JVC UXG50 Instructions
JVC UXG50 - CD Microsystem With USB Audio Manual
 |
UPC - 046838023613
View all JVC UXG50 manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC UXG50 manual content summary:
- JVC UXG50 | Instructions - Page 1
MICRO COMPONENT SYSTEM UX-G500V -Consists of CA-UXG500V and SP-UXG500V SUPER VIDEO INSTRUCTIONS GVT0249-006A [US/UB/UN/UG/UX/A/UH/UW] - JVC UXG50 | Instructions - Page 2
the mains plug to shut the power off completely (the STANDBY lamp goes off). The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • When the System is on standby, the STANDBY lamp lights red. • When the System is turned on, the - JVC UXG50 | Instructions - Page 3
the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or - JVC UXG50 | Instructions - Page 4
cord and consult your dealer before operating any further. DO NOT disassemble the System since there are no user serviceable parts inside. • If you are not going to operate the System for an extended period of time, unplug the power cord from the wall outlet. If anything goes wrong, unplug the - JVC UXG50 | Instructions - Page 5
38 Learning More about This System 38 Maintenance 40 Troubleshooting 41 Display Messages for Recording or Editing Operations 42 Language Code List 43 Optical Digital Out Signals 44 Operating JVC's TVs Using the Remote Control 44 Specifications 45 Parts Index 46 Advanced Playback Operations - JVC UXG50 | Instructions - Page 6
be played back: DVD-RAM, CD-I (CD-I Ready), CD-ROM, and Photo CD. Playing back these discs will generate noise and damage the speakers. • CD Text and DVD Text can be played, but Text information will not be shown on the display. • In this manual, "file" and "track" are used interchangeably. • It is - JVC UXG50 | Instructions - Page 7
input of digital audio component See page 5. @ From the input of TV/monitor See page 6. ¤ To a wall outlet Plug in the power cord only after all connections have been completed. • If the wall outlet does not match the AC plug, use the supplied AC plug adapter (not supplied for Australia, Thailand - JVC UXG50 | Instructions - Page 8
the foot spacers at the bottom of the speakers. ! Digital audio component FM outdoor antenna (not supplied) Protective cap Optical digital cord (not supplied) Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector. • Set "DIGITAL - JVC UXG50 | Instructions - Page 9
. In this case, disconnect and connect the USB mass storage class device again after turning off the System. When connecting a digital audio player On the front panel Stereo mini plug (not supplied) From audio output (or headphone out, etc.) Preparing the remote control Insert the battery into the - JVC UXG50 | Instructions - Page 10
illuminate on the display. 1 USB indicator • Lights when "USB MEM" is selected as the source. 2 REC (recording) indicator • Lights when recording started. 3 Disc format indicators • SVCD: lights when playing back an SVCD. • VCD: lights when playing back a VCD. • CD: lights when playing back - JVC UXG50 | Instructions - Page 11
explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. Remote control Number buttons 1 Turn on the power. The STANDBY lamp on the main unit turns off. • Instead of pressing AUDIO/TV, the System is turned on by pressing one of - JVC UXG50 | Instructions - Page 12
To select 10 kHz: The M (monaural) indicator lights on the display. Reception will improve though stereo effect is lost- Monaural reception. To restore the stereo effect, press the button again. The M (monaural) indicator disappears. To preset the stations Remote ONLY You can preset 30 FM and 15 - JVC UXG50 | Instructions - Page 13
store. • To select a number, see "How to select a number" on page 9. • You can also use the ¡ or 1 button. Playing Back a Disc/USB Mass Storage Class Device INFO To insert a disc Main Unit ONLY 4 Store the station. Remote To tune in to a preset station ONLY 1 Select the band (FM or AM). 2 Select - JVC UXG50 | Instructions - Page 14
