Jabra CRUISER User manual - Page 46

english USING THE FM TRANSMITTER WHEN VOICE ANNOUNCEMENT FUNCTION IS OFF If voice announcement function is turned off you can select any of the pre-programmed frequency channels in the following order: Channel No Pre-programmed Frequency LED indication (FM Frequency selection mode) Battery Call status status Bluetooth status FM status 1 88.1 MHz Off Off On 2 88.3 MHz Off On Off 3 88.5 MHz On Off Off 4 88.7 MHz Off On On Flash 5 88.9 MHz On Off On 6 89.1 MHz On On Off 7 89.3 MHz On On On To select the desired FM frequency channel, follow these steps: - Connect your mobile phone and speakerphone. - Press FM button to enter FM mode. The default frequency channel is 88.1MHz - Press the Volume Up or Volume Down button to move to the next/previous channel. - Manually turn your radio into the same FM frequency and you are now ready to transmit calls or music from your phone to your car stereo. Note 1: While changing frequencies the FM Status Icon flashes every 1 second. Note 2: While changing frequencies, a repeated beep-tone will be heard and frequencies can be recognized by the combinations of Status Indicators. (See the table above.) Jabra CRUISER 12