Kenwood DNX5190 Instruction Manual

Kenwood DNX5190 Manual

Get Kenwood DNX5190 PDF manuals and user guides View all Kenwood DNX5190 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX5190 manual content summary:

  • Kenwood DNX5190 | Instruction Manual - Page 1
    of each media! iPod USB VCD Tuner HD Radio Disc Media Music CD DVD VIDEO SIRIUS XM BT Audio Pandora Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System. For
  • Kenwood DNX5190 | Instruction Manual - Page 2
    14 Common Operations 16 Navigation Operation 18 DVD/Video CD (VCD) Operation 20 DVD/VCD Basic Operation 20 DVD Disc Menu Operation 23 Zoom Control For DVD And VCD________ 24 DVD Setup 25 CD/Audio And Visual Files/ iPod Operation 28 Music/Video/Picture Basic Operation____ 28 Search
  • Kenwood DNX5190 | Instruction Manual - Page 3
    finalization process see your writing software, and your recorder instruction manual.) How To Read This Manual Return to the Top page CD, Disc, iPod, USB device Search Operation You can search the music, video, or picture file by some operations. NOTE • If you use a remote controller, you can jump
  • Kenwood DNX5190 | Instruction Manual - Page 4
    of the SD card slot. Receives the remote control signal. You can enable or disable this feature by Remote Sensor (P.79). A slot to insert a disc media. An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. * The display may not
  • Kenwood DNX5190 | Instruction Manual - Page 5
    of the volume on/off. • Turning adjusts volume up or down. • Pressing for 1 second displays Tone Control screen (P.96).* 6 SCRN • Displays the Screen Control screen. • Pressing for 1 second displays rear view camera display. 7 Remote Sensor Receives the remote control signal. You can enable
  • Kenwood DNX5190 | Instruction Manual - Page 6
    for 1 second. If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.11). 10 Return to the Top page Basic Operations Initial setup Perform this setup when you use this unit first time or when you reset the unit (P.107). 1 Set each item as
  • Kenwood DNX5190 | Instruction Manual - Page 7
    NOTE • These settings can be set from the SETUP menu. See Setting Up (P.78). 12 How To Play Media Music CD and disc media 1 Press the button. device from the cable. iPod 1 Connect the iPod with the iPod cable. The unit loads the disc and playback starts. The unit reads the iPod and playback
  • Kenwood DNX5190 | Instruction Manual - Page 8
    ] is not displayed during video/picture playback, press the button. (P.6, P.8) Top Menu screen appears. From this screen, you can perform the following functions. Function Icon Switch the audio source etc. Enter setup mode Display navigation screen Turn off all audio function etc. or
  • Kenwood DNX5190 | Instruction Manual - Page 9
    as follows. :  Displays the EXT SW Control screen. : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the Lists all the music in the lower hierarchy. Moves to the upper hierarchy. Displays current category folder. Displays music/picture/movie file list
  • Kenwood DNX5190 | Instruction Manual - Page 10
    to the Top page Basic Operations Navigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen 1 Press the button. The navigation screen appears. Control audio from the navigation screen You can control audio
  • Kenwood DNX5190 | Instruction Manual - Page 11
    can be controlled from the source control screen and playback screen. NOTE • Set the remote controller mode switch to DVD mode before starting operation, see Switching the operation mode (P.101). • The screen shot below is for DVD. It may be different from the one for VCD. Control screen 1 Video
  • Kenwood DNX5190 | Instruction Manual - Page 12
    ) Turn PBC on or off. [ SETUP] Touch to display the SETUP Menu screen. See Setting Up (P.78). [ AUDIO] Touch to display the Audio Control screen. See Controlling Audio (P.90). [ EXT SW] Touch to control the external device power supply. For details, see External Device Control (P.88). [ REAR ] Touch
