Kenwood DPX301 Instruction Manual

Kenwood DPX301 - DPX 301 Radio Manual

Kenwood DPX301 manual content summary:

  • Kenwood DPX301 | Instruction Manual - Page 1
    KENWOOD DUAL DIN SIZED CD RECEIVER DPX301 INSTRUCTION MANUAL Kenwood Corporation SIRIUS* READY H)@Radio® READ y ign W. Media csi Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new
  • Kenwood DPX301 | Instruction Manual - Page 2
    HD Radio Tuning Menu system 20 Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment Display Illumination Control Dimmer Switching preout Built-in Amp Setting Supreme Setting CRSC (Clean Reception System Circuit) Receive mode Setting SIRIUS ID
  • Kenwood DPX301 | Instruction Manual - Page 3
    accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
  • Kenwood DPX301 | Instruction Manual - Page 4
    made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed
  • Kenwood DPX301 | Instruction Manual - Page 5
    Refer to the instruction manual of SIRIUS Satellite radio tuner KTC-SR901/SR902/SR903 (optional accessory), when connected, for the operation method. • Refer to the sections of A models for operations. DISP FM/SCRL Reset button • We recommend the use of (page 21) to
  • Kenwood DPX301 | Instruction Manual - Page 6
    do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.) Burrs O CD storage • Do not place CDs in direct sunlight (On the seat or dashboard etc.) or
  • Kenwood DPX301 | Instruction Manual - Page 7
    files with copy protection cannot be played. • The settings of your encoding Refer to http://www.kenwood.mediamanagerjp for the Player 9 or after which applies the new functions) • Transfer bit rate: 48-192 kbps • Sampling frequency: 32, 44.1, 48 kHz Playable media • CD-ROM, CD-R, CD-RW • CD
  • Kenwood DPX301 | Instruction Manual - Page 8
    input Auxiliary input (Optional accessory) Standby (Illumination only mode) Display "SIRIUS" "TUNER" or "HD RADIO" "CD" "CD CH" "AUX" "AUX EXT" "STANDBY" Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the
  • Kenwood DPX301 | Instruction Manual - Page 9
    button once, the current sound setting is displayed. Each time you press the button, the sound setting alternates. Sound setting Natural User memory Rock Pops Easy Top 40 Jazz Display "NATURAL" "USER" "ROCK" "POPS" "EASY" "TOP40" "JAll" • User memory: The values set on the (page
  • Kenwood DPX301 | Instruction Manual - Page 10
    mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the table below. Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "SP OFF" "SP 5/4" "SP 6"9/6" "SP
  • Kenwood DPX301 | Instruction Manual - Page 11
    "P-TIME" Clock "CLOCK" In HD Radio source Information Station name Song title/ Artist name/ Album name/ Genre Frequency Clock Display "ST NAME'* "TITLE" "FRED" "CLOCK" In SIRIUS tuner source Information Channel name Song title Artist name Composer name Category name Label name Comment Band
  • Kenwood DPX301 | Instruction Manual - Page 12
    [AM] for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON control this function when (page 22) is set to "SWPRE TEL Mute The audio system automatically mutes when a wire to your telephone using a commercial telephone accessory. Refer to
  • Kenwood DPX301 | Instruction Manual - Page 13
    display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob towards [FM], it switches between the FM1, FM2, and FM3 the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control. • During reception of stereo stations the "ST" indicator is
  • Kenwood DPX301 | Instruction Manual - Page 14
    [DIRECT] button on the remote control. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] - [6]
  • Kenwood DPX301 | Instruction Manual - Page 15
    Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD CH" "MD CH" Discplayer CD changer MD changer Pause andplay Press the Control knob. Each time you press the
  • Kenwood DPX301 | Instruction Manual - Page 16
    Function of disc changer/Audio file Disc Search/Folder Search Selecting the disc set in the Disc changer or the time you press the button, the Repeat Play alternates between the modes shown in the tables below. In CD & External disc source Repeat play Track Repeat Disc Repeat (In Disc Changer
  • Kenwood DPX301 | Instruction Manual - Page 17
    • When you push the Control knob towards [►►1], the next random song starts. Function of disc changer Magazine Random Play Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time you press the button, the Magazine Random Play turns ON or OFF. When the
  • Kenwood DPX301 | Instruction Manual - Page 18
    file/External disc control features TextITitle Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob towards [FM] for at least 2 seconds. • When the (page 22) is set to OFF, the display may black out while scrolling. 18 I English
  • Kenwood DPX301 | Instruction Manual - Page 19
    Radio When you connect art HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting Select HD Radio source Press the [SRC] button. Select the "HD RADIO" display. 2 Select the HD FM band Push the Control knob towards [FM]. Each time you push
  • Kenwood DPX301 | Instruction Manual - Page 20
    Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Push the Control knob towards [-4-4I] or [►►1]. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". Select
  • Kenwood DPX301 | Instruction Manual - Page 21
    or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "APPROVED" is displayed. Now, you can use the unit. • Set the Security Code when the (page 25) is set to OFF. • You can set the Security Code with
  • Kenwood DPX301 | Instruction Manual - Page 22
