Kenwood DNX7100 Installation Manual - Page 10
Installing the GPS Antenna
UPC - 019048170972
View all Kenwood DNX7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the GPS Antenna GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1. Clean your dashboard or other surface. 2. Peel the backing off of the adhesive on the bottom of the metal plate (Accessory 4). 3. Press the metal plate (Accessory 4) down firmly on your dashboard or other mounting surface. You can bend the metal plate (Accessory 4) to conform to a curved surface, if necessary. 4. Place the GPS antenna (Accessory 3) on top of the metal plate (Accessory 4). Accessory 3 Accessory 4 ¤ • Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation. • The GPS antenna should be installed at a position that is spaced at least 12 inch (30 cm) from cellular phone or other transmitting antennas. Signals from the GPS satellite may be interfered with by these types of communication. • Painting the GPS antenna with (metallic) paint may cause a drop in performance. 10 | DNX7100