Jensen PS285 Operation Manual
Jensen PS285 - Amplifier Manual
 |
View all Jensen PS285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Jensen PS285 manual content summary:
- Jensen PS285 | Operation Manual - Page 1
, NY 11788 1-800-323-4815 www.jensen.com © 2004 Audiovox v.030204 Amplifier Installation & Operation Manual PS260 PS285 PS2130 PS2180 Contents Introduction 1 Features 1 Installation 3 Wiring 5 Indicators and Controls 9 Testing 9 Troubleshooting 11 Specifications 11 Audio Precision 14 - Jensen PS285 | Operation Manual - Page 2
PS2180 PS 260, PS285, PS2130 & PS2180 Manual de Instalación y Operación PS 260, PS285, PS2130 & PS2180 Manual de Installation Et Operation envíe el recibo con el producto. Service De Garantie Si votre amplificateur Jensen requiert quelquefois d'un service après-vente, vous devrez avoir la facture - Jensen PS285 | Operation Manual - Page 3
PS285 electrical system. Supplies and Tools Needed To install the amplifiers, you will need tools, supplies and adapters. , and do not mount the amplifier in an inverted or upside down configuration. Be sure the mounting permanently damaged. Follow the installation instructions carefully, or have the - Jensen PS285 | Operation Manual - Page 4
realice un técnico especializado. PS260 / PS285 / PS2130 / PS2180 Installation Cet appareil chaleur ou d'humidité. S'assurer que le forage des trous-guides à cet emplacement n'endommagera pas le circuit électrique, les instructions soigneusement ou vous permetez que l'instalation la réalise un technique - Jensen PS285 | Operation Manual - Page 5
Battery + Terminal Al Terminal de la Batería + A la Borne de Batterie + +12V POWER REM GND PS260 PS285 PS2130 BASS REL TREB BAL FADE VOL CD2620 CD-R/RW AUX IN iEQ 4 JPTH LOC/DX 1 CD RECEIVER 40 WATTSx4 te de feuille de châssis. PS260 PS285 PS2130 PS2180 25 AMP 30 AMP 2x25 AMP 2x40 AMP 5 - Jensen PS285 | Operation Manual - Page 6
an RCA output is not available from the receiver. Connect the speaker outputs from the receiver to the high level input connector. Note: la Salida Câblage de Rendement PS260 / PS285 / PS2130 / PS2180 Input Wiring Cableado de Entrada Câblage d'Entrée PS260 / PS285 1.4 4 5 2 180 80 300 Hz - Jensen PS285 | Operation Manual - Page 7
PS260 / PS285 / PS2130 / PS2180 Wiring (continued) Speaker Wiring The Speaker Wiring diagrams illustrate the following four options for connecting speakers and subwoofers to the PS amps: • Two Speakers • Two Subwoofers • Bridged Subwoofer • Tri-Mode Note: When running a subwoofer and two full-range - Jensen PS285 | Operation Manual - Page 8
Energie Borne électrique (+ 12V) Brancher directement à la borne positive (+) de la batterie du vehicule avec un câble d'alésage 10 (PS260 et PS285) ou 8 (PS2130 et PS2180). Borne à Distance (REM) Brancher l'antenne ou la tête d'allumage du amplificateur de le recepteur à la borne à distance. Borne - Jensen PS285 | Operation Manual - Page 9
speakers. Test Speaker Connections These tests make sure the speakers are connected properly. If speakers don't play at all, one (or both) speaker wires may be disconnected. PS260 PS285 indicator provides a visual indication that a problem exists and the protection circuitry has protected the - Jensen PS285 | Operation Manual - Page 10
que los altavoces estén conectados correctamente. Si los altavoces no suenan, uno o ambos cables de los altavoces pueden estar desconectados. PS260 / PS285 / PS2130 / PS2180 Indicateurs et Contrôles (continué) Poussée Basse (Bass Boost) Le dispositif de poussée basse est sans interruption réglable - Jensen PS285 | Operation Manual - Page 11