stopped.) For details, see page 32. • The System can store the stop point, and when you start playback again by pressing DVD/CD 6 or USB 6 (even while on standby), it starts from the position where you have stopped-Resume Play. (RESUME indicator lights on the display when you stop playback.) To stop - JVC UXG50 | Instructions - Page 15
the AUDIO IN jack. • Make sure to turn down the volume on the System to minimum level before starting playback. • For some discs, you can also select items by entering the number using the number buttons. For SVCD/VCD with PBC: While playing a disc with PBC, "PBC" appears on the display. When disc - JVC UXG50 | Instructions - Page 16
Turbo II. TURBOOFF (Canceled) • When Sound Turbo II is turned on, AHB Pro (see below) is automatically turned on, and cannot be turned off. (The AHB indicator does not light even though the function is turned on.) To reinforce the bass sound Remote ONLY While Sound Turbo II is off, the richness - JVC UXG50 | Instructions - Page 17
MY SOUND Remote ONLY Each individual response to audio frequency differently. MY SOUND is to store the response to audio frequency. To 4 Follow the TV on-screen instructions to store in PRESET 1, 2, or 3. 2 Enter MY SOUND setup. 3 Follow the TV on-screen instructions to start the measurement. MY - JVC UXG50 | Instructions - Page 18
"DVD/CD" is selected as the source... Creating 3-Dimensional Sound Field Remote -3D Phonic ONLY • This only functions while listening to disc/USB mass ...) (Canceled) Changing the Display Brightness You can dim the display. While the System is turned on... ACTION DRAMA THEATER Suitable - JVC UXG50 | Instructions - Page 19
Setting the ECO (ecology) Mode Setting the ECO mode allows you to reduce power consumption by turning the display off while on standby. While the System is on standby... Changing the Picture Tone Remote ONLY While showing a playback picture on the TV, you can select a preset picture tone, or - JVC UXG50 | Instructions - Page 20
Select a parameter you want to adjust. Remote Setting the Clock INFO ONLY Without setting the built-in clock, you cannot use Daily Timers (see page 34). • Only while playing back a disc or USB mass storage class device. ** Only while playing back the following discs/files: DVD-VR: Program - JVC UXG50 | Instructions - Page 21
Off the Power Remote Automatically ONLY Auto Standby • This only functions while playing a disc or USB mass storage class device. A.STBY indicator lights on the display. Sleep Timer You can set the shut-off time so that you can go to bed without turning off the System yourself. 1 Specify - JVC UXG50 | Instructions - Page 22
Unique Video Disc/File Operations Remote control USB 6 DVD/CD 6 SLOW , Remote Selecting the Audio Track INFO ONLY For DivX files/DVD Video: While playing back a chapter/ file containing several audio languages, you can select the language to listen to. For DVD-VR/SVCD/VCD: While playing back a - JVC UXG50 | Instructions - Page 23
different languages, you can select the subtitle language to display on the TV. For DVD-VR: While playing, you can turn the subtitles on or off. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc. • For DVD Video/DVD-VR/SVCD: You can also - JVC UXG50 | Instructions - Page 24
Special Effect Playback INFO Still picture playback To display the still picture: While playing... Disc USB mass storage class device To resume normal playback, press either button again. Frame-by-frame playback Remote ONLY • This function is used only while playing DVD Video/ DVD-VR/SVCD/VCD. - JVC UXG50 | Instructions - Page 25
playback. • Program play cannot be used for the USB mass storage class device, DVD-VR and JPEG/MPEG-1/MPEG-2/ DivX files on a disc. • Resume does not work for Program Play. 1 Before starting playback, activate Program Play. Canceled On the display PROGRAM No 1 2 3 4 5 6 7 8 9 10 Group/Title - JVC UXG50 | Instructions - Page 26
