Jensen VM9312 Instruction Manual - Page 16

12

VM9312

OPERATING INSTRUCTIONS

Power On / Off

Press the

/SRC

button (6) on the unit (or the

button (4)

on the remote control) to turn the unit on. The buttons on the

front of the unit light up and the current mode status appears

in the LCD (7). You can also turn on the unit by pressing the

OPEN

button (1) and opening the TFT screen.

Press and hold

the

button to power off the unit.The monitor

is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The

Beep tone can be disabled through the Setup menu.

Mute

Press the

MUTE

button (8) on the front panel or the

MUTE

button (3) on the remote to mute the volume from the unit.

Press the

MUTE

button again to restore the volume. “MUTE”

is displayed on the LCD. Adjusting the volume or using any of

the audio setup features cancels the mute function.

Playing Source Selection

Press the

SRC

button (6) on the front panel or the

SRC

button (8) on the remote to change between available playing

sources in the following order: AM/FM, DISC, AUX IN1, AUX

IN2, SAT, and CAMERA. The playing mode is displayed on

the TFT and LCD screens.

External peripheral devices can be connected to this unit via

RCA output or MediaLink. Select “AUX-IN1” or “AUX IN2”

mode to access and control connected auxiliary devices.

Volume Adjustment

To increase or decrease the volume level, turn the rotary

encoder (5) on the front panel or press the

VOL+/ VOL-

buttons (15, 16) on remote control. When the volume level

reaches “0” or “40”, a beep sounds, indicating that the

adjustment limit has been reached. The volume ranges from

“0” to “40”. The LCD or TFT screen displays the volume level

for 3 seconds.

Audio Control Menu

The Audio Control feature allows you to easily adjust your

audio system to meet the acoustical characteristics of your

vehicle, which vary depending on the type of vehicle and its

measurements. Proper setting of the Fader and Balance

boosts the effects of the cabin equalizer.

Press the

AUDIO

button (5) on the front panel once to display

the audio menu. To adjust an audio feature:

1.

Turn the rotary encoder (5) on the front panel, press the

(

>>|

)/(

|

<<

) buttons (14, 22) on the remote control, or use

the joystick to highlight the audio feature to be adjusted.

2.

Press the joystick button (13) to select the highlighted

option.

3.

Rotate the

AUDIO

button (5), press the

|<<

,

>>|

,

>>

, or

<<

buttons (17, 19, 14, 22) on the remote control, or use

the joystick to adjust the selected feature to the desired

setting.

NOTE: The EQ mode will automatically change to

“USER” when individual audio functions are adjusted.

The Audio menu will automatically exit after a few seconds of

inactivity. To exit quickly, touch the top left corner of the

screen or press and hold the

AUDIO

button (5).

System Reset

To correct a system halt or other

illegal operation, use the tip of a pen

to press the reset button (12) located

on the front bottom-right corner of the unit. After a system

reset, the unit restores all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD

resumes play once the reset is complete.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a

telephone call is received by the car phone or when verbal

navigation is performed.

Table 4: Audio Adjustments

Audio Function

Adjustable Range

EQ

User

Acoustic

Urban

Rave

Latin

Dance

Hip Hop

Rock

BASS

-14 to +14

MID

-14 to +14

TREBLE

-14 to +14

SUB

-14 to 0

FAD

Grid

BAL

Grid

[RESET] Button

Jensen VM9312 Instruction Manual - Page 16

Power On / Off, Audible Beep Confirmation, Playing Source Selection, Volume Adjustment, Audio - no sound

Page 16 highlights