    function control, such as the Menu System, the display stays on. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or light switch is turned ON. Display "DIM ON" "DIM OFF" Setting The display dims. The display doesn't dim. In Standby mode
  • Kenwood DPX301 | Instruction Manual - Page 23
    In FM reception CRSC (Clean Reception System Circuit) Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station. Display "CRSC ON" "CRSC OFF" Setting The CRSC is ON. The CRSC is OFF. In HD Radio mode Receive mode Setting Sets the receive
  • Kenwood DPX301 | Instruction Manual - Page 24
    is listed below. - CD text - Folder name/ File name/ Song title/ Artist name/ Album name - MD title -Text for the SIRIUS tuner source, HD Radio source, including Channel name, etc. In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display "AUX OFF" "AUX ON
  • Kenwood DPX301 | Instruction Manual - Page 25
    the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the
  • Kenwood DPX301 | Instruction Manual - Page 26
    01- [9] SRC Al \ 0 E ') J • KENWOOD SRC ATT I-41-41/1040-I DIRECT 0 Loading and Basic operations [VOL] buttons Adjusts,the volume. [SRC] button Each time you press the button, the source alternates. For the source alternating Do not set the remote control in hot places such as above the dashboard.
  • Kenwood DPX301 | Instruction Manual - Page 27
    , such as the procedures for Audio control and others operations. In SIRIUS tuner source [FM] button Selects the preset band. [1-440]/ buttons Direct Access Tuning> (page 14) mode. In HD Radio source [FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates
  • Kenwood DPX301 | Instruction Manual - Page 28
    Procedure Accessories 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. 7. Reconnect the 8 battery. 8. Press the reset button. AWARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short
  • Kenwood DPX301 | Instruction Manual - Page 29
    to Terminals Q., To connect the Disc changer, consult your Disc changer manual. To Kenwood disc changer/ External optional accessory AUX left input (White) AUX right input (Red) Fuse (10A) FM/AM antenna input 4- 4,4 -- Wiring harness (Accessory()) Front left output (White) Front right output
  • Kenwood DPX301 | Instruction Manual - Page 30
    Installing the Escutcheon For General Motors 1 Refer to the section
  • Kenwood DPX301 | Instruction Manual - Page 31
    Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory® Installing in Japanese-Made
  • Kenwood DPX301 | Instruction Manual - Page 32
    Removing the Unit Removing the Hard Rubber Frame (escutcheon) 1 Engage the catch pins on the removal tool© and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 When the lower level is removed, remove the upper two locations. • The frame can be
  • Kenwood DPX301 | Instruction Manual - Page 33
    Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON.  The fuse has blown. • After checking for short
  • Kenwood DPX301 | Instruction Manual - Page 34
    Troubleshooting Guide Disc source ? "AUX EXT" is displayed without achieving External disc control mode.  Unsupported disc changer is connected. 1w Use the disc changer mentioned in the (page 4) of the section on . ? The
  • Kenwood DPX301 | Instruction Manual - Page 35
    your nearest service center. The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. * Wire or insulate the speaker cable properly and press the reset button. An Audio file is played with a format that this unit can't support. COPY
  • Kenwood DPX301 | Instruction Manual - Page 36
    = 20dB) : 28 dBµ (25 µV) CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 1 Bit Spindle 100 kQ General Operating voltage (11 - 16V allowable) : 14.4 V Current consumption : 10 A Installation Size (W x H x D) : 182 x 100 x 155 mm 7-3/16 x 3-15/16
  • Kenwood DPX301 | Instruction Manual - Page 37
    that this feature is turned OFF at the time of installation or before initial use of the product. If the Demonstration mode is left in the ON position the display will change arbitrarily and the security code feature can not be accessed. Setting the Demonstration function to be OFF 1. Enter Standby
  • Kenwood DPX301 | Instruction Manual - Page 38
    rn Z E 0 0 Cil) Warranty Card llIIIIIII Gerate-Typ und Seriennummer Identification du produit Produkt navn og serie nummer Modelo y N0rnero de serie MaIli ja sarjanumero MOVTEX.0 Kai apU3µo5 of(paig Modello e numero di matricola Modell og serienummer Modelo e numero de sale Apparat typ &
  • Kenwood DPX301 | Instruction Manual - Page 39
    Warranty Period, or if you have any questions regarding the operation of the product, you should contact your KENWOOD Authorized Dealer or Authorized Service Center. If the problem or your question is not handled to your satisfaction, please contact our Customer Relations Department at the address
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

KENWOOD
DUAL
DIN
SIZED
CD
RECEIVER
DPX301
INSTRUCTION
MANUAL
Kenwood
Corporation
SIRIUS*
H)@Radio®
READY
READ
y
ign
W.
Media
csi
Take
the
time
to
read
through
this
instruction
manual.
Familiarity
with
installation
and
operation
procedures
will
help
you
obtain
the
best
performance
from
your
new
CD
-receiver.
For
your
records
Record
the
serial
number,
found
on
the
back
of
the
unit,
in
the
spaces
designated
on
the
warranty
card,
and
in
the
space
provided
below.
Refer
to
the
model
and
serial
numbers
whenever
you
call
upon
your
Kenwood
dealer
for
information
or
service
on
the
product.
Model
DPX301
Serial
number
US
Residence
Only
Register
Online
Register
your
Kenwood
product
at
www.kenwoodusa.com
©
B64-3285-00/00
(KW)