Kenwood DNX7100 Instruction Manual

Kenwood DNX7100 - Navigation System With DVD player Manual

Get Kenwood DNX7100 - Navigation System With DVD player PDF manuals and user guides
UPC - 019048170972
View all Kenwood DNX7100 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX7100 manual content summary:

  • Kenwood DNX7100 | Instruction Manual - Page 1
    GPS NAVIGATION SYSTEM DNX7100 DNX710EX INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System. For your records Record the serial number, found on
  • Kenwood DNX7100 | Instruction Manual - Page 2
    How to read this manual 4 Safety precautions 6 Notes 7 Navigation Control 16 Using the Navigation System 16 Accessing the SD Memory Card Insertion Slot 16 Watching DVD/VCD 17 Functions During the Playback Screen 17 Functions When Displaying the Easy Control Panel 18 Functions
  • Kenwood DNX7100 | Instruction Manual - Page 3
    Setup 86 Zone Control 86 Remote Controller 88 Battery installation 88 Remote Controller mode switch 88 Common operations (AUD mode) 89 DVD/VCD/CD/Audio files (DVD mode) 90 TV (TV mode) 91 Radio (AUD mode) 92 NAVI (NAVI mode) 92 Help? Troubleshooting Help? Error DVD language codes
  • Kenwood DNX7100 | Instruction Manual - Page 4
    The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. Manual Memory Stores the current receiving
  • Kenwood DNX7100 | Instruction Manual - Page 5
    English 5
  • Kenwood DNX7100 | Instruction Manual - Page 6
    wiring work to professionals. 2CAUTION To prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply. • Do not install Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed
  • Kenwood DNX7100 | Instruction Manual - Page 7
    The latest iPod software updater can be downloaded from the Apple Computer web site. The character set supported by this unit is ISO088591. Characters that cannot be displayed correctly appear as "*". By connecting your iPod to this unit with an optional accessory iPod connection cable (KCA-iP300V
  • Kenwood DNX7100 | Instruction Manual - Page 8
    refer to your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.) List of playable discs Disc Standard Support types DVD DVD Video ‡ DVD Audio × DVD-R ‡ Remark MP3/WMA/AAC/JPEG/ DVD-RW DVD+R ‡ MPEG/DivX Playback Multi-border/Multisession/ ‡ (Playback
  • Kenwood DNX7100 | Instruction Manual - Page 9
    Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 1 4 2 6 2 3 1 5 4 DVD disc marks Symbol Description ALL Indicates a region number. The discs with this mark can be played with any DVD
  • Kenwood DNX7100 | Instruction Manual - Page 10
    of files per folder: 255 Maximum number of files per playlist: 7000 (USB device) • Playable USB device USB mass storage class, iPod with KCA-iP300V • Playable USB device file system FAT16, FAT32 • About the Connection of the USB device If an extension cable is needed for USB device connection, usage
  • Kenwood DNX7100 | Instruction Manual - Page 11
    > (page 10). About USB device • Install the USB device in the place where it device via a USB hub. • Take backups of the audio files used with this containing DVD standard signals and the other surface containing music CD may not be displayed or operated (e.g.: rotation display) properly. Extensions
  • Kenwood DNX7100 | Instruction Manual - Page 12
    is pressed more than 1 second. E Turns power ON/OFF Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. E Switches to the Navigation system Press the button to switch the display to the navigation system screen. 12 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 13
    a video disc, select the desired item. ⁄ • See (page 8) for a list of supported discs and formats. Removing a disc Press [0] (Eject) button to open the operation panel. After removing the disc, press [0] (Eject) button to close the operation panel. Next page 3 English 13
  • Kenwood DNX7100 | Instruction Manual - Page 14
    screen switches in the following order each time you press the button. Picture & Easy Control Panel Source Control Screen Picture Panel (OFF) The following buttons are always displayed on the source control screen. 6 1 Displays the Source Select screen. (page 53) 1 2 Returns to the Source
  • Kenwood DNX7100 | Instruction Manual - Page 15
    the following order each time you press the button. Built-in Disc Player TV Video iPod Rear View Camera Navigation You can also turn off the video display by pressing the button longer than 1 second. When you press the button again, the previous video display comes back on. ⁄ • You cannot switch to
