Kenwood DNX690HD Instruction Manual

Kenwood DNX690HD Manual

Get Kenwood DNX690HD PDF manuals and user guides View all Kenwood DNX690HD manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX690HD manual content summary:

  • Kenwood DNX690HD | Instruction Manual - Page 1
    Music CD DVD VIDEO SIRIUS XM BT Audio Pandora aha Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System. For your records Record the serial number, found on the
  • Kenwood DNX690HD | Instruction Manual - Page 2
    67 SIRIUS XM Setup 68 Bluetooth Control 74 Registering And Connecting Bluetooth Unit 74 Playing Bluetooth Audio Device________ 76 Using Hands-Free Unit 77 Smartphone Link 82 Hands-Free Setup 84 Setting Up 86 Monitor Screen Setup 86 View Camera Control 87 System Setup 87 Display
  • Kenwood DNX690HD | Instruction Manual - Page 3
    purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • You can select language to display menus, audio file tags, etc. See Language setup (P.89). • The Radio Data System or Radio Broadcast Data System feature won't work where the
  • Kenwood DNX690HD | Instruction Manual - Page 4
    of the SD card slot. Receives the remote control signal. A slot to insert a disc media. An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. * The display may not switch to the Graphic Equalizer screen in some conditions
  • Kenwood DNX690HD | Instruction Manual - Page 5
    106).* 8 TEL • Displays the Hands Free screen (P.74). • Pressing for 1 second displays the Voice Recognition screen. (P.82) 9 microSD card slot A microSD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. * The display may not
  • Kenwood DNX690HD | Instruction Manual - Page 6
    > button for 1 second. If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.11). 10 Return to the Top page Basic Operations Initial setup Perform this setup when you use this unit first time or when you reset the unit (P.119). 1 Set each
  • Kenwood DNX690HD | Instruction Manual - Page 7
    Press the button. USB device 1 Connect the USB device with the USB cable. The unit reads the device and playback starts. ●●To disconnect the device: Touch [0] on the screen and disconnect the device from the cable. iPod 1 Connect the iPod with the iPod cable. The unit reads the iPod and playback
  • Kenwood DNX690HD | Instruction Manual - Page 8
    • If [Menu] is not displayed during video/picture playback, press the button. (P.6, P.8) Top Menu screen appears. From this screen, you can perform the following functions. Function Icon Switch the audio source etc. Enter setup mode Display navigation screen Turn off all audio function
  • Kenwood DNX690HD | Instruction Manual - Page 9
    image is dispalyed, touching for at least 1 second displays the Screen Control screen.) (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. :  Displays the EXT SW Control screen. : Displays the SETUP Menu screen
  • Kenwood DNX690HD | Instruction Manual - Page 10
    details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen 1 Press the button. The navigation screen appears. Control audio from the navigation screen You can control audio sources while the navigation screen is displayed. Also, you can
  • Kenwood DNX690HD | Instruction Manual - Page 11
    the air conditioner of the vehicle. : D isplays information about the Parking Distance Sensor of the vehicle. : D isplays information about the tire pressures of the vehicle. NOTE • Displayable screens, button names, and screen names vary depending on the type of the connected iDataLink and the
  • Kenwood DNX690HD | Instruction Manual - Page 12
    screen. NOTE • Set the remote control mode switch to DVD mode before starting operation, see Switching the operation mode (P.113). • The screen shot below is for DVD. It may be different from the one for VCD. Control screen 1 Video screen 6 6 5 2 3 4 78 1 Information display Displays
  • Kenwood DNX690HD | Instruction Manual - Page 13
    played from the beginning when you play it the next time. [PBC] (VCD only) Turn Playback control (PBC) on or off. [ SETUP] Touch to display the SETUP Menu screen. See Setting Up (P.86). [ AUDIO] Touch to display the Audio Control screen. See Controlling Audio (P.100). [ EXT SW] Touch to control the
  • Kenwood DNX690HD | Instruction Manual - Page 14
    the menu keys directly on the screen when zooming. Menu Control 2 screen appears. 2 Touch the key which corresponds to desired setting item. Zoom Control screen appears. NOTE • For DVD, please refer to DVD play mode setting (P.26) to display the Zoom Control screen. 2 Perform desired operation as
  • Kenwood DNX690HD | Instruction Manual - Page 15
