Jabra GN9350 User Manual - Page 10

3. Wearing styles Your headset offers headband, neckband and ear hook wearing styles. Note: GN9330e and GN9330e USB come with an ear hook and a headband. Neckband is available as an accessory. GN9350e GN9330e GN9330e USB 3.1 Headband wearing styles You can choose to wear the headset on either the left or right ear. The headset can be rotated 360˚. Changing boom arm wearing side (headband) 1. Rotate boom arm unit 90°. GN9350e GN9330e GN9330e USB 3.2 Neckband wearing style With the neckband, the headset is worn on the right ear. Note: This wearing style is available as an accessory for GN9330e and GN9330e USB. GN9350e GN9330e GN9330e USB 3.3 Ear hook wearing styles You can choose to wear the headset on either the left or right ear. The headset can be rotated 360˚. Changing ear hook wearing side 1. Flip the ear hook over. 2. Rotate the ear hook 180°. GN9350e GN9330e GN9330e USB 3.4 Changing wearing styles All wearing styles (headband, neckband and ear hook) are interchangeable. To change any wearing style (for example, from headband to ear hook): 1. Unclip headset from the current wearing style. 2. Affix the new wearing style. 12 GN9350e GN9330e GN9330e USB 3.5 Receive volume button reorientation By default, the headset is set-up for wearing on the right ear. This means the volume control is pushed up to increase the volume, and pushed down to decrease the volume. If you change the wearing ear of the headset, you may also want to change the orientation of the volume control so that volume is still increased by pressing the volume control up. To change the headset's volume control button orientation: 1. Make sure there is no link between the headset and the base, (indicator on headset is not flashing). 2. Press the headset's mute button for 10 seconds. -> The headset's link indicator will light. 3. Determine how you prefer to increase volume (pushing the control either up or down). 4. Press the volume control either up or down (according to preference) until the headset's link indicator turns off. 4. Operating the headset GN9350e GN9330e GN9330e USB 4.1 Making/ending calls via telephone with RHL/EHS function 1. Ensure telephone mode is selected. 2. Remove headset from base, or press headset's talk button if already wearing it. -> RHL/EHS function will activate (handset lifts/telephone line connection opens). 3. Dial desired number. 4. Replace headset in base, or press the headset's talk button, or press the telephone button on the base. -> RHL/EHS function will deactivate (handset lowers/telephone line connection closes). GN9350e GN9330e GN9330e USB 4.2 Answering calls via telephone with RHL/EHS function 1. The telephone rings. 2. Remove headset from base, press the headset's talk button, or press the telephone button on the base. -> The call will be connected (handset lifts/telephone line connection opens).  Important: During an incoming call, your GN9350e base will automatically change to the required mode when activated by a softphone, the ring sensor on GN1000 or via EHS adapter. (Depending on whether the call is coming via the desk phone (telephone) or via VoIP (USB)). After the call, it will revert to the default mode you selected earlier. The initial factory-set default is the telephone mode. 13