  • Kenwood DNX5190 | Instruction Manual - Page 13
    showing pictures cut at the right and left ends). Parental Level* See Parental level (P.26). DISC SETUP See Disc setup (P.27). Stream Information Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, WMA or AAC) appears. * T hese items are disabled when a DVD is
  • Kenwood DNX5190 | Instruction Manual - Page 14
    to the DVD SETUP screen. NOTE • To cancel the setup and return DVD or a music CD. 2: Forcibly plays back a disc as a music CD. Select [2] if you wish to play a music CD having a special format or if you cannot play a disc in [1] position. On Screen DVD Sets an on-screen display. Auto: When updated
  • Kenwood DNX5190 | Instruction Manual - Page 15
    ) • USB device (P.30) • Disc media (P.28) • iPod (P.30) Music CD and disc media NOTE • In this manual, "Music CD" will be referred to as the general CDs which include music tracks in. "Disc media" will be referred to as CD/DVD disc which includes audio, picture or video files. • The screen shot
  • Kenwood DNX5190 | Instruction Manual - Page 16
    30 Return to the Top page CD, Disc, iPod, USB device Picture/video screen 9 9 10 9 Searching file area (picture/video file only) • Touch to search the next/ when there is no music file in the current folder. 10 Key display area (picture/video file only) Touch to display the last control
  • Kenwood DNX5190 | Instruction Manual - Page 17
    to output the sounds and images produced by the application running on your iPod touch or iPhone. In the App mode, you can control only the "Pause and play" and "Selecting a song" functions from this unit. [ ] [ ] (disc media and USB device only) Searches previous/next folder. [ ] (picture files in
  • Kenwood DNX5190 | Instruction Manual - Page 18
    Return to the Top page CD, Disc, iPod, USB device Search Operation You can search music, video or picture files by the following operations. NOTE • If you use a remote controller, you can jump directly to the desired track/file with entering the track/folder/file number, play time, etc. For details,
  • Kenwood DNX5190 | Instruction Manual - Page 19
    appears in full screen. See number 9-10 in USB device and iPod (P.30) for operation of picture screen. Search from album artwork (USB device and iPod only) You can search music files by selecting the album artwork. 1 Touch [ ]. Sub function menu appears. 2 Touch [ ]. Return to the Top page
  • Kenwood DNX5190 | Instruction Manual - Page 20
    Return to the Top page CD, Disc, iPod, USB device Favorite list You can create an original in the artwork list screen. • The favorite list mode resumes after disconnecting/connecting the device or turning on/off. File being played, playing time code, favorite list contents, favorite list order, etc
  • Kenwood DNX5190 | Instruction Manual - Page 21
    Return to the Top page CD, Disc, iPod, USB device PANDORA® internet radio Operation You can listen to the PANDORA® internet radio on this unit by controlling the application installed in the iPhone or Bluetooth device. To enter PANDORA mode, touch [Pandora] icon in the Top Menu screen. NOTE •
  • Kenwood DNX5190 | Instruction Manual - Page 22
    • You can operate PANDORA by using the remote controller. However, only playing, pausing, and skipping are available. • You cannot select iPod as rear source when you select PANDORA as main source in dual zone function. USB/iPod/DivX Setup You can perform setup when using USB/ iPod/ DivX (DNX7490BT
  • Kenwood DNX5190 | Instruction Manual - Page 23
    page CD, Disc, iPod, USB device DivX setup (DNX7490BT/ DNX6490BT) This feature is available only for Central and South America sales area. 1 Set each the operation. NOTE • [DivX(R) Registration Code] is disabled when a DVD is being played. • When downloading a DivX VOD file controlled by DRM
  • Kenwood DNX5190 | Instruction Manual - Page 24
