Jabra JOURNEY User manual - Page 8

english TURNING YOUR JABRA JOURNEY ON AND OFF Slide the I/O switch to turn the in-car speakerphone on or off. The first time you turn your in-car speakerphone on, it automatically enters pairing mode. If the switch is left in the ON (I) position the Jabra JOURNEY will turn off automatically after it has been disconnected with your phone for 10 min.. The in-car speakerphone will also automatically turn on and reconnect to your phone when you enter your car (open the car door). PAIRING YOUR JABRA JOURNEY WITH YOUR PHONE Jabra JOURNEY is connected to a mobile phone using a procedure called 'pairing'. By following a few simple steps and voice guidance, a phone can be paired with the in-car speakerphone in a matter of seconds. 1 Activate Bluetooth® on your mobile phone Please check the manual for your mobile phone. 2 Put the in-car speakerphone in pairing mode When you turn on your Jabra JOURNEY for the first time, the in-car speakerphone will automatically start up in pairing mode - i.e. it can be detected by your phone. When the in-car speakerphone is in pairing mode the status light will flash rapidly blue and a voice will guide you through the pairing process. 3 Set your Bluetooth® phone to 'search' for the Jabra JOURNEY Follow your phone's instruction guide. Then set your phone to search for devices. This usually involves going to a 'setup,''connect' or 'Bluetooth®' menu on your phone and selecting the option to 'search' or 'add' a Bluetooth® device.* 4 Your phone will find the Jabra JOURNEY Your phone will find the in-car speakerphone under the name "JABRA JOURNEY". Your phone then asks if you want to pair with the JABRA JOURNEY. Accept by pressing 'Yes' or 'OK' on the phone and/or confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm with announcement "Connected" when pairing is complete. Jabra JOURNEY 7 *Phone dependent