Kenwood KDC-148 Instruction Manual - Page 7
Listening to the radio - reception
UPC - 019048190963
View all Kenwood KDC-148 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Listening to the radio ENGLISH Hold for about 2 seconds to memorize the current station. Press briefly to recall memorized station. 1 Press SRC to select "TUNER." 2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM). 3 Press 4 / ¢ to search for a station. Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. 4 Hold to finish the procedure. Item Selectable setting (Preset: *) SEEK MODE Selects the tuning mode for 4 / ¢ buttons. AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for a station. AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO*: Cancels (automatic memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 6) MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes). Using the remote controller (RC-405) FM+ / AM- : Selects band. 4 / ¢ (+) : Selects station. 1 - 6 : Selects preset station. 7