Kenwood DNX5120 Instruction Manual

Kenwood DNX5120 - Navigation System With DVD player Manual

Get Kenwood DNX5120 - Navigation System With DVD player PDF manuals and user guides
UPC - 019048176585
View all Kenwood DNX5120 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX5120 manual content summary:

  • Kenwood DNX5120 | Instruction Manual - Page 1
    GPS NAVIGATION SYSTEM DNX5120 DNX512EX MONITOR WITH DVD RECEIVER DDX512 DDX5032 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver.
  • Kenwood DNX5120 | Instruction Manual - Page 2
    Screen 34 Folder Select 36 Sirius/XM Control (North American sales area only) 37 Functions While Displaying the Control Screen 37 Channel Search 38 Channel Memory 38 Direct Channel Search 39 Bluetooth Audio Control 40 Functions While Displaying the Control Screen 40 2 DNX5120
  • Kenwood DNX5120 | Instruction Manual - Page 3
    Control 83 Tone Setup 84 Zone Control 84 Remote Controller 86 Battery installation 86 Remote Controller mode switch 86 Common operations (AUD mode) 87 DVD/VCD/CD/Audio files (DVD mode) 88 Radio (AUD mode) 89 NAVI (NAVI mode) 90 DVD Language Codes 91 Help? Troubleshooting
  • Kenwood DNX5120 | Instruction Manual - Page 4
    , or some display patterns may be different. Seek Mode Sets a station selection. The mode is switched in following order each time you touch the manually. Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Store in memory 4 DNX5120
  • Kenwood DNX5120 | Instruction Manual - Page 5
    English 5
  • Kenwood DNX5120 | Instruction Manual - Page 6
    CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.) • If you try to load a 3-inch-disc with its adapter into the unit, the adapter might separate from the disc and damage the unit. Other notes • If you experience problems during installation, consult your Kenwood dealer
  • Kenwood DNX5120 | Instruction Manual - Page 7
    For how to update the software, refer to the instruction manual of the navigation unit. iPod that can be connected to this unit You can control an iPod from this unit by connecting an iPod (commercial product) with Dock connector using an optional accessory iPod connection cable (KCA-iP300V ). The
  • Kenwood DNX5120 | Instruction Manual - Page 8
    Notes About Audio files • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) ⁄ • If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc
  • Kenwood DNX5120 | Instruction Manual - Page 9
    a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 1 4 2 6 2 3 1 5 4 DVD disc marks Symbol Description ALL Indicates a region number. The discs with this mark can be played with any DVD player. Indicates the number of audio languages
  • Kenwood DNX5120 | Instruction Manual - Page 10
    contents in the USB device is changed. • Make sure that the USB device is connected firmly. Removing the USB device Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. See (page 34). ¤ • Removing the USB device before entering the
  • Kenwood DNX5120 | Instruction Manual - Page 11
    switches between Favorite Source Select screen and Full Source Select screen by touching the button. 4 Displays Source Control screen. 5 Displays the Audio Control Menu screen. (page 82) 6 Displays the Setup Menu screen. (page 56) 7 Clock display ⁄ 8 • If a Bluetooth Unit is not connected, [TEL
  • Kenwood DNX5120 | Instruction Manual - Page 12
    for more than 1 second to switch to rear view. Press it again for more than 1 second to resume the normal display. ⁄ • Functions of the [NAV] button can be changed to Display Off function. See (page 60) for the function setting of the [NAV] button. 12 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DNX5120 | Instruction Manual - Page 13
    Video playback screen [FNC] button Easy Control buttons appear. Source Control screen [FNC] button Navigation information appears.* *DNX5120/DNX512EX only Navigation screen Picture or Video playback screen DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN TI Easy Control button DVD VIDEO Title
  • Kenwood DNX5120 | Instruction Manual - Page 14
    system button displayed on the screen. See the included NAVIGATION SYSTEM's INSTRUCTION MANUAL for information on using the navigation system. ⁄ • You can set the navigation system function when nothing else is displayed on the screen. If anything else, such as Easy control panel is displayed, erase
  • Kenwood DNX5120 | Instruction Manual - Page 15
    a station. r Switches the band Sirius : SR1/ SR2/ SR3 XM : XM1/ XM2/ XM3 t Switches the Seek mode. SEEK 1 : Tunes channels one after the other. SEEK 2 : Selects channels in memory one after the other. y When touched this area, the source control screen appears. When "Bluetooth" is selected: 17 17