  • Kenwood DNX7100 | Instruction Manual - Page 16
    SD Memory Card Insertion Slot An SD memory card is used to upgrade the map. 1 Press [NAV] to turn the power on NAV Press several times until the navigation screen appears. NAV 2 Press [0] to close the panel NAV 2 Setting the navigation system function Touch the navigation system button displayed
  • Kenwood DNX7100 | Instruction Manual - Page 17
    (page 88). Functions During the Playback Screen Basic functions are available even when the playback screen is displayed. Display the playback screen. VCD playback screen 8 11 12 13 9 10 or NAV DVD playback screen 1 2 3 5 6 4 7 1 Title Number Display
  • Kenwood DNX7100 | Instruction Manual - Page 18
    or pauses. 6 Displays the Screen Control screen. Refer to (page 57). 7 Displays the external device control screen. Refer to (page 54). ⁄ • The Easy Control Panel is hidden when you touch a central part of the monitor. 18 DNX7100 NAV 10 11
  • Kenwood DNX7100 | Instruction Manual - Page 19
    discs (Effective only when the PBC function is off ) p Title Number Display (during DVD play) q Chapter/Scene/Track Number Display w Play Mode Display e Play Time Display r Volume Label Display When is appeared, the text display is scrolled by pressing it. t Function Indicator y Appears when a disc
  • Kenwood DNX7100 | Instruction Manual - Page 20
    select the DVD menu. q Switches the subtitle language. (during program playback only) w Switches the voice language. (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control. Zoom Control ⁄ • To cancel Highlight Control, press [V.SEL] button. 2 Select Disc
  • Kenwood DNX7100 | Instruction Manual - Page 21
    Zoom Control Displays an enlarged VCD screen. 1 Display the Zoom Control screen 1 2 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Clears the Zoom Control button. Direct Search You can search for a DVD/VCD chapter, scene or track by entering its number. 1 Select
  • Kenwood DNX7100 | Instruction Manual - Page 22
    Displays the Screen Control screen. (page 57 for the ) 9 Displays the external device control screen. See (page 54). ⁄ • The Easy Control Panel is hidden when you touch a central part Selects a music. When you continue to touch button: Fast
  • Kenwood DNX7100 | Instruction Manual - Page 23
    Random Play (to play music in random order). q Switches the number of lines displayed in the Information Display. w Switches the play time display between Track, Disc, and Disc Remaining Time. e Track (Music) Number Display r Play Mode Display t Play Time Display y Function Indicator u Appears when
  • Kenwood DNX7100 | Instruction Manual - Page 24
    You can search for folders and Audio files through a hierarchy. See (page 26). . Displays music information (such as Tag and content property) of Audio file being played. P Displays the external device control screen. See (page 54). 24 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 25
    button display. Y Starts or stops Scan Play (that plays the beginning of each music one after the other). U Repeats to play (the present music). I Starts or stops Random Play (to play music in random order). O Switches the number of lines displayed in the Information Display. : Disc Number Display
  • Kenwood DNX7100 | Instruction Manual - Page 26
    Music Disc & Audio File Listening Set Disc Name Assigns a name to a CD. 1 Play a CD you wish to name 2 Start Name set Folder Select (Function of when touched, and the Audio file is played. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Returns to the original screen. 26 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 27
    of Disc Changer) Displays a list of discs in the Disc changer and allows you to select the disc to listen. 1 Start Direct Select 2 Enter a track number  1 1 disc or a track when its number is entered. During play on the built-in disc player 1 Select the Direct Search mode 4 5 6 GHI JKL MNO
  • Kenwood DNX7100 | Instruction Manual - Page 28
    30) DivX: Sub=Off, Audio 1/1 MPEG: Not effective 6 Information Display Button Area 1 2 3 3 4 4 5 1 Switches the source. 2 Stops playing. 3 Selects a folder. 4 Selects a file. 5 Plays or pauses. ⁄ • The Easy Control Panel is hidden when you touch a central part of the monitor. 28 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 29
