Kenwood DPX 302 Instruction Manual

Kenwood DPX 302 - Radio / CD Manual

Get Kenwood DPX 302 - Radio / CD PDF manuals and user guides View all Kenwood DPX 302 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DPX 302 manual content summary:

  • Kenwood DPX 302 | Instruction Manual - Page 1
    DUAL DIN SIZED CD RECEIVER DPX302 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the
  • Kenwood DPX 302 | Instruction Manual - Page 2
    Auxiliary input Setting CD Read Setting Demonstration mode Setting Basic Operations of remote control 22 Accessories/ Installation Procedure 24 Connecting Wires to Terminals 25 Installing the Escutcheon 26 Installation 27 Removing the Unit 28 Troubleshooting Guide 29 Specifications 31
  • Kenwood DPX 302 | Instruction Manual - Page 3
    the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected. ¤ • You can damage both your unit and the CD changer if you connect them incorrectly. Lens Fogging When you turn on the car heater
  • Kenwood DPX 302 | Instruction Manual - Page 4
    Notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • We recommend the use of (page 17) to prevent theft
  • Kenwood DPX 302 | Instruction Manual - Page 5
    , and your CD-R/CDRW recorder instruction manual.) About Satellite Radio tuner This unit supports Satellite Radio tuners which are released by SIRIUS and XM. Refer to the instruction manual of Satellite radio tuner. FCC WARNING This equipment may generate or use radio frequency energy. Changes or
  • Kenwood DPX 302 | Instruction Manual - Page 6
    radio (Optional accessory) Tuner or HD Radio (Optional accessory) CD External disc (Optional accessory) Auxiliary input* Auxiliary input (Optional accessory) Standby (Illumination only mode) Display "SAT" "TUNER" or "HD RADIO" "CD" "CD CH" "AUX" "AUX EXT" "STANDBY" Volume Increasing Volume Turn
  • Kenwood DPX 302 | Instruction Manual - Page 7
    [Q] button. Each time you press the button, the sound setting alternates. Sound setting Natural User memory Rock Pops Easy Top 40 Jazz Display "NATURAL" "USER" "ROCK" "POPS" "EASY" "TOP40" "JAZZ" ⁄ • User memory: The values set on the (page 7). • Change each setting value with the
  • Kenwood DPX 302 | Instruction Manual - Page 8
    Hz Reverse (180°)/ Normal (0°) -8 - ±0 (AUX: -8- +8) OFF/ON ⁄ • Volume offset: Sets each source's volume as a difference from the basic volume Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings
  • Kenwood DPX 302 | Instruction Manual - Page 9
    telephone accessory. Refer to (page 25). Switching Display Changing the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Frequency Clock Display "FREQ" "CLOCK" In CD
  • Kenwood DPX 302 | Instruction Manual - Page 10
    towards [4] or [¢]. ⁄ • During reception of stereo stations the "ST" indicator is ON. Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time you press the button, the Tuning mode alternates between the modes shown in the table below. Tuning mode Auto seek Display Operation "AUTO
  • Kenwood DPX 302 | Instruction Manual - Page 11
    mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 3 Enter the frequency Press the number buttons on the remote is displayed. When 6 stations that can be received are put in the memory Auto Memory Entry display blinks 1 time. On each band, 1 station can be put in
  • Kenwood DPX 302 | Instruction Manual - Page 12
    Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD CH" "MD CH" Disc player CD changer MD changer Pause and play Press the Control knob. Each time you press
  • Kenwood DPX 302 | Instruction Manual - Page 13
    buttons on the remote control. 2 Do Disc Search Press the [+] or [-] button. Cancelling Direct Disc Search Press the [38] button. ⁄ • Input "0" to select [REP] button. Each time you press the button, the Repeat Play alternates between the modes shown in the tables below. In CD & External disc source
  • Kenwood DPX 302 | Instruction Manual - Page 14
    button. Each time you press the button, Random Play turns ON or OFF. When the Random mode is ON, Each time you press the button, the Magazine Random Play turns ON or OFF. When the Magazine Random mode is Folder Select mode Press the [F.SEL] button. Text/Title Scroll Scrolling the displayed CD text,
  • Kenwood DPX 302 | Instruction Manual - Page 15
    ST indicator Preset station number About HD Radio • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. • With the HD Radio tuner, you can use the similar functions
  • Kenwood DPX 302 | Instruction Manual - Page 16
    applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting.) Also, the explanation for items that are not applicable ( etc.) are entered step by step.
