Kenwood DDX374BT User Manual

Kenwood DDX374BT Manual

Get Kenwood DDX374BT PDF manuals and user guides View all Kenwood DDX374BT manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DDX374BT manual content summary:

  • Kenwood DDX374BT | User Manual - Page 1
    DDX374BT DDX340BT DDX24BT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best Kenwood dealer for information or service on the product. Model DDX374BT/DDX340BT/
  • Kenwood DDX374BT | User Manual - Page 2
    system settings 55 Setting menu items 57 REMOTE CONTROLLER 60 CONNECTION/INSTALLATION 62 REFERENCES 68 Maintenance 68 More information 68 Error message list 72 Troubleshooting 73 Specifications 75 How to read this manual: • Illustrations of DDX374BT are mainly used for explanation. The
  • Kenwood DDX374BT | User Manual - Page 3
    the instruction manual. The installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation desirable that it should be installed and operated keeping the inside the car... If you have parked the car for a long time
  • Kenwood DDX374BT | User Manual - Page 4
    setup When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also ) method of iPod/iPhone. Configure the settings to (Page 37) display the picture from the connected rear view camera.
  • Kenwood DDX374BT | User Manual - Page 5
    screen. Synchronizes the clock time with FM RBDS. Sets the clock manually. (See below.) When selecting : Adjust the hour (1), then adjust the minute (2). • Press [Reset] to set the minute to "00". • You can also display the setting screen by touching
  • Kenwood DDX374BT | User Manual - Page 6
    sudden increase of the output level. DDX374BT 5 CAM/DISP OFF button • Displays the picture from the connected camera. (Page 37) • Turns off on the monitor panel. (Page 53) DDX340BT/DDX24BT 1 Reset button/Power indicator/Security indicator • Resets the unit. (Page 3) • Lights up while the unit
  • Kenwood DDX374BT | User Manual - Page 7
    10): Display the pop-up short-cut menu by pressing MENU on the monitor panel, then select [Display OFF]. On the monitor panel (only for DDX374BT): (Hold) To turn on the screen: Press and the hold the same 2 button, or touch the display. Turn to the right to increase, and turn
  • Kenwood DDX374BT | User Manual - Page 8
    BASICS Common screen operations ❏ Common screen descriptions You can display other screens at any time to change the source, show the information, or change the settings, etc. Source control screen Performs source playback operations. • The operation buttons and information displayed vary depending
  • Kenwood DDX374BT | User Manual - Page 9
    component connected to the iPod/AV-IN input terminal. (Page 39) [SiriusXM]*2 Switches standby. (Page 7) [APPs] Switches to the App screen from the connected Bluetooth audio player. (Page 46) *1 Selectable only when is set to [USB 1 Wire]. (Page 20) *2 Only for DDX374BT/DDX24BT
  • Kenwood DDX374BT | User Manual - Page 10
    short-cut menu. 1 Display the pop-up short-cut menu. DDX374BT [Screen Displays the picture adjustment Adjustment] screen. (Page 52) [Display OFF] Turns off the screen. (Page 7) [Camera] Displays the picture from the connected camera. (Page 37) [SETUP] Displays the screen. (Page 57
  • Kenwood DDX374BT | User Manual - Page 11
    DISCS Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types/file types, see page 69. ❏ Inserting a disc Insert a disc with the label side facing up. The source changes to "DISC" and
  • Kenwood DDX374BT | User Manual - Page 12
    DISCS Operation buttons • Available buttons on the screen and operations differ depending on the type of disc/file being played back. [ ] Displays the other operation button window. • To hide the window, press [ ]. [ ] Displays the screen. (Page 49) [ ] Displays the folder/track
  • Kenwood DDX374BT | User Manual - Page 13
    DISCS ❏ Selecting a folder/track on the list 1 2 Select the folder (1), then the item in the selected folder (2). • Repeat the procedure until you select the desired track. • You can change the page to display more items by pressing [ ]/[ ]. • Press [ ] to return to the root folder. • Press [ ] to