    number of lines displayed in the Information Display. e Folder and File Number Display r Play Mode Display t Play Time Display 8 Switches the button display. 18 i Displays information of file being played. a Displays the external device control screen. See
  • Kenwood DNX7100 | Instruction Manual - Page 30
    and devices according to hierarchy. 1 Start Folder Select 2 Adjust the video display 2 3 1 4 1 Reverses the picture horizontally. 2 Rotates counter clockwise. 3 Rotates clockwise. 4 Ends Picture Control. 2 Select a file 12 3 4 1 5 1 Scrolls the list. 2 Lists folders and Video files
  • Kenwood DNX7100 | Instruction Manual - Page 31
    method of receiver button operations, refer to (page 12). • Set the remote controller mode switch to "AUD" mode before starting operation, refer to (page 88). Functions When Displaying the Easy Control Panel Displays a floating control panel in
  • Kenwood DNX7100 | Instruction Manual - Page 32
    (page 33). t Displays Radio Text screen. See (page 34). y Displays the external device control screen. See (page 54) The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting
  • Kenwood DNX7100 | Instruction Manual - Page 33
    if you do not operate within 10 seconds. Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Store in memory 2 Select a station 2 3 1 1 4 1 Scrolls the list. 2 Memorized stations are displayed. Touch to tune in. 3 Switches the list
  • Kenwood DNX7100 | Instruction Manual - Page 34
    You can display the radio text. (Only when receiving the FM broadcast). 1 Select a station 2 Display the radio text 2 Start Name set 3 Enter the name See (page 56) for information on how to enter a name. 4 End Name set 1 2 2 3 1 Selects the Program Service Name, Title & Artist
  • Kenwood DNX7100 | Instruction Manual - Page 35
    is switched to the traffic information and it is displayed automatically. 1 Set the Traffice information mode Search for Program Type A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode 2 Select a Program Type When the traffic bulletin
  • Kenwood DNX7100 | Instruction Manual - Page 36
    the next music/video. 2 Backward music/video search area Selects the previous music/video. 3 Information display button area The information is displayed for 5 seconds. ⁄ • Remove all accessories such as headphone before connecting an iPod. You may not be able to control the iPod if you connect
  • Kenwood DNX7100 | Instruction Manual - Page 37
    Functions while Displaying the Control Screen Switches to control screen to use various playback functions. 7 Repeats to play (the preset files or data). 8 Starts or stops Random play.* 9 Total number of music in the iPod and the music number display p Play Mode Display q Play Time Display 12 w
  • Kenwood DNX7100 | Instruction Manual - Page 38
    iPod Control iPod List Lists and searches music/video contained in the iPod. 1 Display the iPod List 2 Select music/video 12 3 4 1 5 1 Switches list page. 2 Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by
  • Kenwood DNX7100 | Instruction Manual - Page 39
    control screen. Refer to (page 57). 6 Displays the external device control screen. See (page 54). ⁄ • The Easy Control Panel is hidden when you touch a central part of the monitor. NAV 11 12 13 1 2 3 3 4 4 5 6 7 8 9 10 1 Music
  • Kenwood DNX7100 | Instruction Manual - Page 40
    (page 41). y Displays the list of category. Refer to (page 40). u Displays information screen of music being played. i Displays the external device control screen. See (page 54). ⁄ * Disabled during play list mode. 1 1 Returns to the
  • Kenwood DNX7100 | Instruction Manual - Page 41
    to hierarchy. 1 Start Folder Select 2 Select music 12 1 3 4 5 6 1 Scrolls the list. 2 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Displays the currently playing file. 6 Returns to the
  • Kenwood DNX7100 | Instruction Manual - Page 42
    43 for the ) 5 Displays the Screen Control screen. (page 57 for the ) 6 Displays the external device control screen. See (page 54). ⁄ • The Easy Control Panel display is hidden when you touch a central area of the monitor. 42 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 43
    Switches to control screen to use various playback functions. 7 Indicates current Seek mode. 8 Memory Number Display 9 Channel Number Display 10 p When to buttons appear, you can recall channels on memory. For memory of broadcasting stations, see (page 44) or
  • Kenwood DNX7100 | Instruction Manual - Page 44
    a band you wish to store in memory Manual Memory Stores the current receiving channel in memory. 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory number appears. Preset Select Lists and selects