  • Kenwood DPX 302 | Instruction Manual - Page 17
    or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "APPROVED" is displayed. Now, you can use the unit. ⁄ • When the Security Code function is activated, "CODE SET" changes to "CODE CLR". • To deactivate the Security Code function
  • Kenwood DPX 302 | Instruction Manual - Page 18
    following: • Volume • Attenuator • Selecting the source • Ejecting the disc • Turning off the power • During function control, such as the Menu System, the display stays on. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the
  • Kenwood DPX 302 | Instruction Manual - Page 19
    cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. In HD Radio mode Receive mode Setting Sets the receive mode. 1 Select the Receive mode Push the Control knob towards up or down. Select the "HDR MODE" display. 2 Enter Receive mode Press the Control knob for at
  • Kenwood DPX 302 | Instruction Manual - Page 20
    HD Radio source, including Channel name, etc. In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display "AUX OFF" "AUX ON" Setting When selecting the source there's no Auxiliary Input. When selecting the source there's Auxiliary Input. In Standby mode CD
  • Kenwood DPX 302 | Instruction Manual - Page 21
    In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards up or down. Select the "DEMO" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds,
  • Kenwood DPX 302 | Instruction Manual - Page 22
    inside the case. : This button is used when Kenwood Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. Basic operations [VOL] buttons Adjusts the volume. [SRC] button Each time you press the button, the source alternates. For
  • Kenwood DPX 302 | Instruction Manual - Page 23
    Press buttons [1] - [6] to recall preset stations. [DIRECT] button Enters and cancels the (page 11) mode. In HD Radio source [FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects
  • Kenwood DPX 302 | Instruction Manual - Page 24
    the unit. 6. Install the unit in your car. 7. Reconnect the - battery. 8. Press the reset button. 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the
  • Kenwood DPX 302 | Instruction Manual - Page 25
    the Disc changer, consult your Disc changer manual. To Kenwood disc changer/ External optional accessory Fuse (10A) FM/AM antenna input Wiring harness (Accessory1) Front left output (White) Front right output (Red) Rear left output (White)/ Sub Woofer left output (White) Rear right output
  • Kenwood DPX 302 | Instruction Manual - Page 26
    in the vehicle. Accessory2 Cutting line Accessory2 3 Fold double-sided adhesive (accessory 3) along the slit and attach it to accessory 2 cut-out against the center rib as illustrated. Use 2 pieces of accessory 3 for 1 accessory 2 cut-out. 4 Attach accessory 2 cut-out to the unit. Accessory3 26
  • Kenwood DPX 302 | Instruction Manual - Page 27
    or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory6 Installing in Japanese-Made Cars and General Motors Cars Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the
  • Kenwood DPX 302 | Instruction Manual - Page 28
    Removing the Unit Removing the Hard Rubber Frame (escutcheon) 1 Engage the catch pins on the removal tool 7 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 When the lower level is removed, remove the upper two locations. ⁄ • The frame can be
  • Kenwood DPX 302 | Instruction Manual - Page 29
    Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to Aux source. ▲ AUX is not turned on. ☞ (page 20) ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the
  • Kenwood DPX 302 | Instruction Manual - Page 30
    properly and press the reset button. NA FILE: COPY PRO: An Audio file is played with a format that this unit can't support. ➪ ---- A copy-protected file is played. ➪ ---- DEMO MODE: The Demonstration mode has been selected. ➪ The (page 21) is ON. Turn it OFF. 30
  • Kenwood DPX 302 | Instruction Manual - Page 31
    Selectivity (±400 kHz) : ≥ 80 dB Stereo separation (1 kHz) : 40 dB AM tuner section Frequency range (10 kHz space) : 530 kHz - 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dBμ (25 μV) CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 1 Bit Spindle
  • Kenwood DPX 302 | Instruction Manual - Page 32
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
DUAL DIN SIZED CD RECEIVER
DPX302
INSTRUCTION MANUAL
©
B64-3614-00/00 (KW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DPX302
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com