  • Kenwood DDX374BT | User Manual - Page 14
    DISCS For VCD [ MENU] [Audio] [Direct] [Return] [ZOOM] [Aspect] [PictureAdjust] Displays the disc menu. Selects the audio channel (ST: stereo, L: left, R: right). Displays/hides the direct selection buttons. (See the right column.) Displays the previous screen or menu. Displays the picture size
  • Kenwood DDX374BT | User Manual - Page 15
    initial audio language. Language> (Initial: English) (Page 71) You can change the dynamic range while playing using Dolby Digital software. • Wide: Select this to enjoy a powerful sound at a low volume level with its full dynamic range. • Normal: Select this to reduce the
  • Kenwood DDX374BT | User Manual - Page 16
    Audio Player etc. to the unit. • For details about connecting USB devices, see page 65. • You cannot connect a computer or portable HDD to the USB input terminal. • For playable file types and notes on using USB devices, see page 70. When a USB device is connected... The source changes to "USB" and
  • Kenwood DDX374BT | User Manual - Page 17
    USB ❏ Settings for USB playback- 1 2 * Select the playback file type when a disc contains different types of files. • Audio: Plays back audio files. • Still Image: Plays back picture files. • Video: Plays back video files. • Audio&Video (initial): Plays back audio files and
  • Kenwood DDX374BT | User Manual - Page 18
    ] to install KENWOOD MUSIC PLAY APP" is shown on the Android device. Follow the instructions to install the application. You can also install the latest version of the KENWOOD Music Play application on your Android device before connecting. About KENWOOD Music Play • This unit supports the Android
  • Kenwood DDX374BT | User Manual - Page 19
    . • Press [ ] to return to the upper layer. Shows/hides artwork of the Android device. • BROWSE MODE: Controls from the unit (using the KENWOOD Music Play application). • HAND MODE: Controls other media player applications from the Android device (without using the
  • Kenwood DDX374BT | User Manual - Page 20
    ❏ Selecting the connection method of iPod/iPhone 1 Putting the unit in standby. (Page 7) 2 Display the setting screen. On the Home screen: 3 [USB 1 Wire] [USB+AV-IN] Select this when the iPod/ iPhone is connected using KCA-iP102 or KCA-iP103 (optional accessory). Select this when the iPod
  • Kenwood DDX374BT | User Manual - Page 21
    iPod/iPhone Operation buttons [ ] Displays the other operation button window. • To hide the window, press [ ]. [ ] Displays the screen. (Page 49) [ ] Displays the audio/video file list. (See the right column.) [S] [T] • Selects a track. (Press) • Reverse/forward search. (Hold)
  • Kenwood DDX374BT | User Manual - Page 22
    touch/ iPhone/Android/BlackBerry on this unit. • For Apps you can use on this unit, visit . Preparation 1 Connect the iPod touch/iPhone/Android/ BlackBerry. • For Android/BlackBerry: Connect the Android/BlackBerry device via Bluetooth. (Page 40) • For iPod touch/iPhone
  • Kenwood DDX374BT | User Manual - Page 23
    iPod touch/iPhone, Android or BlackBerry devices. • Install the latest version of the Pandora application on your iPod touch/iPhone/Android/ BlackBerry. Preparation 1 Connect the device. • For Android/BlackBerry: Connect the Android/BlackBerry device via Bluetooth. (Page 40) • For iPod touch/iPhone
  • Kenwood DDX374BT | User Manual - Page 24
    App Store to find and install the most recent version.) • Connect iPod touch/iPhone to this unit with KCA-iP202, KCA-iP102 or KCA-iP103 (optional accessory). Android™ • Visit Google play and search for "Pandora" to install. • Bluetooth must be built in and the following profiles must be supported
  • Kenwood DDX374BT | User Manual - Page 25
    from iPod touch/ iPhone, Android or BlackBerry devices. • Install the latest version of the iHeartRadio application on your iPod touch/iPhone/Android/ BlackBerry. Playback operations You can operate iHeartRadio using the remote controller*1. Only playing, pausing, and skipping are available
  • Kenwood DDX374BT | User Manual - Page 26
