Kenwood KDC-108 Instruction Manual - Page 4
Basic operations - faceplate
UPC - 019048190970
View all Kenwood KDC-108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Basic operations Loading slot Remote sensor • Do not expose to bright sunlight. Display window Ejects the disc Volume knob Detaches the faceplate Auxiliary input jack The following indicator lights up when ... ST: A stereo broadcast is received (FM). IN: A disc is in the unit. Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth. Handling discs • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Clean from the center of the disc and move outward. • Clean the disc with a dry silicon or soft cloth. Do not use any solvents. • When removing discs from this unit, pull them out horizontally. • Remove the rims from the center hole and disc edge before inserting a disc. 4