To erase the last step: Playing at Random Remote -Random Play ONLY You can play all chapters or tracks at random. • Random Play cannot be used for the USB mass storage class device, DVD-VR and JPEG/MPEG-1/MPEG-2/ DivX files on a disc. 1 Before starting playback, activate Random Play. Canceled - JVC UXG50 | Instructions - Page 27
Remote Playing Repeatedly INFO ONLY • For DVD Video/DVD-VR/SVCD/VCD/CD: You can also select the repeat mode using the on-screen bar (see pages 30 and 31). For DVD Video: While playing... (Canceled) For CD/SVCD/VCD: While playing (without PBC for SVCD/VCD) or before playback... (Canceled) For - JVC UXG50 | Instructions - Page 28
INFO Remote control System) The System uses the Serial Copy Management System which allows only first-generation digital copies to be made of premastered software such as regular CDs. If you try to record from a duplicated CD-R or CD-RW into the USB device, "SCMS VLT" appears on the display - JVC UXG50 | Instructions - Page 29
Disc You can record tracks in digital recording from a CD onto the USB device. • Do not vibrate the System while recording/editing tracks. Take care especially while "WAIT" is shown on the display. It may damage the recorded tracks on the System recording manually: to Tracks Remote or Groups - JVC UXG50 | Instructions - Page 30
3 Select the track/group title editing mode. Entering Titles Remote ONLY 1 Select the character type. (while holding...) or 4 Confirm to 6. See page 42 for more information about the warning message appears on the display. 3 Confirm the entry. "NO NAME" appears if no characters is selected in - JVC UXG50 | Instructions - Page 31
3. To quit title entry • The entered titles are not stored. (while holding...) 4 Confirm the selection. (Canceled) Remote Erasing the Tracks or Groups ONLY You can erase tracks/groups on the USB device. • Once the tracks are erased, you cannot resume them. • To go back to the previous step - JVC UXG50 | Instructions - Page 32
Remote control USB 6 DVD/CD 6 Number buttons ON SCREEN Remote On-screen Bar Operations INFO ONLY You can check the source information (disc/USB mass storage class device) and playback status by using Select for chapter search. Select to change the audio language or channel (see also page 19). - JVC UXG50 | Instructions - Page 33
To operate using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video While "DVD/CD" is selected as the source... 1 Display the entire /track (not applicable for DVD-VR). Elapsed disc time. Remaining time of title (DVD Video)/ program (DVD-VR)/disc (SVCD/VCD). To remove the on-screen - JVC UXG50 | Instructions - Page 34
for SVCD/VCD), display the entire on-screen bar. • Time Search can also be used before starting playback (not applicable for DVD Video/DVD-VR). 2 Select . 3 Display the pop-up 2 to erase the last entry. 5 Confirm your entry. The System starts playing the disc from the selected playing time. 31 - JVC UXG50 | Instructions - Page 35
is not available during Program Play and Random Play. 1 While playing, display the entire on-screen bar. 2 Select CHAP. . ORIGINAL PROGRAM System starts playing the selected chapter. 5 Title 6 Highlight bar (current selection) 7 Chapters included 8 Playback time Control Screen Operations Remote - JVC UXG50 | Instructions - Page 36
on the TV when the System detects MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX files on the loaded disc or connected USB mass storage class device. • and display the current still picture, press the same button again. For the other files: Playback starts with the selected track. • Pressing DVD/CD 6 or USB - JVC UXG50 | Instructions - Page 37
control Daily Timer Operations AUDIO CANCEL Remote Setting the Daily Timer INFO ONLY Using Daily Timer, you can wake setting mode is selected • When the clock has not been set, pressing CLOCK/TIMER makes the System enter the clock setting mode (see page 17). 2 Set the timer as you like. - JVC UXG50 | Instructions - Page 38