    iHeartRadio for Auto" in the Apple iTunes App Store to find and install the most recent version.) • Connect iPod for Auto" to install. • Bluetooth must be built in and the following profiles must be supported. - SPP impaired or some or all of the services may become unavailable. • Some functions of
  • Kenwood DDX374BT | User Manual - Page 27
    Android or BlackBerry devices. • Install the latest version of the operate Spotify using the remote controller*1. Only playing, 20) 2 Select the device to use on the screen. (Page 48) 3 Select "Spotify" and Android/BlackBerry device connected via Bluetooth. Changes the page of the
  • Kenwood DDX374BT | User Manual - Page 28
    App Store to find and install the most recent version.) • Connect iPod touch/iPhone to this unit with KCA-iP202, KCA-iP102 or KCA-iP103 (optional accessory). Android™ • Visit Google Play™ and search for "Spotify" to install. • Bluetooth must be built in and the following profiles must be supported
  • Kenwood DDX374BT | User Manual - Page 29
    search mode. (Page 30) Changes the seek mode. • AUTO1: Auto Search • AUTO2: Tunes in stations in the memory one after another. • MANU: Manual Search Searches for a station. • The search method differs according to the selected seek mode. (See above.) Presets stations automatically. (Hold) (See the
  • Kenwood DDX374BT | User Manual - Page 30
    RADIO ❏ Selecting a preset station 1 Select the band (1), then display the preset station window (2). FM RBDS features ❏ Searching for FM RBDS programs-PTY Search You can search for your favorite programs being broadcast by selecting the PTY code. 1 ❏ Activating/deactivating TI Standby Reception
  • Kenwood DDX374BT | User Manual - Page 31
    SiriusXM® Satellite Radio (Only for DDX374BT/DDX24BT) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A
  • Kenwood DDX374BT | User Manual - Page 32
    SiriusXM® Satellite Radio Operation buttons [SXM1] - Selects the band. [SXM4] [ ] Displays the other operation button window. • To hide the window, press [ ]. [Song Title]/ Changes the displayed information [Info]/ each time this button is pressed. [Category] [ ] Displays the preset
  • Kenwood DDX374BT | User Manual - Page 33
    time bar Shows the remaining capacity (gray) and the amount of buffered content (blue). If the Replay buffer is full, the entire bar becomes blue. • Updated every second. 3 Time code Shows you the point in the Replay buffer you are listening to. • Example: -5:00 - You are listening to audio that is
  • Kenwood DDX374BT | User Manual - Page 34
    SiriusXM® Satellite Radio SmartFavorites User stored channels (P1 to P5) of current band are recognized as SmartFavorites channels. SiriusXM Connect Vehicle Tuner automatically buffers their broadcast content in the background. When you select a SmartFavorite channel, you can rewind and replay up
  • Kenwood DDX374BT | User Manual - Page 35
    SiriusXM® Satellite Radio Setting reception restrictions ❏ Setting the parental control You can limit access to SiriusXM channels, such as those with mature content. Setting/Changing the parental code • The initial setting is "0000." • Changing the code does not change the /<
  • Kenwood DDX374BT | User Manual - Page 36
    for all skipped channels: Press and hold [All Clear ] in on the screen. ❏ Resetting the SiriusXM Satellite Radio settings You can reset the SiriusXM Satellite Radio settings you set up and restore the default settings. 1 Display the screen
  • Kenwood DDX374BT | User Manual - Page 37
    the picture from the connected camera manually On the pop-up short-cut menu (Page 10): Display the pop-up short-cut menu by pressing MENU on the monitor panel, then select [Camera]. On the monitor panel: DDX374BT DDX340BT/DDX24BT (Hold) On the monitor panel: DDX374BT To adjust the picture While
  • Kenwood DDX374BT | User Manual - Page 38
    according to the size of the car, parking space and so on. • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. • When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. Make
  • Kenwood DDX374BT | User Manual - Page 39
    ]. Be sure to select [USB 1 Wire] for beforehand. (Page 20) 1 Connect an external component to the iPod/AV-IN input terminal. (Page 66) 2 Select "AV for DDX374BT) You can control the sources from the component via ADS adapter. Preparation: Configure the settings on the