  • Kenwood DNX5120 | Instruction Manual - Page 16
    • For the basic method of how to watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 86). Functions During the Playback Screen Basic functions are available even when the playback
  • Kenwood DNX5120 | Instruction Manual - Page 17
    3 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN TI DVD VIDEO Title 1 C h a p 1 T 00:00
  • Kenwood DNX5120 | Instruction Manual - Page 18
    in use) ; Appears when PBC is On. a VCD version indicator DVD Disc Menu Selects an option from the DVD Disc Menu. 1 Display the Disc Menu Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N DVD VIDEO Title 1 C h a p 1 T 0 0 : 0 0 : 0 5 MenuCtrl 3 3 6 1 5 Top Menu Return 3 4 7 En
  • Kenwood DNX5120 | Instruction Manual - Page 19
    . (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control. Zoom Control MenuCtrl SUB 3/ 3 Audio 1 / 2 Z o om Angle 1 / 1 Ex i t Z o omC t r l 16 16 16 15 Z o om x 2 16 17 Canc e l 18 Ex i t t Changes the zoom ratio at 4 levels (2 times, 3 times
  • Kenwood DNX5120 | Instruction Manual - Page 20
    Mode:Full AV - O U T: AV - I N DVD VCD PBC Scene VER2 ST 3 IN P 00:05 AF Z o omC t r l 2 2 2 1 Z o om x 2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. 20 DNX5120
  • Kenwood DNX5120 | Instruction Manual - Page 21
    Audio file> (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. or [DVD] button on the "Source Select" screen Indicator u Appears when a disc is inserted. During CD playback 1 2 3 4 6 9 7 10 5
  • Kenwood DNX5120 | Instruction Manual - Page 22
    . If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see (page 60). . You can search for folders and Audio files through a hierarchy. P Displays music information (such as Tag and content
  • Kenwood DNX5120 | Instruction Manual - Page 23
    During Playback Screen Basic functions are available even when the playback screen is displayed. 1 Display the playback screen 5 JPEG: Picture Control Button Area when it is updated. or [DVD] button on the "Source Select" screen DVD MEDIA 4 Mode:Full 5 AV - O U T: AV - I N 3 6 DVD MEDIA 1 2
  • Kenwood DNX5120 | Instruction Manual - Page 24
    3 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD MEDIA Mode:Full AV - O U T: AV - I N SCRN TI DVD MEDIA 2 1 P 00:00:05 PICTURE
  • Kenwood DNX5120 | Instruction Manual - Page 25
    Setup> (page 60). s You can search for folders and files through a hierarchy. d Displays information of file being played. g Scrolls the list. h Moves to the top hierarchy level. j Moves up a hierarchy level. Picture Control Adjusting the video display. 1 Start Picture Control DVD MEDIA Mode
  • Kenwood DNX5120 | Instruction Manual - Page 26
    operations, see (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 86). Functions While Displaying the Control Screen Switches to the source control screen to use various functions. [TUNER] button
  • Kenwood DNX5120 | Instruction Manual - Page 27
    ; Scrolls the list. a Switches the list display name to Station name or Program Service Name. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after
  • Kenwood DNX5120 | Instruction Manual - Page 28
    station in memory. 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory number appears. Touch ends automatically if you do not operate within 10 seconds. 28 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DNX5120 | Instruction Manual - Page 29
    3 Enter the name See (page 42) for information on how to enter a name. 1 4 End Name set 2 2 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. When is appeared, the text display is scrolled by pressing
  • Kenwood DNX5120 | Instruction Manual - Page 30
    type. (Only when receiving the FM broadcast) 1 Enter Program Type mode When the traffic bulletin starts... The Traffic Information screen appears automatically. Traffic Information screen ⁄ • It is necessary to have Traffic Information function set to On in order to have the Traffic Information
  • Kenwood DNX5120 | Instruction Manual - Page 31
    . • While connecting an iPod, "KENWOOD" appears on the iPod and the iPod's control is disabled. iPod Mode:Full AV - O U T: AV - I N SCRN TI 1 1 iPod 2 P 00:00:05 IN . 1 Music/Video Search. 2 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch
  • Kenwood DNX5120 | Instruction Manual - Page 32
    Control Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. When Video or picture is playing, press the [FNC] button. iPod SCRN TI iPod or Mode:Full AV - O U T: AV - I N P 00:00:05 IN [iPod] button on the "Source Select" screen
  • Kenwood DNX5120 | Instruction Manual - Page 33
    1 20 20 19 21 22 23 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by