," "DISC," "AUDIO IN," or "USB." 4 For "TUNER-FM" or "TUNER-AM": Select a preset channel. For "DISC": Select display. Daily Timer is activated at the same time everyday until the timer is turned off manually (see the next column) or another timer is activated. When the on-time comes The System turns - JVC UXG50 | Instructions - Page 39
Remote ONLY You can change the settings of the System. • The Setup Menu can be used only when "DVD/CD" or "USB MEM' is selected as the source. 1 Press SET UP while playback is stopped. LANGUAGE MENU LANGUAGE AUDIO conversion): For a conventional (4:3) TV. Displays a wide-screen picture to fit the - JVC UXG50 | Instructions - Page 40
this when connecting to a stereo receiver, MD player, etc. D. RANGE COMPRESSION You can enjoy powerful audio even at a low volume level while playing Dolby Digital software. AUTO: Select to apply the effect to multi-channel encoded software. ON: Select to always use this function. RESUME You can - JVC UXG50 | Instructions - Page 41
this happens, preset the stations again. Playing Back a Disc/USB Mass Storage Class Device: JVC bears no responsibility for any loss of data in the USB mass storage class device while using this System. • When you change the source to "DVD/CD" or "USB MEM," it may take a while to activate the source - JVC UXG50 | Instructions - Page 42
your TV to the unit using a component video cord. • When you play back an NTSC disc/file in progressive scanning mode either NTSC PRG or PAL PRG, the System outputs the NTSC signal regardless of the color system settings. Setting the Clock: • "0:00" will flash on the display until you set the clock - JVC UXG50 | Instructions - Page 43
of the System, keep your discs and mechanism clean. Handling Discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc. • Put the disc back in its case after use to prevent warping - JVC UXG50 | Instructions - Page 44
is too close to the System. ] The FM antenna is not properly extended and positioned. Disc/USB mass storage class device Playback Operations The disc does not play. ] You have inserted a disc whose Region Code is not "2." ("RG ERROR" appears on the display.) ] The disc is placed upside down. Place - JVC UXG50 | Instructions - Page 45
came. Timer starts working only when the System is turned off. Daily Timer does not start playback. ] The loaded disc is a DVD Video. Change the disc. Display Messages for Recording or Editing Operations NODEVICE • No USB device is connected or the connected USB device is not compatible with this - JVC UXG50 | Instructions - Page 46
AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Tibetan BR Breton CA Catalan CO Corsican CY Welsh DA Danish DZ Bhutani EL Greek EO Esperanto ET Estonian EU Basque FA Persian FI Finnish FJ Fiji FO Faroese - JVC UXG50 | Instructions - Page 47
PCM 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM CD with DTS DTS bitstream 44.1 kHz, 16 bit Linear PCM MP3/WMA/WAV/MPEG terminal if the discs are not copy-protected. Operating JVC's TVs Using the Remote Control Remote control You can use the remote control to operate JVC's TVs. TV/ - JVC UXG50 | Instructions - Page 48
mm × 247 mm (W/H/D) Mass (approx.): 2.6 kg Speakers-SP-UXG500V Speaker units: Tweeter: 1.5 cm dome x 1 Woofer: Impedance: Dimensions (approx.): 10 cm cone x 1 4 Ω 160 mm × 250 mm × 169 mm (W/H/D) Mass (approx.): 1.8 kg each Supplied Accessories See page 4. Design and specifications are - JVC UXG50 | Instructions - Page 49
TV CH UP, DOWN TV/VIDEO USB 6 VFP ZOOM Main unit Name 7 0 ¢ DOWN, UP 4 AUDIO IN jack AUDIO IN CD 3 USB REC Disc tray Display DVD/CD #/8 FM/AM (TUNER) PHONES jack Remote sensor SOUND TURBO II, DEMO STANDBY lamp USB MEMORY #/8 USB MEMORY REC/PLAY VOLUME +, - Parts Index Page u 8, 35 a 10, 12, 22 - JVC UXG50 | Instructions - Page 50
EN © 2008 Victor Company of Japan, Limited 0508WMKMDWJMM UX-G500V MICRO COMPONENT SYSTEM
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
 |
 |
MICRO COMPONENT SYSTEM
UX-G500V
—Consists of CA-UXG500V and SP-UXG500V
SUPER VIDEO
INSTRUCTIONS
GVT0249-006A
[US/UB/UN/UG/UX/A/UH/UW]