Kenwood DDX375BT User Manual

Kenwood DDX375BT Manual

Get Kenwood DDX375BT PDF manuals and user guides View all Kenwood DDX375BT manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DDX375BT manual content summary:

  • Kenwood DDX375BT | User Manual - Page 1
    DDX374BT DDX340BT DDX24BT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver. For your records Record the serial number, found
  • Kenwood DDX375BT | User Manual - Page 2
    the Home screen 54 Customizing the system settings 55 Setting menu items 57 REMOTE CONTROLLER 60 CONNECTION/INSTALLATION 62 REFERENCES 68 Maintenance 68 More information 68 Error message list 72 Troubleshooting 73 Specifications 75 How to read this manual: • Illustrations of DDX374BT are
  • Kenwood DDX375BT | User Manual - Page 3
    in the instruction manual. The Connect the equipment into an outlet on a circuit different from that to which the receiver is connected is desirable that it should be installed and operated keeping the radiator reset your unit If the unit fails to operate properly, press the reset button. ENGLISH 3
  • Kenwood DDX375BT | User Manual - Page 4
    the first time or reset the unit, the initial buttons and menu items in the selected language ([Local]) or English ([English]). Select the connection (Page 20) method of iPod/iPhone.
  • Kenwood DDX375BT | User Manual - Page 5
    screen. Synchronizes the clock time with FM RBDS. Sets the clock manually. (See below.) When selecting : Adjust the hour (1), then adjust the minute (2). • Press [Reset] to set the minute to "00". • You can also display the setting screen by touching
  • Kenwood DDX375BT | User Manual - Page 6
    DISP OFF button • Displays the picture from the connected camera. (Page 37) • Turns off the screen. (Hold) (Page 7) 6 TEL/VOICE button • change the color of the buttons on the monitor panel. (Page 53) DDX340BT/DDX24BT 1 Reset button/Power indicator/Security indicator • Resets the unit. (Page 3)
  • Kenwood DDX375BT | User Manual - Page 7
    (only for DDX374BT): (Hold) To turn on the screen: Press and the hold the same 2 button, or touch the display. Turn to the right to increase, and turn to the left to decrease. DDX340BT/DDX24BT Press J to increase, and press K to decrease. • Holding J Increases the volume continuously to level
  • Kenwood DDX375BT | User Manual - Page 8
    to change the source, show the information, or change the settings, etc. Source control screen Performs source playback operations. • The operation buttons and information displayed vary depending on the selected source. 1 Home screen Displays the source control screen and settings screen. • You
  • Kenwood DDX375BT | User Manual - Page 9
    buttons disappear connected via ADS adapter. (Page 39) [STANDBY] Puts the unit in standby. (Page 7) [APPs] Switches to the App screen from the connected Bluetooth audio player. (Page 46) *1 Selectable only when is set to [USB 1 Wire]. (Page 20) *2 Only for DDX374BT/DDX24BT
  • Kenwood DDX375BT | User Manual - Page 10
    short-cut buttons ❏ Using short-cut source selection buttons While displaying the source control screen, you can use the short-cut buttons to go To hide the short-cut buttons ❏ Using the pop-up off the screen. (Page 7) [Camera] Displays the picture from the connected camera. (Page 37) [SETUP]
  • Kenwood DDX375BT | User Manual - Page 11
    the loading slot to protect it from dust. To eject a disc forcibly Press and hold M on the monitor panel. Playback operations When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 52. ❏ Indications
  • Kenwood DDX375BT | User Manual - Page 12
    IN indicator 5 Playback status 6 Playback mode (Page 14) 7 File type 8 Current playback item information (folder no./file no./track no.) Operation buttons • Available buttons on the screen and operations differ depending on the type of disc/file being played back. [ ] Displays the other operation
  • Kenwood DDX375BT | User Manual - Page 13
    ratio. (Page 52) Displays the picture adjustment screen. (Page 52) Selects the audio type. Selects the subtitle type. Selects the view angle. • Available buttons on the screen and operations differ depending on the type of disc/file being played back. Continued on the next page... ENGLISH 13
  • Kenwood DDX375BT | User Manual - Page 14