  • Kenwood DNX5120 | Instruction Manual - Page 34
    1 Selects a file. 2 Plays or pauses. ⁄ P 00:00:05 IN . • The Easy Control Panel is hidden when you touch a central part of the monitor. USB Mode:Full AV - O U T: AV - I N SCRN TI USB or 0002/0006 P 00:00:05 IN [USB] button on the "Source Select" screen 34 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DNX5120 | Instruction Manual - Page 35
    , initial background is displayed. For information on setting the image display time, see (page 60). i Displays the folder list. See (page 36). o Displays the list of category. ; Displays information screen of music being played. ⁄ * Disabled during play list mode. 17
  • Kenwood DNX5120 | Instruction Manual - Page 36
    USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select 2 Select music 1 2 3 4 2 5 6 1 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 2 Scrolls the list. 3 Moves to the
  • Kenwood DNX5120 | Instruction Manual - Page 37
    Sirius/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner,
  • Kenwood DNX5120 | Instruction Manual - Page 38
    Sirius/XM Control (North American sales area only) Channel Search Specifying the desired category and category list. 7 Switches the sequence of the list. Changes the display from Channel Name, Category Name, Song Title, Artist Name, to Composer Name. (Sirius only) 38 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DNX5120 | Instruction Manual - Page 39
    Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. 3 Tune in the channel  : Press for # seconds. English 39
  • Kenwood DNX5120 | Instruction Manual - Page 40
    Bluetooth Audio Control When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in Bluetooth audio player and cell-phone. • You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the
  • Kenwood DNX5120 | Instruction Manual - Page 41
    and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . English 41
  • Kenwood DNX5120 | Instruction Manual - Page 42
    the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 Entry mode and returns to the previous screen. ⁄ • You can enter characters only after you have applied the parking brake. 42 DNX5120/DNX512EX/
  • Kenwood DNX5120 | Instruction Manual - Page 43
    panel 2 Display the Screen Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N or Off according to the Navigation Day/Night display setting. 7 Returns to the previous screen. ⁄ • The Screen Control screen is displayed only when you have applied the parking brake. • The picture quality
  • Kenwood DNX5120 | Instruction Manual - Page 44
    Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone. Control Screen Function Displaying the control screen and using various functions. 1 Display the Hands-Free Control screen Press the [FNC] button for
  • Kenwood DNX5120 | Instruction Manual - Page 45
    become ineffective if pressed. • When the Hands-Free Control screen appears, the name of the connected cell-phone is displayed control unit may discord from those displayed on the cell-phone. No status is displayed if information about it cannot be obtained. • Setting the cell-phone in the private mode
  • Kenwood DNX5120 | Instruction Manual - Page 46
    phone number. See (page 55). 3 Clears the number. 4 Returns to the previous screen. 3 Make a call You can start talking when the destination responds. 4 End the call The Hand Free screen reappears. ⁄ • You can input max 32 digits. 46 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DNX5120 | Instruction Manual - Page 47
    Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the DTMF input screen Display the Talking screen. See (page 46). Calling by Phonebook You can call a person using his/her phone number that you have registered
  • Kenwood DNX5120 | Instruction Manual - Page 48
    phone number. See (page 55). y Scrolls the phone number. u Returns to the Name List screen. 5 Make a call ⁄ • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone
  • Kenwood DNX5120 | Instruction Manual - Page 49
    or Incoming Calls screen ⁄ • The Outgoing Calls list screen or Incoming Calls list screen shows the list of screen 1 3 4 2 5 2 6 1 Outgoing Calls list. 2 Scrolls the list. 3 Makes a call to the selected number. 4 Creates an SMS for the selected phone number. See
  • Kenwood DNX5120 | Instruction Manual - Page 50
    displayed phone number. 5 Creates an SMS to the displayed address. See (page 55). 6 Selects the Phone number category. 7 Scrolls the phone number. 8 Returns to the previous screen. 4 Make a call If the voice recognition is succeeded and there is only one phone number
  • Kenwood DNX5120 | Instruction Manual - Page 51
