Kenwood DDX-512 Instruction Manual - Page 50

Hands Free Unit Control Calling by Voice Recognition Calls by recognizing the registered voice. ⁄ • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 52). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.) of Phonebook data, a key word voice must be registered. See (page 53). 1 Display the Voice Recognition screen 2 Utter the voice registered in the PhoneBook 1 2 Utter within 2 seconds after the Beep. 1 Displays the recognized phone number or address. 2 Cancels voice recognition. If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Make a call. ⁄ • If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep. For how to register key word, see (page 53). If there are more than one phone numbers registered under the same name, go to step 3. 3 Select a Phone number category 4 6 7 5 8 4 Calls the displayed phone number. 5 Creates an SMS to the displayed address. See (page 55). 6 Selects the Phone number category. 7 Scrolls the phone number. 8 Returns to the previous screen. 4 Make a call If the voice recognition is succeeded and there is only one phone number found: ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. 3 Make a call. 3 Displays the phonebook list. 50 DNX5120/DNX512EX/DDX512/DDX5032