    of disc/file being played back. • You cannot activate the repeat mode and the random mode at the same time. • Each time you press the button, the playback mode changes. (The corresponding indicator lights up.) - Available items differ depending on the type of disc/file being played back. C-REP
  • Kenwood DDX375BT | User Manual - Page 15
    the signals reproduced through the front and/or rear speakers. • Dolby Surround: Select this to enjoy multi-channel surround sound by connecting an amplifier compatible with Dolby Surround. • Stereo (initial): Normally select this. Select the monitor type to watch a wide screen
  • Kenwood DDX375BT | User Manual - Page 16
    and notes on using USB devices, see page 70. When a USB device is connected... The source changes to "USB" and playback starts. • All tracks in the USB device after "No Device" appears. Playback operations When the operation buttons are not displayed on the screen, touch the area shown on the
  • Kenwood DDX375BT | User Manual - Page 17
    a wide screen picture on the external monitor. 16:9 (Initial) 4:3 LB 4:3 PS Switches between internal memory and the memory source of the connected device (such as mobile phone). Press [Next]. * For playable files, see page 70. If the USB device contains no files of the selected
  • Kenwood DDX375BT | User Manual - Page 18
    ] to install KENWOOD MUSIC PLAY APP" is shown on the Android device. Follow the instructions to install the application. You can also install the latest version of the KENWOOD Music Play application on your Android device before connecting. About KENWOOD Music Play • This unit supports the Android
  • Kenwood DDX375BT | User Manual - Page 19
    . • Press [ ] to return to the upper layer. Shows/hides artwork of the Android device. • BROWSE MODE: Controls from the unit (using the KENWOOD Music Play application). • HAND MODE: Controls other media player applications from the Android device (without using the
  • Kenwood DDX375BT | User Manual - Page 20
    the Home screen: 3 [USB 1 Wire] [USB+AV-IN] Select this when the iPod/ iPhone is connected using KCA-iP102 or KCA-iP103 (optional accessory). Select this when the iPod/ iPhone is connected using KCA-iP202 (optional accessory). Playback operations When the operation buttons are not displayed on
  • Kenwood DDX375BT | User Manual - Page 21
    the same as Repeat All. • : Cancels the repeat mode. • To display all available operation buttons, press [ ] to display the other operation button window. * To cancel random mode, press the button repeatedly until the indicator disappears. ❏ Selecting an audio/video file from the menu 1 2 Select
  • Kenwood DDX375BT | User Manual - Page 22
    Switches the device between iPod touch/iPhone connected with a cable and Android/BlackBerry device connected via Bluetooth. • To display all available operation buttons, press [ ] to display the other operation button window. • You can operate some functions of the App on the touch panel. • You can
  • Kenwood DDX375BT | User Manual - Page 23
    iPod touch/iPhone, Android or BlackBerry devices. • Install the latest version of the Pandora application on your iPod touch/iPhone/Android/ BlackBerry. Preparation 1 Connect the device. • For Android/BlackBerry: Connect the Android/BlackBerry device via Bluetooth. (Page 40) • For iPod touch/iPhone
  • Kenwood DDX375BT | User Manual - Page 24
    App Store to find and install the most recent version.) • Connect iPod touch/iPhone to this unit with KCA-iP202, KCA-iP102 or KCA-iP103 (optional accessory). Android™ • Visit Google play and search for "Pandora" to install. • Bluetooth must be built in and the following profiles must be supported
  • Kenwood DDX375BT | User Manual - Page 25
    and Android/BlackBerry device connected via Bluetooth. • To display all available operation buttons, press [ ] to display the other operation button window. *1 Purchase KNA-RCDV331 separately. *2 Appears only for the live station screen. *3 Appears only for the custom station screen. ENGLISH 25
  • Kenwood DDX375BT | User Manual - Page 26
    Connect iPod touch/iPhone to this unit with KCA-iP202, KCA-iP102 or KCA-iP103 (optional accessory). Android™ • Visit Google play and search for "iHeartRadio for Auto" to install. • Bluetooth must be built in and the following profiles must be supported or all of the services may become unavailable.