  • Kenwood DDX374BT | User Manual - Page 40
    a PIN code both on the device and unit for pairing. • Once the connection is established, it is registered in the unit even if you reset the unit. Up to 10 devices can be registered in total. • Two devices for Bluetooth phone and one for Bluetooth audio can be connected at a time. • To use the
  • Kenwood DDX374BT | User Manual - Page 41
    BLUETOOTH Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0) 1 Display the screen. On the Home screen: 2 Change the PIN code. • If you wish to skip changing the PIN code, go to step 3. • The PIN code
  • Kenwood DDX374BT | User Manual - Page 42
    for the target (1), then display the screen (2). • When a Bluetooth mobile phone is connected, the signal Bluetooth Setup> screen. (Page 41) 2 3 Select the device you want to connect (1), then press [Connection] (2). : Mobile phone : Audio device : Device for using Apps
  • Kenwood DDX374BT | User Manual - Page 43
    a Bluetooth mobile phone ❏ Receiving a call When a call comes in... ❏ Ending a call While talking... ❏ Switching between handsfree mode and phone mode While talking... • Call information is displayed if acquired. • Phone operation is not available while the picture from the connected camera is
  • Kenwood DDX374BT | User Manual - Page 44
    history/phone book/preset list 1 ❏ Switching between two connected devices When 2 devices are connected, you can change the device to use. While using a Bluetooth mobile phone, select the device you want to use. • The active device is highlighted. • You can also display the phone control screen by
  • Kenwood DDX374BT | User Manual - Page 45
    BLUETOOTH • To use the A to Z search in the phone book: 1 • To display other phone numbers: When the phone book list is displayed, you can switch between
  • Kenwood DDX374BT | User Manual - Page 46
    . 4 Select a preset number to store into. (Hold) • To display the preset list, press [ ] on the phone control screen. (Page 44) Using the Bluetooth audio player • To register a new device, see page 40. • To connect/disconnect a device, see page 42. ❏ Indications and buttons on the source control
  • Kenwood DDX374BT | User Manual - Page 47
    The unit does not answer the calls automatically. Answer the calls manually. • ON (Initial): Establishes pairing automatically with the connected iOS device (such as iPhone) even if the Bluetooth function is deactivated on the device. (Auto pairing may not work for some devices depending on the iOS
  • Kenwood DDX374BT | User Manual - Page 48
    65) - Select the connection method of iPod touch/ iPhone on . (Page 20) 1 Display the screen. On the Home screen: 3 When selecting [Android/Other (Bluetooth)] as the device type: Select the Android/BlackBerry device (1), then press [OK] to connect (2). • If [Enter] for
  • Kenwood DDX374BT | User Manual - Page 49
    SETTINGS Sound adjustment ❏ Using the sound equalization • The adjustments are memorized for each source until you adjust the sound again. If the source is a disc, the adjustments are stored for each of the following categories. - DVD/VCD - CD - MPEG1/MPEG2/MP3/WMA/WAV/AAC • You cannot adjust the
  • Kenwood DDX374BT | User Manual - Page 50
    SETTINGS ❏ Setting the speakers-car type, speaker size and crossover frequency 1 Display the screen. On the Home screen: 2 Select a car type (1), select the location of the speakers (2), then display the screen (3). 3 Select the speaker type (1), select the size of
  • Kenwood DDX374BT | User Manual - Page 51
    SETTINGS ❏ Adjusting the Digital Time Alignment (DTA) Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your vehicle. 1 Display the screen. On the Home screen: 3 Select an item to make an adjustment. [Distance] [Gain] Adjusts
  • Kenwood DDX374BT | User Manual - Page 52
    SETTINGS Adjustment for video playback ❏ Adjusting the picture You can adjust the picture quality. 1 Display the picture adjustment screen. On the source control screen: Adjusts the brightness. (−15 to +15) Adjusts the contrast. (−10 to +10) Adjusts the blackness.
