Jabra BT8040 User Manual - Page 12

english I am having pairing problems • You may have deleted your headset pairing connection in your mobile phone. Follow the pairing instructions. I want to reset the headset It is possible to reset and test the headset by 'Pressing and holding' all three buttons at the same time. The red, blue, and green lights will light up in a white light. In this mode, the pairing list is reset, and you can test if the headset works, as you will be able to hear audio in the speaker from the microphone. The headset will automatically turn off after approx. 10 seconds. The next time you power on, the headset will go into pairing mode just like the first time you powered on your new BT8040. Will the Jabra BT8040 work with other Bluetooth equipment? • The Jabra BT8040 is designed to work with Bluetooth mobile phones. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and that support a headset, hands-free, and/or advance audio distribution profile. I cannot use reject call, call on hold, redial, or voice dialing These features are dependent on the ability of your phone to support a hands-free profile. Even if the hands-free profile is implemented, the reject call, call hold, or voice dialing are all optional features that are not supported by all devices. Please consult your device manual for further details. Please note that some features can only be operated from the primary device e.g. voice dial using Jabra BT8040 with 2 mobile phones. The device does not connect to my headset in time to answer an incoming call If the headset is off and is turned on when a call is incoming, the device and headset might not connect in time for the call to be answered. In order to avoid such inconveniences please keep the headset on, in range, and connected. Jabra bt8040 Bluetooth sterEo headset 10