  • Kenwood DDX375BT | User Manual - Page 27
    can operate Spotify using the remote controller*1. Only playing, pausing, and skipping are available. ❏ Indications and buttons on the source control screen 1 2 Preparation 1 Connect the device. • For Android/BlackBerry: Connect the Android/BlackBerry device via Bluetooth. (Page 40) • For iPod
  • Kenwood DDX375BT | User Manual - Page 28
    App Store to find and install the most recent version.) • Connect iPod touch/iPhone to this unit with KCA-iP202, KCA-iP102 or KCA-iP103 (optional accessory). Android™ • Visit Google Play™ and search for "Spotify" to install. • Bluetooth must be built in and the following profiles must be supported
  • Kenwood DDX375BT | User Manual - Page 29
    button window. * Appears only when FM is selected as the source. Presetting stations ❏ Storing stations in the memory You can preset 5 stations for each band. Automatic presetting-AME (Auto Memory) (Hold) The local stations with the strongest signals are found and stored automatically. Manual
  • Kenwood DDX375BT | User Manual - Page 30
    RADIO ❏ Selecting a preset station 1 Select the band (1), then display the preset station window (2). FM RBDS features ❏ Searching for FM RBDS programs-PTY Search You can search for your favorite programs being broadcast by selecting the PTY code. 1 ❏ Activating/deactivating TI Standby Reception
  • Kenwood DDX375BT | User Manual - Page 31
    the SiriusXM Connect Vehicle Tuner using one of the two methods below: • For users in the U.S.A: - Online: Visit www.siriusxm.com/activatenow - Phone: Call SiriusXM Listener Care at 1-866-635-2349 • For users in Canada: - Online: Visit www.siriusxm.ca/activatexm - Phone: Call XM customer Care at
  • Kenwood DDX375BT | User Manual - Page 32
    for SiriusXM Satellite Radio reception on the screen. (Pages 34-36) • To display all available operation buttons, press [ ] to display the other operation button window. Presetting channels ❏ Storing channels in the memory You can preset 5 channels for each band. 1 Tune in to
  • Kenwood DDX375BT | User Manual - Page 33
    currently tuned channel. • The SiriusXM Connect Vehicle Tuner continually buffers up to 60 [All Channels]. • Pressing the info change button above the list displays information in the following buffer is full, the entire bar becomes blue. • Updated every second. 3 Time code Shows you the point in
  • Kenwood DDX375BT | User Manual - Page 34
    Radio SmartFavorites User stored channels (P1 to P5) of current band are recognized as SmartFavorites channels. SiriusXM Connect Vehicle Tuner automatically buffers their broadcast content in the background. When you select a SmartFavorite channel, you can rewind and replay up to 30 minutes of any
  • Kenwood DDX375BT | User Manual - Page 35
    SiriusXM® Satellite Radio Setting reception restrictions ❏ Setting the parental control You can limit access to SiriusXM channels, such as those with mature content. Setting/Changing the parental code • The initial setting is "0000." • Changing the code does not change the /<
  • Kenwood DDX375BT | User Manual - Page 36
    for all skipped channels: Press and hold [All Clear ] in on the screen. ❏ Resetting the SiriusXM Satellite Radio settings You can reset the SiriusXM Satellite Radio settings you set up and restore the default settings. 1 Display the screen
  • Kenwood DDX375BT | User Manual - Page 37
    the screen. To display the picture from the connected camera manually On the pop-up short-cut menu (Page 10): Display the pop-up short-cut menu by pressing MENU on the monitor panel, then select [Camera]. On the monitor panel: DDX374BT DDX340BT/DDX24BT (Hold) On the monitor panel: DDX374BT To
  • Kenwood DDX375BT | User Manual - Page 38
    the parking guidelines according to the size of the car, parking space and so on. • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. • When adjusting the parking guidelines, make sure to use the parking brake to prevent the
  • Kenwood DDX375BT | User Manual - Page 39
    external audio/video players-AV-IN When the operation buttons are not displayed on the screen, touch the area iPod Setup> is set to [USB+AV-IN]. Be sure to select [USB 1 Wire] for beforehand. (Page 20) 1 Connect an external component to the iPod/AV-IN input terminal. (Page 66) 2 Select