  • Kenwood DDX374BT | User Manual - Page 53
    an item to change (background design: [Background]/panel color: [Panel Color]*1). • Selecting [Scan] changes the illumination color gradually. *1 Only for DDX374BT. *2 Store your own scene beforehand. (Page 54) *3 Store your own color adjustment beforehand. (Page 54) • The zoom function cannot be
  • Kenwood DDX374BT | User Manual - Page 54
    the new one.) • Press [No] to return to the previous screen. * Not displayed when playing an external component connected to the iPod/AV-IN input terminal. 54 2 Select the position to place the icon (1), then select the item you want to display in the selected position (2). Repeat this step to
  • Kenwood DDX374BT | User Manual - Page 55
    memorized settings any time. • The memorized settings are kept even when the unit is reset. 1 Display the screen. On the Home screen: • Press [ [Yes]. ❏ Updating the system You can update the system by connecting a USB device containing an update file. • To update the system, visit
  • Kenwood DDX374BT | User Manual - Page 56
    application. It may take a while. If the update has been completed successfully, "Update Completed" appears. Reset the unit. • Do not disconnect the USB device while updating. • If the update has failed, turn the power off and then on, and retry the update. • Even if you have turned off the power
  • Kenwood DDX374BT | User Manual - Page 57
    (Page 10). • You cannot change the settings screen in the following situations: - When the unit is in standby (Page 7) - When the Bluetooth phone is used (making or receiving a call, during a call, or while voice dialing) ❏ setting screen Change the sound mode or adjust
  • Kenwood DDX374BT | User Manual - Page 58
    Input> setting screen Configure the rear view camera settings. • Rear Camera Interruption(Page 37): - ON: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. - OFF (Initial): Select this when no camera is connected • Parking Parking
  • Kenwood DDX374BT | User Manual - Page 59
    (Page 20) Configure the App settings. (Page 48) Configure settings for using a Bluetooth device, such as 56) Displays the version information of the software. You can update the software. (Page 55) Shows the Open
  • Kenwood DDX374BT | User Manual - Page 60
    instruction manual that comes with the remote controller. V Caution: • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result if the Remote consult a physician. ❏ Battery installation Use two "AAA"/"R03"-size batteries
  • Kenwood DDX374BT | User Manual - Page 61
    REMOTE CONTROLLER ❏ DVD/VCD (DVD mode) J/K/H/I Moves the cursor when displaying a menu. S/T to search for in direct search. Enters direct search mode. (See the right column.) * Only for DDX374BT/DDX24BT. ❏ iPod/Android (AUD mode) S/T Selects music/videos. I/W Starts/pauses playback. ❏ USB (
  • Kenwood DDX374BT | User Manual - Page 62
    wires via the fuse. V Precautions on installation and connection • Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring is installed, check whether the brake lamps for installation 1 Wiring harness x 1 2 Trim plate x 1 3 Extension wire (2
  • Kenwood DDX374BT | User Manual - Page 63
    input and output wire 2 connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness wires in the following order: ground, battery, ignition. 5 Connect the wiring harness connector to the unit. 6 Install the reset button. (Page 3) ❏ Installing the
  • Kenwood DDX374BT | User Manual - Page 64
    wire) White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect to the vehicle's parking 3 brake detection switch harness. • For best
  • Kenwood DDX374BT | User Manual - Page 65
    CONNECTION/INSTALLATION ❏ Connecting a USB device USB device* (commercially available) ❏ Connecting an Android device Android device (commercially available) 1.0 m USB 2.0 cable (commercially available) 1.0 m * Use CA-U1EX for extending the