  • Kenwood DNX7100 | Instruction Manual - Page 45
    stations are displayed. Touch to Select the Direct Search mode 4 5 6 GHI JKL MNO 7PQRS CLEAR 1+ 8TUV 0 9WXYZ DIRECT # BS R.VOL  AT T 3 Enter the channel number  1 1 4GHI T When you enter a channel number, signal reception starts. Example: When you receive Channel 06 0 6MNO ⁄ •
  • Kenwood DNX7100 | Instruction Manual - Page 46
    > (page 54) 3 Displays the Screen Control screen. (page 57 for the ) ⁄ • The Easy Control Panel display is hidden when you touch a central area of the monitor. NAV 1 1 Displays the external device control screen. See (page 54) 46 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 47
    Satellite Radio Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only) Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. NAV Functions
  • Kenwood DNX7100 | Instruction Manual - Page 48
    Satellite Radio Control (North American sales area only) 6 Switches the Seek mode. SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other. 7 Switches the number of lines displayed in the Information Display. 8 Indicates current Seek mode Channel Search
  • Kenwood DNX7100 | Instruction Manual - Page 49
    Channel Memory Stores the current receiving channel in memory. 1 Select a channel you wish to store in memory  : Press for # seconds. Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Store in memory Displays the Direct Search screen. 2 Enter
  • Kenwood DNX7100 | Instruction Manual - Page 50
    Device Power Supply Control> (page 54) ⁄ • The Easy Control Panel display is hidden when you touch a central area of the monitor. 50 DNX7100 NAV 1 2 4 4 3 5 6 7 8 1 Displays information concerning music being played. Switches between Station Name and Song Title display modes. 2 Switches
  • Kenwood DNX7100 | Instruction Manual - Page 51
    program only. Analog: Receives the analog program only. q Displays the tuned in music information. w Displays the external device control screen. Refer to (page 54). ⁄ • [SCRL] button is not displayed when there is no text information. The mode is switched in
  • Kenwood DNX7100 | Instruction Manual - Page 52
    Radio Control  : Press for # seconds. Auto Memory Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Select the Auto Memory mode
  • Kenwood DNX7100 | Instruction Manual - Page 53
    display. 3 Displays the external device control screen. See (page 54). 4 Displays the Hands-Free Control screen. See (page 58). ⁄ • The displayed source depends on the type of device connected. In addition, you cannot press the button
  • Kenwood DNX7100 | Instruction Manual - Page 54
    . 2 Returns to the original screen. ⁄ • You must connect a commercially available relay unit in order to use this function. Connect the external device to be controlled to that relay unit. • Refer to (page 83) for information on setting the power on or off specification. 54 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 55
    system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . English 55
  • Kenwood DNX7100 | Instruction Manual - Page 56
    you erase a character, locate the cursor on it and touch this button. 3 Enters characters. 4 Scrolls up or down the character button display. 5 Exits the Character Entry mode and returns to the previous screen. ⁄ • You can enter characters only after you have applied the parking brake. 56 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 57
    4 4 5 5 7 1 Brightness Control 2 Tint Control Displayed for an NTSC system image on TV, Video, iPod or Rear View Camera. 3 Color Control Displayed on the TV, Video, iPod or Rear View Camera screen only. 4 Contrast Control 5 Black Level Adjustment 6 Dimmer Mode Setup "SYNC": Turning the Dimmer
  • Kenwood DNX7100 | Instruction Manual - Page 58
    read the instruction manual of the Bluetooth Hands Free Box as well. Control Screen Function Displaying the control screen and using various functions. 1 Display the control screen NAV Press several times until the Control Screen appears. 2 Display the source select screen 1 1 Displays the status
  • Kenwood DNX7100 | Instruction Manual - Page 59
    are disabled for safety's sake. The buttons associated with the disabled functions become ineffective if pressed. • When the Hands-Free Control screen appears, the name of the connected cell-phone is displayed for 5 seconds. • * Since the number of steps of the control unit is different from that of