  • Kenwood DDX375BT | User Manual - Page 40
    , it is registered in the unit even if you reset the unit. Up to 10 devices can be registered in total. • Two devices for Bluetooth phone and one for Bluetooth audio can be connected at a time. • To use the Bluetooth function, you need to turn on the Bluetooth function of the device. • To use the
  • Kenwood DDX375BT | User Manual - Page 41
    pairing is complete, the device is listed on the . • To use the paired device, connect the device on the . (Page 42) • You can also display the screen by pressing [ ] on the phone control screen. (Page 44) • Press [Clear] to delete the
  • Kenwood DDX375BT | User Manual - Page 42
    1 Display the screen. (Page 41) 2 3 Select the device you want to connect (1), then press [Connection] (2). : Mobile phone : Audio device : Device for using Apps • The status is shown as follows: - "Connecting": Connection is in progress. - "Connected": A connection has been
  • Kenwood DDX375BT | User Manual - Page 43
    . • Phone operation is not available while the picture from the connected camera is displayed. (Page 37) To reject a call ❏ Adjusting the volume of calls/earpiece/ microphone While talking... Each time you press the button, the talking method is switched ( : handsfree mode / : phone mode
  • Kenwood DDX375BT | User Manual - Page 44
    phone book are not displayed. From the call history/phone book/preset list 1 ❏ Switching between two connected devices When 2 devices are connected, you can change the device to use. While using a Bluetooth mobile phone, select the device you want to use. • The active device is highlighted. • You
  • Kenwood DDX375BT | User Manual - Page 45
    BLUETOOTH • To use the A to Z search in the phone book: 1 • To display 2 Select a phone number to call. Direct number entry You can enter up to 31 numbers. • When iPhone is connected, Siri is activated. • You can also activate voice dialing by holding TEL/VOICE on the monitor panel. 2 Say the
  • Kenwood DDX375BT | User Manual - Page 46
    is acquired from the device.) 3 Playing time*1 4 Playback status*1 5 Connected device name • Pressing the button switches to the other Bluetooth audio device. Operation buttons [ ] Displays the other operation button window. • To hide the window, press [ ]. [ ] Displays the
  • Kenwood DDX375BT | User Manual - Page 47
    . • OFF (Initial): The unit does not answer the calls automatically. Answer the calls manually. • ON (Initial): Establishes pairing automatically with the connected iOS device (such as iPhone) even if the Bluetooth function is deactivated on the device. (Auto pairing may not work for some devices
  • Kenwood DDX375BT | User Manual - Page 48
    / iPhone on . (Page 20) 1 Display the screen. On the Home screen: 3 When selecting [Android/Other (Bluetooth)] as the device type: Select the Android/BlackBerry device (1), then press [OK] to connect (2). • If [Enter] for cannot be selected, put the unit in
  • Kenwood DDX375BT | User Manual - Page 49
    SETTINGS Sound adjustment ❏ Using the sound equalization • The adjustments are memorized for each source until you adjust the sound again. If the source is a disc, the adjustments are stored for each of the following categories. - DVD/VCD - CD - MPEG1/MPEG2/MP3/WMA/WAV/AAC • You cannot adjust the
  • Kenwood DDX375BT | User Manual - Page 50
    3 Select the speaker type (1), select the size of the selected speaker (2), then display the
  • Kenwood DDX375BT | User Manual - Page 51
    SETTINGS ❏ Adjusting the Digital Time Alignment (DTA) Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your vehicle. 1 Display the screen. On the Home screen: 3 Select an item to make an adjustment. [Distance] [Gain] Adjusts
  • Kenwood DDX375BT | User Manual - Page 52
    SETTINGS Adjustment for video playback ❏ Adjusting the picture You can adjust the picture quality. 1 Display the picture adjustment screen. On the source control screen: Adjusts the brightness. (−15 to +15) Adjusts the contrast. (−10 to +10) Adjusts the blackness.