    ON") "ON": Beep is heard. "OFF": Beep is canceled. 5 Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. 6 Returns to the Hands-Free Control screen. 7 Returns to the "HandsFree Setup 1" screen. 8 Sets whether to use cell-phone phonebook, outgoing calls list and
  • Kenwood DNX5120 | Instruction Manual - Page 52
    Hands Free Unit Control Voice Recognition on for data with voice for voice recognition already registered. 2 Display the voice registration screen 5 End voice registration ⁄ • A message is displayed if the voice is not 4 Utter the voice to register (2nd try) 52 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DNX5120 | Instruction Manual - Page 53
    Recognition. 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See (page 44). 2 Select the confirmation screen. Touch [YES] to delete or [NO] to cancel. 5 Returns to the Hands-Free Set Up screen. 3 Display voice registration screen ⁄
  • Kenwood DNX5120 | Instruction Manual - Page 54
    control screen preset button. 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See
  • Kenwood DNX5120 | Instruction Manual - Page 55
    the message. e Returns to the previous screen. 4 Create a message 14 17 15 14 17 16 18 19 20 21 22 r Moves the cursor. t Displays remaining number of characters allowed. y Enters character. u Changes keyboard character type. i Sends the message. o Sets the key layout of the character
  • Kenwood DNX5120 | Instruction Manual - Page 56
    to set various functions. 1 Display the control screen of any source Touch any source button on the "Source Select" screen. 2 Display the Setup Menu 3 Select the setup item 1 2 2 1 The selected setup screen appears. 2 Scrolls the setup menu. ⁄ • [Audio Setup] and [AV Interface] options can be locked
  • Kenwood DNX5120 | Instruction Manual - Page 57
    "DVD Setup 2" screen. 2 Selects a disc menu language.*1 (See , page 58) 3 Selects a subtitle language.*1 (See , page 58) 4 Selects an audio language.*1 (See , page 58) 5 Sets the dynamic range.*1 ( "Wide") The dynamic range is reduced by changing from
  • Kenwood DNX5120 | Instruction Manual - Page 58
    Audio Language setup.) 4 Sets the language and returns to the "DVD Setup 1" screen. (It appears after you have entered a language code.) 5 Clears the language code. 3 Enter a language code See (page 91) and select the desired language. 4 Set the language you use 58 DNX5120
  • Kenwood DNX5120 | Instruction Manual - Page 59
    to the "DVD Setup 2" screen. 3 Indicates the present parental lock level. 4 Determines the code number and displays the Parental Level setup screen. 5 Clears the code number. ⁄ • The number you enter first is set as your code number. • You can clear the code number by pressing the Reset button
  • Kenwood DNX5120 | Instruction Manual - Page 60
    you to scroll the screen manually. 4 Selects a remote control signal. ( "ON") When turned "OFF", the remote control of TV reception is rejected. 5 Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD or a music CD. "2": Forcibly plays back a disc
  • Kenwood DNX5120 | Instruction Manual - Page 61
    picture is changed. ("Short", "Middle", "Long") Panel Color Coordinate Sets the screen and button illumination color. 1 Display the Panel Color Coordinate screen  : 2 3 1 Sets to the touched color. 2 Sets and registers favorite color. 3 Returns to the "System Setup 2" screen. To register your
  • Kenwood DNX5120 | Instruction Manual - Page 62
    Setup You can set audio and visual (AV) interface parameters. 1 Display the AV Interface screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 3 4 1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT
  • Kenwood DNX5120 | Instruction Manual - Page 63
    ( "21") r Mutes the volume during voice guidance of the navigation system. ( "ON") When turned "ON", the volume level drops for voice guidance. t Sets the guide display method of the Navigation system. ( "ON") (DNX5120/ DNX512EX only) "ON" : Pops up the guide. "OFF" : Guide is not displayed. English
  • Kenwood DNX5120 | Instruction Manual - Page 64
    to the "User Interface 3" screen. 7 Sets an on-screen display of the iPod Playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. 8 Sets an on-screen display of the navigation screen. ( "Off") "Auto
  • Kenwood DNX5120 | Instruction Manual - Page 65
    to the "User Interface 3" screen. t Sets whether to display the name of the , , , and buttons on the right side of the menu screen. y Registers the source displayed in the favorite source screen. See (page 65). Direct Source Button Setup Registers the source displayed
  • Kenwood DNX5120 | Instruction Manual - Page 66