  • Kenwood DNX7100 | Instruction Manual - Page 60
    Returns to the Hands-Free Control screen. 2 Select the initial character of a person name in memory ⁄ • Only the phone numbers can be registered for Quick Dialing. Therefore, the destination subscriber name and others are not displayed during dialing. 60 DNX7100 The Phone Book List screen appears
  • Kenwood DNX7100 | Instruction Manual - Page 61
    the Hands-Free Control screen. 3 Select a destination you wish to call 6 End the call  : Press for # seconds. The previous screen reappears. ⁄ • To use the Phone Book, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Hands Free Box
  • Kenwood DNX7100 | Instruction Manual - Page 62
    Hands Free Unit Control Redialing You can redial, one of the last 10 phone numbers that you have called or received. 1 Display the Search for Outgoing Calls or Incoming list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory. 62 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 63
    Sets the beep of the incoming call. ( "On") "On": Beep is heard. "Off": Beep is canceled. 4 Displays the Phone Select screen. 5 Displays the Phone Delete screen. 6 Returns to the Hands-Free Control screen. ⁄ • Either the time interval for automatic answer set on this unit or the time interval set on
  • Kenwood DNX7100 | Instruction Manual - Page 64
    Hands Free Unit Control Deleting the Hands-Free Phone You can cancel a registration of Hands-Free phone. 1 Display the Hands-Free Set Up screen ⁄ • The Phone Book, outgoing call list, and incoming call list are deleted together with the deleted Hands-Free phone. 2 Display the Phone Delete list
  • Kenwood DNX7100 | Instruction Manual - Page 65
    English 65
  • Kenwood DNX7100 | Instruction Manual - Page 66
    receiver parameters. Setup Menu Displays the Setup menu to set various functions. 1 Display the control screen NAV Press several times until the control screen appears. 2 Display the SETUP Menu Audio Setup You can setup a speaker network, etc. 1 Display the Audio SETUP screen Touch [Audio SETUP
  • Kenwood DNX7100 | Instruction Manual - Page 67
    than "Through") 8 Returns to the original screen. DVD Setup You can set up the DVD play. 1 Display the DVD SETUP screen Touch [DVD SETUP] in the SETUP Menu (page 66). 2 Setup each item 1 2 3 4 5 1 Selects a disc menu language.*1 (See , page 68) 2 Selects a subtitle language.*1 (See
  • Kenwood DNX7100 | Instruction Manual - Page 68
    the language item to set Refer to (page 67) and select [Menu Language], [Subtitle Language] or [Audio Language]. 2 Display the Language SETUP screen 2 1 3 4 5 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1 screen. 3 Sets the original audio language
  • Kenwood DNX7100 | Instruction Manual - Page 69
    clear the code number by pressing the Reset button. 3 Display the Parental Level SETUP screen Refer to (page 67) and touch [Parental Level]. 2 1 3 4 5 1 Enters a code number. 2 Cancels the current setup and returns to the DVD SETUP 2 screen. 3 Indicates the present parental lock level
  • Kenwood DNX7100 | Instruction Manual - Page 70
    in the SETUP Menu (page 66). 1 2 1 Displays the registration code. 2 Returns to the original screen. ⁄ • When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as the one above. Otherwise the file may not be able to play with this unit. Remaining number of
  • Kenwood DNX7100 | Instruction Manual - Page 71
    set while the iPod is connected. 1 2 3 4 5 1 Turns the key touch tone On or Off. ( On) 2 Allows scrolling of text display on the Source Control screen. ( Auto) "Auto": Scrolls the screen automatically. "Manual": Allows you to scroll the screen manually. 3 Selects a remote control signal. ( On) When
  • Kenwood DNX7100 | Instruction Manual - Page 72
    an image signal is entered via the AV INPUT port, this image is displayed. 3 Returns to the original screen. 72 DNX7100 4 5 6 4 Selects an AV source to be output at the AV OUTPUT port. ( AV-IN) 5 Sets a method to switch to the rear view camera video display. ( Off ) "On": Switches to the rear view
  • Kenwood DNX7100 | Instruction Manual - Page 73
    66). 2 Setup each item 1 2 3 4 1 Selects the background to display. "Change": Displays images entered into this unit. Refer to (page 76) 2 Enables entering or deleting of background images into of from this unit. Press to enter the USB suspend mode, and then remove the
  • Kenwood DNX7100 | Instruction Manual - Page 74