PS260 / PS285 / PS2130 / PS2180 Troubleshooting Problem Amplifier does not turn on Volume control too sensitive Distorted sound Blows fuse(s) at amp Engine noise / Alternator whine Thermal protection activated Short circuit protection activated Low impedance protection activated Poor bass response - Jensen PS285 | Operation Manual - Page 12
conectados con el amplificador, y todas las conexiones de energía están correctas, ésta indica un problema interno con el amplificador. 12 PS260 / PS285 / PS2130 / PS2180 Especificaciones Grados De Energía de CEA PS260 Salida de energía: 57 vatios RMSx2 canales a 4-ohmios @ < 1% THD+N Salida de - Jensen PS285 | Operation Manual - Page 13
les câbles d'électricité Envoyez l'unité pour service Bruit de moteur/ alternateur Boucles de terre Terre 2 canaux dans 4-ohms Dimensions: 7" X 12" X 2 ¼" (180mm X 302mm X 55.5mm) PS285 Rendement de puissance: 80 watts RMSx2 canaux dans 4-ohms @ < 1% THD+N Rendement de puissance additionne: - Jensen PS285 | Operation Manual - Page 14
Left Power output - Rated power/4-ohm load. All channels driven. Bridged mono. 1kHz tone. 19 Jensen THD+N vs Power @ 2-ohm_stereo.at1 21 Jensen THD+N vs Power @ 4-ohm_bridged mono.at1 PS285 Audio Precision THD+N vs. Power 5 1 % 0.1 0.01 0.001 20 40 60 80 100 W Color Line Style - Jensen PS285 | Operation Manual - Page 15
PS260 / PS285 / PS2130 / PS2180 PS2130 Audio Precision THD+N vs. Power Audio Precision THD+N vs. Power power/4-ohm load. All channels driven. Bridged mono. 1kHz tone. 19 Jensen THD+N vs Power @ 2-ohm_stereo.at1 21 Jensen THD+N vs Power @ 4-ohm_bridged mono.at1 PS2180 Audio Precision THD+N - Jensen PS285 | Operation Manual - Page 16
PS260 / PS285 / PS2130 / PS2180 12-Month Limited Warranty AUDIOVOX CORPORATION (the Company) Warranty does not extend to the elimination of car static or motor noise, to correction of antenna problems, to costs incurred for installation, removal, or reinstallation of the product, or damage to tapes,
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Amplifier
Installation &
Operation Manual
PS260
PS285
PS2130
PS2180
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Indicators and Controls . . . . . . . . . . . . . . . . . . . . . 9
Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Audio Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Audiovox Electronics Corporation
150 Marcus Boulevard
Hauppauge, NY 11788
1-800-323-4815
www.jensen.com
© 2004 Audiovox
v.030204
Introduction
Thank you for purchasing a Jensen amplifier. PS series amplifiers offer extreme value and performance. Proper installation is
essential for optimal performance and long-term reliability. Please read through this manual to familiarize yourself with your
amplifier and its functions.
Warranty Service
If your Jensen amplifier should ever require service, you will need to have the original dated receipt. If you need to return the unit
for any reason, always include the receipt with the product.
Installation Assistance
For installation assistance, call 1-800-323-4815 during normal business hours, or visit www.jensen.com at any time.
Features
•
Continuously variable high pass/low pass crossover
•
State-Variable crossover design for precision frequency adjustment
•
12dB/octave Butterworth alignment
•
40Hz – 400Hz crossover frequency range
•
iX² Bass with continuously variable 0dB to 18dB bass boost centered at 45Hz
•
Input level control with a 300mV to 8V input range
•
High level inputs for interfacing with OEM/factory head units
•
Full range pre-amp output for installation flexibility
•
Dual status LED diagnostic indicator
•
Thermal, short circuit and low impedance protection circuitry
•
Unregulated Pulse Width Modulated (PWM) power supply for extended dynamic range
•
Balanced driver circuitry and complementary output stage design for low distortion and unparalleled stability
•
High current output stage easily drives 2 ohm loads
•
Bridgeable for mono operation
R