Jensen VM9312 Instruction Manual - Page 18

Setting Sub.W Phase Sub Filter Options Function 0 180 80Hz 100Hz 120Hz Subwoofer output IN phase Subwoofer output OUT OF phase NOTE: Depending on your installation, reversing the subwoofer phase may increase Bass output. Selecting a crossover frequency sets a cut-off frequency of the subwoofer's LPF (lowpass filter) and the "SMALL" speakers' HPF (high-pass filter). The Crossover frequency setting has no effect if the subwoofer is set to "OFF" and any other speaker is set to "LARGE". RDS Sub-menu Features Setting RDS Options Function On Unit will display Radio Data System information when avail- able. Off Rating Sub-menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once setup, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup. Setting Password Rating Options Function _ _ _ _ Enter a 4-digit password to activate the "Rating" feature. 1. Kid Safe 2. G 3. PG 4. PG-13 Select the appropriate rating level for the intended audience. You may override higher ratings by using your password. 5. PG-R 6. R 7. NC-17 8. Adult Setting Load Factory Options Function Reset Select "Reset" to restore the factory default settings for the Rating system only. To reset the password, access the "RATING" menu and enter the current password. Once the correct password is entered, you can access the "Password" field and enter a new one. NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description. Hardware Sub-menu Features If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside unit. Setting Options Function Camera In TFT Auto Open Normal Mirror On Off Manual Video Input (Input circuitry autodetects the video signal from the Aux In source). NTSC PAL Auto The TFT panel automatically opens when the unit is turned on. You must press the OPEN button (1) to open the TFT panel. When the ignition is turned OFF, the TFT panel DOES NOT retract if it was previously out The color signals are output in the standard NTSC format. The color signals are output in the standard PAL format. The color signal output is switched automatically based on the current video input signal - NTSC or PAL. If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the VM9312 reverse driving stops, the monitor return to its original input mode. P.VOL Sub-menu Features Setting Source Level Options Function iPod Disc Radio SAT AUX IN1 AUX IN2 0-6 Choose a source for which you would like to increase the relative volume (LEVEL). Increase relative volume for specified source up to 6 decibbels. TS Cal (Screen Calibration) To access the "Screen Calibration" function from the SETUP menu, select the "TS CAL" option. After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed. Exiting the System Setup Menu To exit setup mode and resume normal playback, press the SETUP button (31) on the remote control or touch the BACK button on the screen. 14