    . ( Auto) (with the optional accessory TV tuner connected only) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. q Returns to the original screen. 8 5 Sets an on-screen display of the iPod Playback screen. ( Auto) "Auto
  • Kenwood DNX7100 | Instruction Manual - Page 75
    the list. 4 Load the image Rotation Angle Select/Memory 10:10 5 Cancel 4 4 Background Delete Deletes the background image. 1 Display Delete Image Select screen 2 Select the image to be deleted Background Delete 10:10 1 Cancel aaaaa Enter 4 Rotates the image. 5 Returns to the Picture
  • Kenwood DNX7100 | Instruction Manual - Page 76
    Background Change 10:10 Default Cancel Enter 1 1 Returns to the original screen. 3 Adjust the Touch panel 2 3 Follow the instruction on the screen and touch the center of . 2 Cancels the adjustment and returns to the Touch Panel Adjust screen. 3 Resets to the initial status. 76 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 77
    display 2 Adjusts hours. 3 Adjusts minutes. 4 Sets "00" minute. Setup examples: 3:00~3:29 \ 3:00 3:30~3:59 \ 4:00 5 Sets the clock time in synchronization with the time data sent from the RDS station. ( Off ) When turned "On", the synchronized mode starts and the clock cannot be adjusted manually
  • Kenwood DNX7100 | Instruction Manual - Page 78
    , picture quality and the screen mode of the monitor. 1 Displaying the Monitor SETUP screen Touch [Monitor SETUP] in the SETUP Menu (page 66). 2 Setup each item 1 2 3 4 5 1 Brightness Control 2 Contrast Control 3 Black Level Adjustment 4 Dimmer Mode Setup "SYNC": Turning the Dimmer function
  • Kenwood DNX7100 | Instruction Manual - Page 79
    Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed. • The picture qua¡lity can be set for each source. Full picture mode (FULL) Security Code Setup You can set a security code to protect your receiver
  • Kenwood DNX7100 | Instruction Manual - Page 80
    security Code If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code Input four-digit number. 4 Register your security code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code
  • Kenwood DNX7100 | Instruction Manual - Page 81
    accessory Satellite Radio connected only) 1 Display ESN Watch SETUP screen Touch [SAT ESN Watch] in the SETUP Menu (page 66). 2 Verify ESN 1 3 Enter a security Code 2 1 Displays the Electronic Serial Number. 2 Returns to the original screen. Input by four-digit number. 4 Register your security
  • Kenwood DNX7100 | Instruction Manual - Page 82
    battery, the settings can be restored. 1 Display the SETUP Memory screen Touch [SETUP Memory] in the SETUP Menu (page 66). 5 Memorizes the current settings: 1 2 3 1 Locks the Audio Set Up and AV Interface settings. When Lock is selected, you cannot set the Audio SETUP and AV Interface settings. 2
  • Kenwood DNX7100 | Instruction Manual - Page 83
    1 Display the EXT SW SETUP screen Touch [EXT SW SETUP] in the SETUP Menu (page 66). 2 Perform EXT SW Setup Setting EXT SW Control 1 (EXT SW1) 1 2 3 4 1 Sets the name of the external device. See (page 56) for information on how to enter the name. 2 Sets the power signal output mode
  • Kenwood DNX7100 | Instruction Manual - Page 84
    Audio Control Audio Control Menu Displays the Audio Control menu to set the sound effect function of this unit. 1 Display the control screen Audio Control You can adjust the front/rear and right/left audio balance. 1 Display Audio Control NAV Press several times until the control screen appears.
  • Kenwood DNX7100 | Instruction Manual - Page 85
    to "+18". See the catalog or instruction manual of power amplifier. Equalizer Control You can set up the equalizer. 1 Display Equalizer Control Touch [Equalizer] in the Audio Control Menu (page 84). 2 Display the Equalizer screen 1 2 3 4 1 Selects an equalizer curve type. You can select any of
  • Kenwood DNX7100 | Instruction Manual - Page 86
    Audio Control Tone Setup You can set a Tone curve. 1 Display the Tone screen Zone Control You can set the front and rear audio source. 1 Display Zone Control See (page 85). 2 Set the Tone 5 1 6 2 7 3 8 4 9 1 Bass adjustment items are displayed. 2 Middle adjustment
  • Kenwood DNX7100 | Instruction Manual - Page 87
    terminal is switched depending on the front sound source. 3 Switches the front and rear audio sources. (This button appears when the Zone function is On rear audio sources. 4 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.) 5 Returns to the original screen.
