Kenmore 7853 Installation Instructions
Kenmore 7853 - 30 in. Gas Manual
 |
View all Kenmore 7853 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenmore 7853 manual content summary:
- Kenmore 7853 | Installation Instructions - Page 1
's instructions. • If you cannot reach your gas supplier, call the fire department. -- Installation and service must be performed bya qualified installer, service agency or the gas supplier. OVERALL DIMENSIONS 253/4" Refer to your serial plate for applicable agency certification • ALL RANGES CAN - Kenmore 7853 | Installation Instructions - Page 2
excess spillage. Follow the cleaning instructions in the Use & Care Guide. • Unlike the standard gas range, THIS COOKTOP IS NOT REMOVABLE gas fitter. When using a flexible gas connector, it must not exceed 3 feet (.36 inches) in length. A "T" handle type manual gas valve must be instafled in the gas - Kenmore 7853 | Installation Instructions - Page 3
32" Masonry Drill Bit if installing in concrete) For gas supply connection: Pipe wrench For burner flame adjustment: Phillips head _ anti-tip brackets must also be moved and installed with the range. Instructions are provided for installation in wood or cement fastened to either - Kenmore 7853 | Installation Instructions - Page 4
the wall behind the range and in thefloor under the range after gas supply line is installed. the Floor Connection of Pipe Stub and Shut Off Valve. Edge Fig. 4a Manual Shutoff Valve Flare Union ! Flexible Flare Union Pressure Appliance Adaptor Regulator Conduit | Off Service Shut-Off Valve - Kenmore 7853 | Installation Instructions - Page 5
flare union adapter to external manual shut-off valve. e) Attach appliance conduit to flare union on shut-off valve. t) Make sure service shut-off valve on pressure regulator is in the "ON" position (See Fig. 4f). g) Check for leaks. Turn the gas supply on to the range and use a liquid leak detector - Kenmore 7853 | Installation Instructions - Page 6
the Burner Skirt with the Burner Head and Burner Cap. Each of the Burner Heads MUST have a Burner Cap installed to insure proper ignition and gas flame size. Note: The Burner Electrodes must be located properlyin slot of each Burner Head (See Fig. 2). Burner Assembly Grounding Type Wall Receptacle - Kenmore 7853 | Installation Instructions - Page 7
range has been connected to electric power. a, To check for proper lighting, push in and turn a surface burner knob counterclockwise to the LITE position. You will hear the igniter sparking (See Fig. 1). The surface burner should light when gas & Care Guide for operating instructions. b) Within - Kenmore 7853 | Installation Instructions - Page 8
range and check gas connections for leaks. See page 3, step 1 for proper anchoring instructions. Before You Call for Service Read the "Before You Call" and operating instructionsections in your Use & Care Guide flame). When ordering parts for or making inquires about your range, always be sure to
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
iNSTALLATiON
AND
SERVICE
MUST
BE
PERFORMED
BY
A QUALiFiED
iNSTALLER.
iMPORTANT:
SAVE
FOR
LOCAL
ELECTRICAL
iNSPECTOR'S
USE.
READ
AND
SAVE
THESE
iNSTRUCTiONS
FOR
FUTURE
REFERENCE.
If the
information
in
this
manual
is
not followed
exactly,
a
fire
or
explosion
may
result
causing
property
damage,
personal
injury
or death.
FOR
YOUR
SAFETY:
--
Do not
store
or use
gasoline
or
other
flammable
vapors
and
liquids
in
the vicinity
of this
or any other
appliance.
--
WHAT
TO DO
iF
YOU
SMELL
GAS:
•
Do not try
to light
any
appliance.
•
Do not touch
any electrical
switch;
do not use
any
phone
in
your
building.
•
Immediately
call
your
gas
supplier
from
a
neighbor's
phone.
Follow
the gas
supplier's
instructions.
•
If
you
cannot
reach
your
gas
supplier,
call
the
fire
department.
--
Installation
and service
must
be performed
bya
qualified
installer,
service
agency
or the
gas supplier.
OVERALL
DIMENSIONS
253/4"
'[
--
30"
Minimum
47-3/4"
Maximum
36 + 1/8"
t--.r--
*Minimum to
Side Wall
on Either
"5"-_
Side of
Range 5"
36"
_-
30._
Refer to your serial plate for
applicable agency certification
• ALL
RANGES
CAN
TiP
e iNJURY
TO PERSONS
COULD
RESULT
e iNSTALL
ANTI-TIP
DEVICE
PACKED
WiTH
RANGE
•
SEE
iNSTALLATiON
iNSTRUCTiONS
Note." For
appliances
installed
in the
State
of Massachusetts
see page
2.
FRONT
VIEW
Minimum to
,, Cabinets
on
Either Side
of Range.
14-13"_1
Maximum Depth
for Cabinets
Above Range Top.
.t----25"
_
i
i
ii
0" Clearance
Below
Cooking
Top
and
at
Rear
of Range.
Clearances
and
Dimensions
1.
Location--Check
location
where
the
range
will
be
installed.
Check for
proper
electrical
and
gas supply,
and
the stability
of the floor.
2.
Dimensions
that
are
shown
must
be
used.
Given
dimensions
provide
minimum
clearance.
Contact
surface
must
be solid
and
level.
Provide
Proper
Fuel
Type
Before
Proceeding:
Your
range is preset
to operate
on
natural
gas.
DO NOT attempt to convert this range to LP/
Propane settings without the proper LP/Propane
conversion
kit provided with the range or obtained from your dealer. Follow
all
instructions
provided with the LP Conversion
Kit.
pin 316259336revCEN
SP(0611)
EspaNol-
P_ginas
9-16