  • Kenwood DDX374BT | User Manual - Page 66
    output (Red) 8 Rear view camera input (Yellow) *1 Only for DDX374BT/DDX24BT. *2 Only for DDX374BT. *3 When connecting the component to wire to the chassis of the car; otherwise the unit may be damaged. ❏ Connecting microphone for Bluetooth Connect the microphone (7) to the MIC terminal. • To install
  • Kenwood DDX374BT | User Manual - Page 67
    CONNECTION/INSTALLATION Removing the unit ❏ Removing the trim plate 1 Engage the catch pins on the extraction key (4) and remove the two locks on the lower part. Lower
  • Kenwood DDX374BT | User Manual - Page 68
    REFERENCES Maintenance ❏ Caution on cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. ❏ Moisture condensation Moisture may
  • Kenwood DDX374BT | User Manual - Page 69
    REFERENCES Playing audio files (MP3/WMA/WAV/AAC) • This unit can play back files with the extension code , , or (regardless of the letter case-upper/lower). • This unit can play back files that meet the conditions below: - Bit rate: MP3: 8 kbps - 320 kbps WMA: 5 kbps - 320
  • Kenwood DDX374BT | User Manual - Page 70
    shown on the screen. • Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device. • Operation and power supply may not work as intended for some USB devices. • Do not leave a USB device in
  • Kenwood DDX374BT | User Manual - Page 71
    visit the following KENWOOD web site:
  • Kenwood DDX374BT | User Manual - Page 72
    has shorted or it has come into contact with the car chassis. Wire or insulate the speaker cord as appropriate, then reset the unit. (Pages 3 and 64) "Parking off": • No playback picture is shown when the parking brake is not engaged. "Authorization Error": • Check whether the connected iPod/iPhone
  • Kenwood DDX374BT | User Manual - Page 73
    Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions does not work at all. • Reset the unit. (Page 3) The remote controller* does not work. • Replace
  • Kenwood DDX374BT | User Manual - Page 74
    KENWOOD Music Play APP is installed on the Android device. • Reconnect the Android device and select the appropriate control mode. • If this does not solve the problem, the connected Android device does not support Update the firmware version. • Charge the battery. • Reset Store stations manually. (
  • Kenwood DDX374BT | User Manual - Page 75
    whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). The Bluetooth device does not detect the unit. • Search from the Bluetooth device again. The unit does not pair with the Bluetooth device. • For devices compatible with Bluetooth 2.1: Register the device using
  • Kenwood DDX374BT | User Manual - Page 76
    Decoder MP3/WMA/AAC/WAV Video Decoder MPEG1/MPEG2/JPEG ❏ Bluetooth section Technology Frequency Bluetooth 3.0 2.402 GHz to 2.480 GHz Output Power +4 dBm (Audio/Video Remote Control Profile) 1.5 GAP (Generic Access Profile) PBAP (Phonebook Access Profile) 1.2 SDP (Service Discovery Profile)
  • Kenwood DDX374BT | User Manual - Page 77
    (at less than 1%THD) Preout Level DDX374BT: 4 V/10 kΩ DDX340BT/DDX24BT: 2.5 V/10 kΩ Preout Impedance ≤ 600 Ω Speaker Impedance 4 Ω to 8 Ω ❏ General Operating Voltage 14.4 V (10.5 V to 16 V allowable) Maximum Current Consumption 10 A Installation Dimensions (W × H × D) 182 mm × 111 mm × 160
  • Kenwood DDX374BT | User Manual - Page 78
    and countries around the world. Used under license from Research In Motion Limited. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their
  • Kenwood DDX374BT | User Manual - Page 79
  • Kenwood DDX374BT | User Manual - Page 80
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DDX374BT/DDX340BT/DDX24BT
Serial number
US Residents Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
B5A-1362-00 (KN)
© 2016 JVC KENWOOD Corporation
DDX374BT
DDX340BT
DDX24BT
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL