
  • JVC TK-C2301WPRU | Instruction Manual - Page 64
    LST1406-001A TK-C2301WPRU TK-C2301WPRE FIXED IR DOME CAMERA ©2012 JVC KENWOOD Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
FIXED IR DOME CAMERA
TK-C2301WPRU
(For USA and Canada)
TK-C2301WPRE
(For Europe)
INSTRUCTIONS
Serial No.
Model No.
Enter below the Serial No. which is located
on the body. Retain this information for future
reference.
TK-C2301WPRU
For Customer Use of TK-C2301WPRU :
LST1406-001A