    ): M akes the total sound volume larger than other modes. This is effective only when you are using Dolby Digital software. Angle Mark Sets an angle mark display. ON (Default): An angle mark appears. OFF: An angle mark does not appear. Screen Ratio* Sets the screen display mode. 16:9 (Default
  • Kenwood DNX690HD | Instruction Manual - Page 16
    play a disc in [1] position. On Screen DVD Sets an on-screen display. Auto: When updated, information appears for 5 seconds. OFF (Default): Information does not appear. NOTE • [CD Read] is not available when a disc is in the unit. • You cannot play an audio file/VCD disc in the [2] position. Also
  • Kenwood DNX690HD | Instruction Manual - Page 17
    , USB device CD/Audio and Visual Files/iPod Operation Music/Video/Picture Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation mode (P.113
  • Kenwood DNX690HD | Instruction Manual - Page 18
    Top page CD, Disc, iPod, USB device Picture/video screen 9 9 10 9 Searching file area (picture/video file only) • Touch to search the next/previous file. • During slide show in USB mode, touching each area searches the next/previous music file. • Scrolling from center of display to left or right
  • Kenwood DNX690HD | Instruction Manual - Page 19
    output the sounds and images produced by the application running on your iPod touch or iPhone. In files in USB device only) During picture playback, switches to picture display. [ SETUP] Touch to display the SETUP Menu screen. See Setting Up (P.86). [ AUDIO] Touch to display the Audio Control screen
  • Kenwood DNX690HD | Instruction Manual - Page 20
    You can search a picture file (P.40). NOTE • For disc media, you can display the folder list directly by touching [ ]. Category search (USB device and iPod only) 1 Touch the desired category from the left part of the screen. Return to the Top page CD, Disc, iPod, USB device Link search (USB device
  • Kenwood DNX690HD | Instruction Manual - Page 21
    Playback starts. NOTE • For operations in the list screen, see Common Operations (P.16). The selected picture appears in full screen. See number 9-10 in USB device and iPod (P.34) for operation of picture screen. Search from album artwork (USB device and iPod only) You can search music files by
  • Kenwood DNX690HD | Instruction Manual - Page 22
    list. Selected album is played and the control screen appears. NOTE • The favorite list is played to the right starting with the selected album. • To delete the on/off. File being played, playing time code, favorite list contents, favorite list order, etc. resumes if file configuration of the
  • Kenwood DNX690HD | Instruction Manual - Page 23
    CD, Disc, iPod, USB device PANDORA® Internet Radio Operation You can listen to the PANDORA® internet radio on this unit by controlling the application installed in the iPhone or Bluetooth device. To enter PANDORA mode, touch [Pandora] icon in the Top Menu screen. NOTE • Install the latest version
  • Kenwood DNX690HD | Instruction Manual - Page 24
    perform the following functions from this screen. Device selection Bluetooth: Uses the device connected via Bluetooth for PANDORA Internet radio reception. Wired: Uses the iPhone connected via the KCA-iP202 or KCA-iP102 (optional accessory) for PANDORA Internet radio reception. NOTE • If you
  • Kenwood DNX690HD | Instruction Manual - Page 25
    " in the Google play to find and install the most current version. • For how to register the Bluetooth device (Android), see Registering the Bluetooth Unit (P.75). Content List screen 1 2 Text information screen 5 2 3 4 63 4 6 1 Content information Displays the content of the current station
  • Kenwood DNX690HD | Instruction Manual - Page 26
    [ ] in the control screen. [ ] Saves the location information. [Go!] Sets the location information at the destination and starts navigation. Return to the Top page CD, Disc, iPod, USB device USB/iPod/DivX Setup You can perform setup when using USB/ iPod/ DivX (DNX890HD/ DNX7700BT/ DNX5700BT). NOTE
  • Kenwood DNX690HD | Instruction Manual - Page 27
    Sets Wide Screen. Set [ON] (default) or [OFF]. On Screen iPod Sets how to display the information of the iPod. Auto (Default): Information appears for 5 seconds when updated. OFF: Does not display any information. * T his setting is not available when an iPod is connected. DivX(R) VOD (DNX890HD
  • Kenwood DNX690HD | Instruction Manual - Page 28
    source control screen. NOTE • Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode (P.113). • HD Radio broadcasting can be received only by the DNX890HD, DNX690HD, DNX570HD, and DNX5080EX. • HD Radio broadcasting is for North American sales area
  • Kenwood DNX690HD | Instruction Manual - Page 29