    remote controller mode switch to AUD mode before starting operation, see Switching the operation mode (P.101). • HD Radio broadcasting can be received only by the DNX7190HD, DNX6990HD, and DNX6190HD. • HD Radio broadcasting is for North American sales page Radio, HD Radio, SIRIUS XM ], [MANUAL]. •
  • Kenwood DNX5190 | Instruction Manual - Page 25
    Device Control (P.88). [ REAR ] Touch to mute the rear speaker. This HD Radio receiver enables: • Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. • Adjacent to
  • Kenwood DNX5190 | Instruction Manual - Page 26
    Content alert (P.57). [ ] Turns the City alert function on or off. For details, see Content alert (P.57). [ SETUP] Touch to display the SETUP Menu screen. See Setting Up (P. Device Control (P.88). 50 [ REAR ] Touch to mute the rear speaker. Return to the Top page Radio, HD Radio, SIRIUS XM 51
  • Kenwood DNX5190 | Instruction Manual - Page 27
    2 Touch desired band key. Manual memory You can store the current receiving station or channel in memory. to the Top page Radio, HD Radio, SIRIUS XM Direct search (SIRIUS XM and HD Radio tuner only) You HD Radio tuner, you can search by frequency. Each time you touch [Mode] in the left part of the
  • Kenwood DNX5190 | Instruction Manual - Page 28
    from the list. NOTE • For SIRIUS XM tuner, all the channels in the selected category appear. • For SIRIUS XM tuner, touching [All Channel] . 2 Touch [RCV] in the multi function menu. HD Radio tuner Mode screen appears. 3 Select the receive mode from [Auto], [Digital], and [Analog] using [2]
  • Kenwood DNX5190 | Instruction Manual - Page 29
    your iPod to your computer. So then you just need to click and then easily buy and download the song you were tagging directly from the Apple iTunes Music Store. Registering a tag 1 Press the button instructed in each diagram for 1 second during listening to the song from HD Radio tuner or SIRIUS XM
  • Kenwood DNX5190 | Instruction Manual - Page 30
    is received. [4] [¢] Searches the previous/next track. [38] Plays or pauses. [1] [¡] Fast forward or fast backward. Status bar Confirms the current location. [ ] Exit Instant Replay [ ] Displays a list of recorded data on a program basis. 2 Touch [ ] to display a program list. SIRIUS XM Setup NOTE
  • Kenwood DNX5190 | Instruction Manual - Page 31
    when the channel is deemed inappropriate. 1 Touch [ON] or [OFF] of [Parental Lock Mature] in the SIRIUS XM SETUP screen. Turns the Mature on or off. Default is "OFF". NOTE • When this function is turned on, Mature channels are indicated "forced on" in the function which is described in Parental lock
  • Kenwood DNX5190 | Instruction Manual - Page 32
    Return to the Top page Radio, HD Radio, SIRIUS XM Content alerts setup You can turn on or off the Content alerts function. 1 Touch [ON] or [OFF] of [Content alerts] in the SIRIUS XM SETUP screen. Turns the Content alerts on or off. Default is "ON". Content alerts Content Set You can set a content
  • Kenwood DNX5190 | Instruction Manual - Page 33
    Searched Device List screen cannot be displayed, when the receiving source is PANDORA internet radio or Bluetooth Audio, 2 Touch [PIN Code Set]. Return to the Top page Bluetooth Operation NOTE • Registering operation can be performed from the Bluetooth unit. In this operation, entering the PIN code
  • Kenwood DNX5190 | Instruction Manual - Page 34
    the receiving source is PANDORA internet radio or Bluetooth rear speaker. 4 Control switching area Touch to switch between the Simple Control and List Control screen. 5 File information Displays the information of the current file. * These items appear only when the audio player which supports
  • Kenwood DNX5190 | Instruction Manual - Page 35
    supports auto-download of phonebook but not downloaded automatically, follow the procedure above to download manually. • See the instruction manual screen appears. 2 Select a dialing method. Return to the Top page Bluetooth Operation *1 Y ou can sort the list to begin with touched character.
