Jabra EXTREME User manual - Page 11

english I want to reset the headset - It is possible to reset and test the headset by 'pressing and holding' all three buttoms at the same time. The red, blue and green light will light up in a white light. In this mode, the pairing list is reset, and you can test if the headset works as you will be able to hear audio in the speaker from the microphone. - The headset will automatically turn off after approx. 10 seconds. The next time you power on, the headset will go into pairing mode as the first time you powered your new EXTREME on. Will the Jabra EXTREME work with other Bluetooth® equipment? - The Jabra EXTREME is designed to work with Bluetooth® mobile phones. It can also work with other Bluetooth® devices that are compliant with Bluetooth® version 1.1 or higher and support a headset, hands-free and/or advance audio distribution profile. I cannot use Reject call, call on hold, Redial or voice dialling These features are dependent on the ability of your phone to support a hands-free profile. Even if the handsfree profile is implemented reject call, call hold and voice dialing are optional features which are not supported by all devices. Please consult your device manual for details. Please note that some features can only be operated from the primary device e.g. voice dial using Jabra EXTREME with 2 mobile phones. The music player starts playing when connecting to the headset, you experience connect/disconnect issues or the headset has short battery life. Pair your headset again to the device in order to avoid this behavior. 1. Ensure that the headset is on. If the music streaming has started, turn the music player on the phone off. 2. Press and hold the answer/end button for approx. 5 sec. until the light turns to solid blue 3. Continue to press and hold the answer/end button until the solid blue light turns off 4. Continue to press and hold until a solid purple light turns on Go through the regular steps in pairing the headset to a Bluetooth® device. Jabra EXTREME 10