    call 1-877-438-9677 NOTE • Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode (P.113). • To use SIRIUS XM radio, the optional accessory is necessary. • SIRIUS XM are for North American sales area only. Simple Control screen 1 2 List Control
  • Kenwood DNX690HD | Instruction Manual - Page 30
    Replay (P.68). • Tunes in by entering direct number: T ouch [ ] and enter the desired number. For details, see Direct search (P.62). HD Radio, SIRIUS XM [ SETUP] Touch to display the SETUP Menu screen. See Setting Up (P.86). [ AUDIO] Touch to display the Audio Control screen. See Controlling Audio
  • Kenwood DNX690HD | Instruction Manual - Page 31
    store the station or channel for 2 seconds until a beep sounds. 3 Touch [ ] in the control screen. The multi function menu appears. 4 Touch [AME] in the multi function menu. 5 Touch [1] or [¡] in the sub function menu. Auto memory starts. Selecting Operation Preset select You can list and select
  • Kenwood DNX690HD | Instruction Manual - Page 32
    a Radio Broadcast Data System that includes the TI information. 1 Touch [ ] in the control screen. The multi function menu appears. 2 Touch [TI] in the multi function menu. Traffic information mode is set. When the traffic bulletin starts The Traffic Information screen appears automatically. Return
  • Kenwood DNX690HD | Instruction Manual - Page 33
    called "Tagged" in iTunes the very next time you sync your iPod to your computer. So then you just need to click and then easily buy and download the song you were tagging directly from the Apple iTunes Music Store. Registering a tag 1 Press the button instructed in each diagram for 1 second during
  • Kenwood DNX690HD | Instruction Manual - Page 34
    of the registered content starts, an Alert screen appears. Return to the Top page Radio, HD Radio, SIRIUS XM Jump Touch to display the Alert Content List screen. Ignore Touch to cancel see Multi function menu (P.58). • For how to set up the Content alert function, see SIRIUS XM Setup (P.69). 67
  • Kenwood DNX690HD | Instruction Manual - Page 35
    station. Replay time bar Display recorded capacity [ ] Listen to live. [ ] Displays a list of recorded data on a program basis. [BAND] Switches the band. 2 Touch [ ] to display a program list. SIRIUS XM Setup NOTE • Each operation in this section can be started from the Top Menu screen. For details
  • Kenwood DNX690HD | Instruction Manual - Page 36
    Lock Channel Select] in the SIRIUS XM SETUP screen. Parental Pass Check screen appears. NOTE • You need to complete Parental code (P.69) beforehand. • To delete the parental lock channel setting, touch and hold [Clear] for 2 seconds, enter the Parental code number, then touch [Enter]. 2 Enter the
  • Kenwood DNX690HD | Instruction Manual - Page 37
    . Return to the Top page Radio, HD Radio, SIRIUS XM Tune start 1 Touch [ON] or [OFF] of [Tune Start] in the SIRIUS XM SETUP screen. Turns the Tune start on or off. Default is "ON". 2 Touch [Type] to select the screen of the content you want to set up. Touching this allows you to switch among the
  • Kenwood DNX690HD | Instruction Manual - Page 38
    Searched Device List screen cannot be displayed, when the receiving source is PANDORA internet radio, aha, or Bluetooth Audio. • This unit is compatible with the Apple Easy Pairing function. When an iPod touch or iPhone is connected to this unit using Dock Connector to USB Cable, an authentication
  • Kenwood DNX690HD | Instruction Manual - Page 39
    Press the button. Return to the Top page Bluetooth Operation 2 Select a dialing method. Hands Free screen appears. NOTE • When registration of your cell-phone is completed, the phone book of the cell-phone is automatically downloaded to this unit. • Up to 600 phone numbers can be registered
  • Kenwood DNX690HD | Instruction Manual - Page 40
    may differ from those displayed on the cell-phone. • Setting the cell-phone in the private mode can disable the hands-free function. NOTE • While monitoring the camera view, this screen does not appear even if a call comes in. To display this screen, press the button or return the shift
  • Kenwood DNX690HD | Instruction Manual - Page 41
    (Short Message Service) 1 Touch or [ ] in the Hands Free screen. The phone numbers list appears. 2 From the phone numbers list, select a phone number to send a SMS. The selected SMS message appears. [ ] Indicates the number of unread SMS messages. [ ] Indicates the number of read SMS messages
  • Kenwood DNX690HD | Instruction Manual - Page 42
    . Smartphone Link You can receive Garmin's traffic information and weather forecast by connecting your Android smartphone in which the Smartphone Link application is installed to this unit. 1 Press the button. Press for 1 second Press for 1 second Voice Recognition screen appears. 2 Start