  • Kenwood DNX5190 | Instruction Manual - Page 36
    the screen. Muting Audio Volume upon Reception of Phone Call (DNX5190 only) When a call is received or you answer a call, the Call Interrupt screen appears and system is paused. Return to the Top page Bluetooth Operation Bluetooth Setup You can register PIN code, select the device to connect, and
  • Kenwood DNX5190 | Instruction Manual - Page 37
    Bluetooth SETUP screen. Receiver PIN Code Set screen appears. 2 Enter a code number and touch [Enter]. NOTE • If you want to cancel the registration, touch [Cancel]. • If you want to clear the entered number, touch [Clear]. Bluetooth output setup You can select speakers to output the sound Resets
  • Kenwood DNX5190 | Instruction Manual - Page 38
    Return to the Top page Bluetooth Operation SMS (Short Message Service) You can use SMS function. 1 Touch [SMS] received message list. [Sent Message List] Displays the sent message list. [Draft] Displays the newest draft message. This key becomes active when any message has been created after turning
  • Kenwood DNX5190 | Instruction Manual - Page 39
    Return to the Top page Bluetooth Operation Using templates You can create a message easily by selecting moves to the step 2. See the table below for explanations for each key. Register from received SMS messages Touch [ ]. Register from sent SMS messages Touch [ ]. Register from phonebook Touch
  • Kenwood DNX5190 | Instruction Manual - Page 40
    Return to the Top page Setting Up Setting Up Monitor Screen Setup You can adjust image quality in iPod video, picture file, menu screen, etc. 1 Press the button instructed in each diagram when the desired screen is displayed. Press for 1 second Bright/Tint/Color/Contrast/Black/ Sharpness Adjusts
  • Kenwood DNX5190 | Instruction Manual - Page 41
    Memory] in the System Menu screen. SETUP Memory screen appears. 2 Follow the instruction on the screen. SW Name Sets the name of the external device. Output Pattern Sets the power signal output mode among "Pulse"/"Level". Default is "Pulse". You can set to turn output on/off each time the button
  • Kenwood DNX5190 | Instruction Manual - Page 42
    Up 3 Follow the instruction on the screen. Display Setup 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. [Initialize] when [Panel Color Scan] is set to off. • Touch [Initialize] to reset the settings to the default settings. 3 Touch the desired color. 3 Touch the desired
  • Kenwood DNX5190 | Instruction Manual - Page 43
    Navigation Setup You can set navigation parameters. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Navigation]. Navigation SETUP of the navigation system. Default is "25". NAV Mute Mutes the volume of rear speakers during voice guidance of the navigation system.
  • Kenwood DNX5190 | Instruction Manual - Page 44
    instruction manual of your camera. Front Camera*1 Turn SETUP] in the list. AV-IN SETUP screen appears. 5 Set each item as follows. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. • [Bluetooth Module Version] is available only . iPod
  • Kenwood DNX5190 | Instruction Manual - Page 45
    Default is "VIDEO1". 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [AV-OUT]. External Device Control Control the TV , iPod, or OFF. EXT SW Control screen appears. NOTE • If [EXT SW] is not displayed, touch [ ]. 2 Touch the desired switch key. You can turn on or
  • Kenwood DNX5190 | Instruction Manual - Page 46
    (P.92) • Select DSP (P.93) • Set up elevation (P.93) Speaker Select screen appears. • Set up speakers (P.90) Speaker setup You can select a speaker type and its size to get the best sound effects. When the speaker type and size are set, the speaker crossover network is set automatically. 1 Touch
  • Kenwood DNX5190 | Instruction Manual - Page 47
    "Rear Deck", "2nd Row"/ "3rd Row" (Minivan, Minivan (Long)). DSP select You can select whether using DSP (Digital Signal Processor) System. 1 Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen. Return to the Top page Audio Setting Up Elevation You can raise the sound position
  • Kenwood DNX5190 | Instruction Manual - Page 48
    .5 Hz is set to the same gain level as 62.5 Hz. Loudness When turned on, low and high tones are enhanced. Highway Sound Boosts a certain range of sound that becomes hard to hear due to road noise. See Highway sound setting (P.96). SW Level Adjusts the subwoofer volume. This setting is not available
  • Kenwood DNX5190 | Instruction Manual - Page 49
    ]. Each setting value indicates the soundscape level. NOTE • This setting is not available during HD Radio tuner source. [3] (Front Source, Rear Source) Select the audio source for each. [∞], [5] (Rear VOL.) Adjusts the rear channel volume. [Single Zone] Touch to turn off the dual zone function. 97
  • Kenwood DNX5190 | Instruction Manual - Page 50