  • Kenwood DDX375BT | User Manual - Page 53
    the source control screen: Changing the display design You can change the background and panel color. 1 Display the screen. On the Home screen: 3 Select a background/panel color. To select a background *2 To select a panel color *3 2 Change the magnification (1), then move the
  • Kenwood DDX375BT | User Manual - Page 54
    Customize> screen. On the Home screen: • Press [ ] repeatedly to change the page on the menu screen. ❏ Storing your own scene for the background to the previous screen. * Not displayed when playing an external component connected to the iPod/AV-IN input terminal. 54 2 Select the position
  • Kenwood DDX375BT | User Manual - Page 55
    ] Clears the currently memorized settings. • To cancel, press [Cancel]. A confirmation message appears. Press [Yes]. ❏ Updating the system You can update the system by connecting a USB device containing an update file. • To update the system, visit . 1 Create an
  • Kenwood DDX375BT | User Manual - Page 56
    application. It may take a while. If the update has been completed successfully, "Update Completed" appears. Reset the unit. • Do not disconnect the USB device while updating. • If the update has failed, turn the power off and then on, and retry the update. • Even if you have turned off the power
  • Kenwood DDX375BT | User Manual - Page 57
    (Page 10). • You cannot change the settings screen in the following situations: - When the unit is in standby (Page 7) - When the Bluetooth phone is used (making or receiving a call, during a call, or while voice dialing) ❏ setting screen Change the sound mode or adjust
  • Kenwood DDX375BT | User Manual - Page 58
    button illumination when you turn on the headlights. - The ILLUMI lead connection is required. (Page 64) • ON: Activates dimmer. • OFF: Cancels. reverse (R) position. - OFF (Initial): Select this when no camera is connected • Parking Guidelines: Displays (ON: Initial) or hides (OFF
  • Kenwood DDX375BT | User Manual - Page 59
    for displaying operation buttons and menu items. - English (Initial)/Local (the language selected above) Adjust the clock time. (Page 5) Specify the connection method of iPod/iPhone. (Page 20) Configure the App settings. (Page 48) Configure
  • Kenwood DDX375BT | User Manual - Page 60
    instruction manual that comes with the remote controller. V Caution: • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result if the Remote consult a physician. ❏ Battery installation Use two "AAA"/"R03"-size batteries
  • Kenwood DDX375BT | User Manual - Page 61
    REMOTE CONTROLLER ❏ DVD/VCD direct search mode. (See the right column.) * Only for DDX374BT/DDX24BT. ❏ iPod/Android (AUD mode) S/T Selects music/videos. I/W Starts DIRECT, the item to search for changes. 2 Press a number button to select a desired item. 3 Press ENTER to confirm the selection
  • Kenwood DDX375BT | User Manual - Page 62
    wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse. V Precautions on installation and connection • Mounting and wiring this product requires skills and experience. For best for installation 1 Wiring harness x 1 2 Trim plate x 1 3 Extension wire (2
  • Kenwood DDX375BT | User Manual - Page 63
    wire 2 connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness wires in the following order: ground, battery, ignition. 5 Connect the wiring harness connector to the unit. 6 Install Press the reset button. (Page 3) ❏ Installing the unit
  • Kenwood DDX375BT | User Manual - Page 64
    wire) White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect to the vehicle's parking 3 brake detection switch harness. • For best
  • Kenwood DDX375BT | User Manual - Page 65