  • Kenwood DNX690HD | Instruction Manual - Page 43
    screen. Hands-free SETUP screen appears. 84 Bluetooth HF/Audio Select the speakers to output the sound from cell-phone (such as phone call voice and ringing tone) and Bluetooth audio player. Front Only (Default): Outputs from the front speakers. All: Outputs from all speakers. Auto Response*1 Sets
  • Kenwood DNX690HD | Instruction Manual - Page 44
    this function only when you have applied the parking brake. • The image quality can be set for each source. Bright/Tint/Color/Contrast/Black/ Sharpness Adjusts each item. Dimmer Select dimmer mode. ON: The display and buttons dim. OFF: The display and buttons do not dim. SYNC (Default): Turns the
  • Kenwood DNX690HD | Instruction Manual - Page 45
    Language setup 1 Touch [SET] of [Language] in the User Interface screen. Language Setting screen appears. 2 Set each item as follows. Return to the Top page Setting Up Touch panel adjustment 1 Touch [Touch] in the System Menu screen. Touch Panel Adjustment screen appears. 2 Follow the instruction
  • Kenwood DNX690HD | Instruction Manual - Page 46
    ] in the System Menu screen. SETUP Memory screen appears. 2 Follow the instruction on the screen. SW Name Sets the name of the external device. Output Pattern Sets the power signal output mode among "Pulse"/"Level". Default is "Pulse". You can set to turn output on/off each time the button on the
  • Kenwood DNX690HD | Instruction Manual - Page 47
    the position of the monitor. 1 Touch [Angle] in the Display Menu screen. Angle setup screen appears. 2 Select a below number that represents your desired angle setting. Panel color coordinate You can set the screen and button illumination color. The selectable items differ depending on the unit
  • Kenwood DNX690HD | Instruction Manual - Page 48
    and set it for the background image. Before operating this procedure, it is necessary to connect the device which has the image to load. 1 Touch [Background] in the Display Menu screen. Background screen appears. 2 Touch [STANDBY]. 3 Touch [Memory] of [User Background]. User Background File Select
  • Kenwood DNX690HD | Instruction Manual - Page 49
    only when the parking brake is on and "Front Camera" is set to [ON]. *4 [ TEL Key Longer than 1 Second] must be set to "R-CAM". See User interface (P.88) Software Information Check the software version of this unit. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch
  • Kenwood DNX690HD | Instruction Manual - Page 50
    on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Source]. AV-IN1 Name/AV-IN2 Name*2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port. Default is "VIDEO". *1 T his item can be set when in STANDBY source and also the iPod is disconnected
  • Kenwood DNX690HD | Instruction Manual - Page 51
    equalizer (P.105) • Performing zone control (P.107) • Set sound effect (P.108) • Set listening position (P.110) Setting Audio 1 Touch [Audio SETUP]. Audio SETUP screen appears. 100 See the following section for each setting. • Set up speakers (P.101) • Set up your car type (P.102) • Select
  • Kenwood DNX690HD | Instruction Manual - Page 52
    Select the speaker locations using [3]. Return to the Top page Audio Setting Up DSP select You can select whether using DSP (Digital Signal Processor) System. 1 Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen. Front Speaker Select the location from "Door"/ "On Dash"/ "Under
  • Kenwood DNX690HD | Instruction Manual - Page 53
    1 Touch [EQ] in the Equalizer screen. 2 Touch the screen and set the Graphic Equalizer as desired. Equalizer screen appears. Operation Controlling EQ curves 1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], [Powerful], [iPod], and [User]. Gain level (light green boxed area
  • Kenwood DNX690HD | Instruction Manual - Page 54
    [Easy], [Top40], [Jazz], and [User] using [2] and [3]. Controlling equalizer manually 1 Touch [Tone] in the Equalizer screen. 2 Set each item as follows. Controlling SystemQ-Ex Selects items to be adjusted for tone curve setup. If you turn off this setting, only Level can be set up for tone curves
  • Kenwood DNX690HD | Instruction Manual - Page 55
    • Set space enhancer (P.108) • Set highway sound (P.109) • Set up elevation (P.109) • Set up realizer or supreme (P.110) Highway sound setting You can boost a certain range of sound that becomes hard to hear due to road noise. 1 Touch [Highway Sound] in the Sound Effect screen. Highway Sound screen
  • Kenwood DNX690HD | Instruction Manual - Page 56