    . 1 Connect the device which has the image to load 2 Display the User Interface screen Touch Menu" screen (page 56). in the "Setup 3 Display the Background Memory screen Background Delete Deletes the background image. 1 Delete the image you have loaded 2 Confirm 4 Select the image to load
  • Kenwood DNX5120 | Instruction Manual - Page 67
    screen Touch Menu" screen (page 56). in the "Setup 2 Start Touch panel setup 2 Select a image for background 2 1 1 Returns to the initial background. 2 Returns to the original screen. 3 Set the image as the background 3 Adjust the Touch panel 1 2 Follow the instruction on the screen
  • Kenwood DNX5120 | Instruction Manual - Page 68
    On or Off. "NAV-SYNC" (DNX5120/DNX512EX only): Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. ⁄ • In this Screen Control screen, you can perform setups for the menu screen. Setups for videos such as DVD can be performed on the (page 43
  • Kenwood DNX5120 | Instruction Manual - Page 69
    Selects a screen mode of the DVD playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" p Selects a screen mode of
  • Kenwood DNX5120 | Instruction Manual - Page 70
    can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen
  • Kenwood DNX5120 | Instruction Manual - Page 71
    Security Code Setup screen Touch Menu" screen (page 56). in the "Setup 2 Start to cancel a registration of the Security Code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code Now, you can use your Receiver. 3 Enter a security Code Input
  • Kenwood DNX5120 | Instruction Manual - Page 72
    lock for Sirius. 1 Display the Sirius Setup screen Touch Menu" screen (page 56). in the "Setup 1 2 3 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. ⁄ • "Wide Screen" cannot be set while the iPod is connected. 1 Sets the Parental lock code. See
  • Kenwood DNX5120 | Instruction Manual - Page 73
    Sirius Parental Code Setup Sets a Sirius Parental code. 1 Display the Parental Code screen 4 Confirm the code number Enter the same code number as you input in step 3. ⁄ • If you have already completed the code registration, is displayed. • If you to clear the code which has already registered,
  • Kenwood DNX5120 | Instruction Manual - Page 74
    number Enter the same code number as you input in . 2 Enter the code number Enter the same code number as you input in . Parental Lock function is now set to on or off, and the display returns to "SIRIUS Setup" screen. ⁄ • If you have not
  • Kenwood DNX5120 | Instruction Manual - Page 75
    Returns to the "SIRIUS Setup" screen. Bluetooth Setup Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of the
  • Kenwood DNX5120 | Instruction Manual - Page 76
    . p Scrolls. q Returns to the previous screen. 76 DNX5120/DNX512EX/DDX512/DDX5032 4 Enter PIN code Enter the PIN code specified for the Bluetooth unit to register. 12 13 14 15 w Enters a code number. e Cancels registration of PIN code. r Enters PIN code. t Clears the code number. ⁄ • You can also
  • Kenwood DNX5120 | Instruction Manual - Page 77
    Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Receiver PIN Code screen Registering Special Bluetooth Unit Registers Special Bluetooth unit that results in error by normal
  • Kenwood DNX5120 | Instruction Manual - Page 78
    the service to use 3 Delete the Bluetooth unit 4 5 6 7 4 Connects/disconnects cell-phone to use for Hands Free. 5 Connects/disconnects Audio player to use for Bluetooth Audio. 6 Deletes registration (pairing). 7 Returns to the previous screen. 4 Confirm deleting of Bluetooth unit 78 DNX5120
  • Kenwood DNX5120 | Instruction Manual - Page 79
    Software Information Checks the software version of this unit. 1 Display the Software Information screen Touch Menu" screen (page 56). in the "Setup 1 1 Displays the software version. English 79
  • Kenwood DNX5120 | Instruction Manual - Page 80
    the memorized settings: 1 2 1 Locks the Audio Setup and AV Interface settings. When is selected, you cannot set the Audio Setup and AV Interface settings. 2 Memorizes or recalls the settings. To cancel the function, touch . To cancel memorization, touch . The "Setup Menu" screen appears
  • Kenwood DNX5120 | Instruction Manual - Page 81
    English 81
  • Kenwood DNX5120 | Instruction Manual - Page 82
    during low volume. Settable Only when zone function is set to Off. See (page 84). 6 Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, MP3, WMA or AAC) is displayed. 1 Switches to the selected Audio Control screen. 7 8 9 82 DNX5120/DNX512EX
  • Kenwood DNX5120 | Instruction Manual - Page 83
    you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud. Equalizer Control You can set up the equalizer. 1 Display Equalizer Control Touch in the "Audio Control Menu" screen (page 82
