Kenwood KDC-108 Instruction Manual - Page 10
Function settings - subwoofer
UPC - 019048190970
View all Kenwood KDC-108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Function settings 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. • See table below for selection. • Repeat step 3 until the desired item is selected/activated. • Press ~ to return to the previous item. 4 Hold ~ to finish the procedure. [AUDIO CTRL] : While listening to any source except in STANDBY state... SUB-W LEVEL -15 - + 15 (Preset: 0): Adjusts the subwoofer output level. BASS BOOST B.BOOST LV1 *1 B.BOOST LV2: Selects your preferred bass boost level.; OFF: Cancels. SYSTEM Q NATURAL*1 USERI ROCK! POPSI EASYITOP401 JAZz/ GAME: Selects apreset sound mode suitable to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.) BASS LEVEl -8 - +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making an MID LEVEl adjustment, select the source you want to adjust.) TRE LEVEl BALANCE L15 - R15 (Preset: 0): Adjusts the left and right speaker output balance. FADER R15 - F15 (Preset: 0): Adjusts the rear and front speaker output balance. SUB-WSET ON *: Turns on the subwoofer output. ; OFF: Cancels. DETAIL SET LPF SUB-W: THROUGH*: All signals are sent to the subwoofer. ; 85Hz/120HZI 160HZ: Frequencies higher than 85 Hz/ 120 HzI 160 Hz are cut off. SUB-W PHASE: REV (180°)/ NORM (00)*: Selects the phase angle of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if asetting other than [THROUGH] is selected for [LPF SUB-W].) SUPREME SET: ON*: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/ WMA disc.) VOL OFFSET: -8 - +8 (for AUX) ; -8 - 0 (for other sources): Presets the volume adjustment level of (Preset: 0) each source. The volume level will automatically increase or decrease when you change the source. (Before making an adjustment, select the source you want to adjust.) • [SUB-W LEVEU SUB-W SETI LPF SUB-WI SUB-W PHASE] is selectable only if [SWITCH'PRE] is set to [SUB-W]. (page 6) • [SUB-W LEVEU LPF SUB-WI SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON]. [SETIINGS] AUXNAME CLOCK DISPLAY 10 AUX*I DVDI PORTABLEI GAMEl VIDEOI TV: Selects the desired name for the connected component. (Selectable only if"AUX" is selected as the source.) ClOCK ADJ: (For details, see page 6.) DIMMER SET: ON: Dims the display illumination. ;OFF*: Cancels. TEXT SCROLL: AUTO*I ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF: Cancels.