    Setting Up Realizer and Supreme You can restore the sound lost due to audio compression to a realistic sound. 1 Touch the screen in the Sound Effect screen. Listening Position You can adjust the sound works on DVD MEDIA, USB and iPod sources. Position screen speakers. A sound image will be shifted
  • Kenwood DNX690HD | Instruction Manual - Page 57
    number/number Music CD Track number/Play time Audio files Folder number/File number Radio Frequency value HD Radio tuner Frequency value/Channel number SIRIUS XM Channel number 2 Enter the number of the content you want to play using the numeric keypad. 3 For DVD or VCD, press the button
  • Kenwood DNX690HD | Instruction Manual - Page 58
    the selected function. 8 ROUTE M AUD Screen mode changes each time you press this key during video playback. DVD Returns to the DVD top menu. NAV Displays Route Option menu. 114 Return to the Top page Remote Controller Operation Key Name 9 VOICE 10 VIEW 11 MAP DIR 12 5/∞ 13 2/3 14 Numeric
  • Kenwood DNX690HD | Instruction Manual - Page 59
    condition is bad. Solution Pull out the antenna all the way. Connect the wire correctly. See "Connection" in the Quick Start Guide. Set "CD Read" to "1". See Disc setup (P.30). Turn off the random function. Turn off the PBC function. Clean the disc. See Precautions on handling discs (P.4). Try
  • Kenwood DNX690HD | Instruction Manual - Page 60
    not support the connected iPod model. Confirm that the software for the iPod is the latest version. See Connectable iPod/iPhone (P.122). Turn on power again after warming your car interior. Start the Aha application of the your device. Confirm that the Aha application is the latest version. SIRIUS
  • Kenwood DNX690HD | Instruction Manual - Page 61
    online manual about audio files is put on the site, www.kenwood.com/cs/ce/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well. Return to the Top page Appendix ■■Video files • MPEG1
  • Kenwood DNX690HD | Instruction Manual - Page 62
    touch (1st generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone NOTE • For the conformity information on iPod/iPhone software, access www.kenwood.com/cs/ce/ipod/. • By connecting your iPod/iPhone to this unit with an optional accessory iPod connection cable (KCA-iP202 or KCA-iP102
  • Kenwood DNX690HD | Instruction Manual - Page 63
    is selected now. ■■iPod MUSIC Identifies the music file. VIDEO Identifies the video file. RDM The random function screen for the image. The left mark indicates that a wide image picture (16:9) is displayed on a standard TV set screen (4:3) with a black band at both the top and bottom of the screen
  • Kenwood DNX690HD | Instruction Manual - Page 64
    -Romance 126 Code rn ro ru rw sa sd sg sh si sk sl sm sn so sq File System : FAT 16/ 32 Maximum Power Supply Current DNX890HD, DNX7700BT iPod/iPhone: DC 5 V 1 A USB: DC 5 V 500 mA DNX690HD, DNX570HD, DNX5080EX, DNX5700BT : DC 5 V 1 A D/A Converter : 24 Bit Audio Decoder : MP3/ WMA/ AAC/ WAV Video
  • Kenwood DNX690HD | Instruction Manual - Page 65
    HFP (Hands Free Profile) • SPP (Serial Port Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (Audio/Video Remote Control Profile) • PBAP (Phonebook Access Profile) • Multi Profile support • SSP (Simple Secure Pairing) ■■DSP section (DNX890HD, DNX7700BT) Graphics equalizer Band: 13 Band
  • Kenwood DNX690HD | Instruction Manual - Page 66
    ® application on your device. • iPhone/ iPod touch connected to this unit with a KCA-iP202 or KCA-iP102. Android™ • Visit the Google play and search for Pandora to install. • Bluetooth must be built in and the following profiles must be supported. - SPP (Serial Port Profile) - A2DP (Advanced Audio
  • Kenwood DNX690HD | Instruction Manual - Page 67
    Top page Appendix DNX890HD/ DNX690HD/ DNX570HD/ DNX5080EX: ■■FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose
  • Kenwood DNX690HD | Instruction Manual - Page 68
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
What Do You Want To Do?
Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM.
In this manual, you will learn various convenient functions of the system.
Click the icon of the media you want to play.
With one-click, you can jump to the section of each media!
iPod
USB
VCD
DVD VIDEO
Music CD
Disc Media
BT Audio
Pandora
aha
Tuner
HD Radio
SIRIUS XM
13DNX_IM366_Ref_K_En_01
(K/K2/R)
© 2012 JVC KENWOOD Corporation
DNX890HD
DNX7700BT
DNX690HD
DNX570HD
DNX5080EX
DNX5700BT
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model DNX890HD/ DNX7700BT/ DNX690HD/ DNX570HD/ DNX5080EX/ DNX5700BT
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
Before reading this manual, click the button below to check the latest edition and the
modified pages.