    of the furthest speaker and other speakers. 4 Input the differences calculated in step 3 for individual speakers. 5 Adjust gain for individual speakers. A sound image will be shifted to the speaker with increased gain. Example: When [Front All] is selected as the listening position +3.4feet
  • Kenwood DNX5190 | Instruction Manual - Page 51
    Switch to this mode when playing a disc media including DVD, VCD, and CD. NAV mode Switch to this mode when controlling navigation function. NOTE • When controlling a player that is not integrated in the unit, select "AUD" mode. Using the remote controller, you can jump directly to the desired file
  • Kenwood DNX5190 | Instruction Manual - Page 52
    it is pressed. NAV Switches between the heading up navigation and north up navigation map displays. AUD, DVD Selects the folder to be played. During radio, HD Radio, and SIRIUS XM source in AUD mode, switches the bands to be received. AUD, DVD Selects the track or file to be played. During
  • Kenwood DNX5190 | Instruction Manual - Page 53
    Connect the wire correctly. See "Connection" in the Quick Start Guide. Set "CD Read" to "1". See Disc setup (P.27). Turn off the random function. Turn off . 104 Other Return to the Top page Troubleshooting Problem The Touch Sensor Tone doesn't sound. Reason Solution The preout jack is being
  • Kenwood DNX5190 | Instruction Manual - Page 54
    to the iPod has failed. Error Update your iPod The iPod's software is an older version which the unit can not support. Navigation Error. Please turn on power again later. The communication error has occurred due to severely cold temperature. Solution Check the USB device. Some trouble may have
  • Kenwood DNX5190 | Instruction Manual - Page 55
    not supported. ‡ ‡ × × % Only music CD session can be played. ‡ × × % Only CD layer can be played. *1 Incompatible with 8 cm (3 inch) discs. *2 Available only for Central and South America sales area. NOTE • When buying DRM enabled contents, check the Registration Code in the DivX setup
  • Kenwood DNX5190 | Instruction Manual - Page 56
    the conformity information on iPod/iPhone software, access www.kenwood.com/cs/ce/ipod/. • By connecting your iPod/iPhone to this unit with an optional accessory iPod connection cable (KCA-iP202), you can supply power to your iPod/ iPhone as well as charge it while playing music. However, the power
  • Kenwood DNX5190 | Instruction Manual - Page 57
    mode is set to MANUAL. HD HD Radio station is being received. M/S A multicast digital broadcast is being received. ANALOG An analog broadcast is being received. DIGITAL A digital broadcast is being received. ST A stereo broadcast is being received. TAG Tagging is enabled. ■■SIRIUS XM SEEK1 Seek mode
  • Kenwood DNX5190 | Instruction Manual - Page 58
    Picture Size DNX7190HD, DNX7490BT : 6.95 inches (diagonal) wide : 156.6 mm (W) x 81.6 mm (H) DNX6990HD, DNX6190HD, DNX6490BT, DNX5190, : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED ■■DVD player section D/A Converter : 24 bit Audio Decoder : Linear PCM/Dolby Digital/dts
  • Kenwood DNX5190 | Instruction Manual - Page 59
    Ω Tone (DNX6990HD, DNX6190HD, DNX6490BT, DNX5190, DNX5060EX) Bass: 100Hz ± 10dB Middle: 1kHz ± 10dB Treble: 10kHz ± 10dB ■■External SW (DNX7190HD, DNX7490BT) Maximum Power Supply Current : 500 mA Return to the Top page Appendix ■■Navigation section Receiver : High-sensitivity GPS receiver Reception
  • Kenwood DNX5190 | Instruction Manual - Page 60
    under license. • About PANDORA® internet radio: Requirements for listening to the PANDORA® internet radio are as follows: iPhone or iPod touch • Use an Apple iPhone or iPod touch running under iOS3 or later. • Search for "Pandora" in the Apple iTunes App Store to find and install the most current
  • Kenwood DNX5190 | Instruction Manual - Page 61
    Return to the Top page Appendix DNX7490BT/DNX6490BT: ■■The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a
  • Kenwood DNX5190 | Instruction Manual - Page 62
    This HD Radio receiver enables:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
What Do You Want To Do?
Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM.
In this manual, you will learn various convenient functions of the system.
Click the icon of the media you want to play.
With one-click, you can jump to the section of each media!
iPod
USB
VCD
DVD VIDEO
Music CD
Disc Media
BT Audio
Pandora
Tuner
HD Radio
SIRIUS XM
12DNXMid_IM345_Ref_K_En_01
(K/K2/R)
© 2011 JVC KENWOOD Corporation
DNX7190HD
DNX7490BT
DNX6990HD
DNX6190HD
DNX6490BT
DNX5190
DNX5060EX
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model DNX7190HD/ DNX7490BT/ DNX6990HD/ DNX6190HD/ DNX6490BT/ DNX5190/ DNX5060EX Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
Before reading this manual, click the button below to check the latest edition and the
modified pages.