    CONNECTION/INSTALLATION ❏ Connecting a USB device USB device* (commercially available) ❏ Connecting an Android device Android device (commercially available) 1.0 m USB 2.0 cable (commercially available) 1.0 m * Use CA-U1EX for extending the cable if necessary. (Max. 500 mA, 5V) ❏ Connecting iPod/
  • Kenwood DDX375BT | User Manual - Page 66
    CA-C3AV (optional accessory). *4 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. ❏ Connecting microphone for Bluetooth Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive
  • Kenwood DDX375BT | User Manual - Page 67
    CONNECTION/INSTALLATION Removing the unit ❏ Removing the trim plate 1 Engage the catch pins on the extraction key (4) and remove the two locks on the lower part. Lower
  • Kenwood DDX375BT | User Manual - Page 68
    REFERENCES Maintenance ❏ Caution on cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. ❏ Moisture condensation Moisture may
  • Kenwood DDX375BT | User Manual - Page 69
    REFERENCES Playing audio files (MP3/WMA/WAV/AAC) • This unit can play back files with the extension code , , or (regardless of the letter case-upper/lower). • This unit can play back files that meet the conditions below: - Bit rate: MP3: 8 kbps - 320 kbps WMA: 5 kbps - 320
  • Kenwood DDX375BT | User Manual - Page 70
    the USB device repeatedly while "Reading" is shown on the screen. • Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device. • Operation and power supply may not work as intended for
  • Kenwood DDX375BT | User Manual - Page 71
    visit the following KENWOOD web site:
  • Kenwood DDX375BT | User Manual - Page 72
    (Page 42) "Please Wait...": • The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). "No Voice Device": • The connected mobile phone does not have a voice recognition system. "No Data
  • Kenwood DDX375BT | User Manual - Page 73
    Enter the correct lock code. Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the
  • Kenwood DDX375BT | User Manual - Page 74
    Setup> is set to [BROWSE MODE]. • Make sure KENWOOD Music Play APP is installed on the Android device. • Reconnect the Android device and select the appropriate control mode. • If this does not solve the problem, the connected Android device does not support the Browse Mode. "NO DEVICE" or "READING
  • Kenwood DDX375BT | User Manual - Page 75
    connect the player again. The connected audio player cannot be controlled. • Check whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). The Bluetooth not indicated in its instructions, try "0000" or "1234." • Turn off, then turn on the Bluetooth device. Echo or
  • Kenwood DDX375BT | User Manual - Page 76
    Decoder MP3/WMA/AAC/WAV Video Decoder MPEG1/MPEG2/JPEG ❏ Bluetooth section Technology Frequency Bluetooth 3.0 2.402 GHz to 2.480 GHz Output Power +4 dBm (Audio/Video Remote Control Profile) 1.5 GAP (Generic Access Profile) PBAP (Phonebook Access Profile) 1.2 SDP (Service Discovery Profile)
  • Kenwood DDX375BT | User Manual - Page 77
    less than 1%THD) Preout Level DDX374BT: 4 V/10 kΩ DDX340BT/DDX24BT: 2.5 V/10 kΩ Preout Impedance ≤ 600 Ω Speaker Impedance 4 Ω to 8 Ω ❏ General Operating Voltage 14.4 V (10.5 V to 16 V allowable) Maximum Current Consumption 10 A Installation Dimensions (W × H × D) 182 mm × 111 mm × 160 mm
  • Kenwood DDX375BT | User Manual - Page 78
    Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is
  • Kenwood DDX375BT | User Manual - Page 79
  • Kenwood DDX375BT | User Manual - Page 80
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DDX374BT/DDX340BT/DDX24BT
Serial number
US Residents Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
B5A-1362-00 (KN)
© 2016 JVC KENWOOD Corporation
DDX374BT
DDX340BT
DDX24BT
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL