Jabra DRIVE User manual - Page 8
Connecting With Your Phone Automatically - bluetooth manual
View all Jabra DRIVE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
english 4 Your phone will find the Jabra DRIVE Your phone will find the speakerphone under the name "JABRA DRIVE". Your phone then asks if you want to pair with the JABRA DRIVE. Accept by pressing 'Yes' or 'OK' on the phone and/or confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. CONNECTIVITY MobilSurf BLUETOOTH Infrared port Wap options Synchronization Networks SELECT DEVICES FOUND Jabra DRIVE Jabra DRIVE Passkey: **** SELECT OK HANDSFREE Jabra DRIVE added. The handsfree is now ready for use SELECT Manual pairing mode If you wish to use the speakerphone with a different phone, or if the pairing process was interrupted, you can manually set the speakerphone to pairing mode. Turn the speakerphone on. Press and hold the answer/end button for approximately 5 seconds until the status light stars blinking rapidly blue. Then repeat steps 2. and 3. in the above pairing guide. CONNECTING WITH YOUR PHONE AUTOMATICALLY Pairing is only needed the first time a speakerphone and phone are used together. When the speakerphone and phone have been paired once they will automatically connect when the speakerphone is on and Bluetooth® is activated on the phone. The speakerphone can be used when it is "connected" to the phone. If the devices are paired, but do not immediately connect, tap the answer/end button. Jabra DRIVE 7