  • Kenwood DNX5120 | Instruction Manual - Page 84
    when the Zone function is On.) ⁄ • There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - (page 56) and (page 83) are not available. - When "DVD" or "USB" is selected as the front source, the rear source can be
  • Kenwood DNX5120 | Instruction Manual - Page 85
    set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 62). English 85
  • Kenwood DNX5120 | Instruction Manual - Page 86
    source or tuner source, etc. DVD mode Switch to this mode when playing DVDs or CDs etc. with the player integrated in this unit. Not used O RETURN CANCEL NAVI mode This is switched when controlling Navigation unit. ⁄ • The position of the remote control mode switch is indicated in the title
  • Kenwood DNX5120 | Instruction Manual - Page 87
    D O O ANGLE ZOOM O VOL Function Switches the function screen. O ENTER O O DVD • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE O MODE Switches the screen mode. Screen mode changes each time you press this key. O O TV
  • Kenwood DNX5120 | Instruction Manual - Page 88
    Remote Controller DVD/VCD/CD/Audio files (DVD mode) Folder search Selects the folder to be played.  O FM+ D O O O AM−  Y 1 1 2ABC  ANGLE ZOOM 3 DEF O VOL O 2 ZONE Track search and file search Selects the track or file to be played. VIEW MAP AUD • DVD • TV directly. DVD Title number
  • Kenwood DNX5120 | Instruction Manual - Page 89
    Displays the DVD menu. Turns the playback control on or off while playing VCD. O ENTER O O • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR FM+ ANGLE O SUBTITLE Switches the subtitle language. O NAVI MODE/TOP MENU FNC/MENU
  • Kenwood DNX5120 | Instruction Manual - Page 90
    MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ZOOM Zooms in or out the navigation map. O SRC  MENU ZOOM OUT IN ENTER O DISP V.SEL  POSITION AUD • DVD • TV• MENU Displays Main menu. O SRC  MENU ZOOM OUT IN ENTER O DISP V.SEL  POSITION AUD • DVD • TV• CANCEL Displays previous screen
  • Kenwood DNX5120 | Instruction Manual - Page 91
    DVD Language Codes Code Language Code aa Afar is ab Abkhazian it af Afrikaans ja am Portuguese Quechua Rhaeto-Romance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Code Language si Singhalese sk Slovak sl Slovenian sm Samoan sn Shona so Somali
  • Kenwood DNX5120 | Instruction Manual - Page 92
    another media. Navigation ? The touch panel control of the navigation system does not work. ✔ Navigation software is not the latest version. ☞ Update the navigation software. For how to update the software, refer to the instruction manual of the navigation unit. 92 DNX5120/DNX512EX/DNX512EX/DDX512
  • Kenwood DNX5120 | Instruction Manual - Page 93
    English 93
  • Kenwood DNX5120 | Instruction Manual - Page 94
    Change the source to any source other than USB. Remove the USB device. Authorization Error: Connection to the iPod has failed. ➡ Remove the iPod and then reconnect it. The unit does not support the iPod. ➡ See (page 7). Update your iPod: The iPod's software
  • Kenwood DNX5120 | Instruction Manual - Page 95
    can receive signal. Updating Firmware: Updating the firmware of Sirius tuner. ➡ Operation is invalid until the update is completed. Updating Channels **% Completed: Updating the Sirius Channel Map. ➡ Operation is invalid until the update is completed. Subscription Updated: Updating the suscription
  • Kenwood DNX5120 | Instruction Manual - Page 96
    DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit Number : 16/ 20/ 24 bit USB interface section USB Standard : USB 1.1/ 2.0 File Sytem : FAT 16/ 32 Maximum Power Supply Current : 500 mA D/A Converter : 24 Bit Audio Decoder : MP3 DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032
  • Kenwood DNX5120 | Instruction Manual - Page 97
    Middle : 1 kHz ± 10 dB Treble : 10 kHz ± 10 dB Navigation section (DNX5120/DNX512EX only) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view
  • Kenwood DNX5120 | Instruction Manual - Page 98
    the Apple logo, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. is a trademark of DVD Format/Logo Licensing Corporation copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection
  • Kenwood DNX5120 | Instruction Manual - Page 99
    to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However
  • Kenwood DNX5120 | Instruction Manual - Page 100
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
GPS NAVIGATION SYSTEM
DNX5120
DNX512EX
MONITOR WITH DVD RECEIVER
DDX512
DDX5032
INSTRUCTION MANUAL
©
B64-3971-00/00 (KW/K2W/RW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX5120/DNX512EX/DDX512/DDX5032
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com