  • Kenwood DNX7100 | Instruction Manual - Page 88
    switched when controlling TV. NAVI mode This is switched when controlling Navigation unit. O ⁄ • The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". • When controlling a player that is not integrated in the unit, select "AUD" mode. 88 DNX7100
  • Kenwood DNX7100 | Instruction Manual - Page 89
    MENU ZOOM OUT IN O ENTER O DISP V.SEL  POSITION AUD • DVD • • Volume control Adjusts the volume. VIEW MAP DIR  O FM+ D O O O AM−  Y 1 DISP V.SEL  POSITION AUD • DVD • TV• Display angle Switches the display angle each time it is pressed. O MODE/TOP MENU FNC/MENU/PBC AUDIO
  • Kenwood DNX7100 | Instruction Manual - Page 90
    this button switches the features that can be searched directly. DVD Title number Chapter number Play time Item number* Cancel * You may not be able to use this function with some discs or scenes. 90 DNX7100 O O CD Track number Play time Cancel Audio files Folder number File number Cancel
  • Kenwood DNX7100 | Instruction Manual - Page 91
    DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD. O ENTER O O • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR FM+ ANGLE O SUBTITLE Switches the subtitle language. O NAVI MODE/TOP MENU FNC
  • Kenwood DNX7100 | Instruction Manual - Page 92
    Remote Controller Radio (AUD mode) Band switching Switches to bands received by the unit.  O FM+ D O O O AM−  Y 1 1 2ABC  ANGLE ZOOM 3 DEF O VOL O 2 ZONE Station selection Switches to broadcast stations received by the unit. VIEW MAP DIR  O FM+ D O O O AM−  Y 1 1 2ABC
  • Kenwood DNX7100 | Instruction Manual - Page 93
    Plays Voice guidance. O ENTER O O • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE O MAP DIR Switches between the heading up navigation and north up navigation map displays. O NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN
  • Kenwood DNX7100 | Instruction Manual - Page 94
    from the preout jack. Tuner source ? Radio reception is poor. ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. ✔ The antenna control wire is not connected. ☞ Connect the wire correctly, referring to the section on . Disc source ? The specified disc does
  • Kenwood DNX7100 | Instruction Manual - Page 95
    The preset broadcast station is not transmitting in the mode that was set with (page 50). ☞ Please set the receive mode setting to "Auto". ✔ In digital AM broadcasting, receive mode switches between stereo and monaural too often. ☞ Receiving condition is bad or unstable. Stereo is
  • Kenwood DNX7100 | Instruction Manual - Page 96
    other than USB. Remove the USB device. Authorization Error: Connection to the iPod has failed. ➡ Remove the iPod and then reconnect it. The unit does not support the iPod. ➡ Refer to (page 7). Update your iPod: The iPod's software is an older version
  • Kenwood DNX7100 | Instruction Manual - Page 97
    DVD Language Codes Code Language Code aa Afar is ab Abkhazian it af Afrikaans ja am Amharic hr Croatian ro hu Hungarian ru hy Armenian rw ia Interlingua sa ie Interlingue sd ik Inupiak sg id Indonesian sh Language Icelandic Italian Japanese Javanese Georgian Kazakh
  • Kenwood DNX7100 | Instruction Manual - Page 98
    96 kHz) Dynamic Range : 98 dB (DVD-Video 96 kHz) Disc Format : DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit Number : 16/ 20/ 24 bit USB interface section USB Standard : USB 1.1/ 2.0 File Sytem : FAT 16/ 32 Maximum Power Supply Current : 500 mA D/A Converter : 24
  • Kenwood DNX7100 | Instruction Manual - Page 99
    jacks) : 1 Vp-p/ 75 Ω External Audio Max Input Level (RCA jacks) : 2 V/ 25 kΩ Video Output Level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Audio section Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (4 Ω, 14.4 V, 1 % THD) : 22 W x 4 Preout
  • Kenwood DNX7100 | Instruction Manual - Page 100
    to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
GPS NAVIGATION SYSTEM
DNX7100
DNX710EX
INSTRUCTION MANUAL
©
B64-3644-10/01 (KV)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX7100/DNX710EX
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com