Kenwood KDC-5090R User Manual

Kenwood KDC-5090R Manual

Get Kenwood KDC-5090R PDF manuals and user guides View all Kenwood KDC-5090R manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KDC-5090R manual content summary:

  • Kenwood KDC-5090R | User Manual - Page 1
    KDC-V6090R KDC-6090R KDC-5090R CD-RECEIVER INSTRUCTION MANUAL B64-1873-00 (EN) COMPACT DIGITAL AUDIO
  • Kenwood KDC-5090R | User Manual - Page 2
    Disc Names (DNPS 26 Menu settings Menu System 28 Code Security Function 28 Touch Sensor Tone 29 Manual Time Adjustment 30 Automatic Time Adjustment 30 Selectable Illumination 30 Procedure 36 Connecting Cables to Terminals 37 Installation 38 Troubleshooting Guide 41 Specifications 44 -2-
  • Kenwood KDC-5090R | User Manual - Page 3
    cannot be displayed are generated, such as the DNPS, DNPP, Magazine random play, and CD Text display. Note that none of the KDC-C100, KDC-C302, C205, C705, and non-Kenwood CD changers can be connected. 2CAUTION You can damage both your unit and the CD changer if you connect them incorrectly. Do
  • Kenwood KDC-5090R | User Manual - Page 4
    Safety precautions NOTE • If you experience problems during installation, consult your Kenwood dealer. • Press the reset button recommend the use of the Code Security function (see p.28) to prevent theft. • The illustrations of the display and the panel appearing in this manual are examples used to
  • Kenwood KDC-5090R | User Manual - Page 5
    . In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. -5-
  • Kenwood KDC-5090R | User Manual - Page 6
    -R or CD-RW are also more likely to cause skipping when the disc is played. For these reasons, handle the disc very carefully. Detailed handling instructions will appear on the CD-R or CD-RW package: read this information carefully before using the disc. • Do not stick tape on either side of
  • Kenwood KDC-5090R | User Manual - Page 7
    . •CD-Rs and CD-RWs which have not undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CD-RW recorder.) Additionally, depending on the recording status, it may prove impossible to play
  • Kenwood KDC-5090R | User Manual - Page 8
    English General features 5 / ∞ ATT/LOUD KDC-6090R/KDC-5090R Clock indicator Q SRC / PWR OFF CLK DISP FM AM/ is switched on. "CODE ON" : Security Code has been registered "CODE OFF" : Security Code has not been registered LOUD indicator ATT indicator KDC-V6090R System Q indicator Speaker
  • Kenwood KDC-5090R | User Manual - Page 9
    control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDCCX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you page 35). The Power OFF Timer function is enabled only after the security code (page 28) is set up. NOTE Selecting AUX-name display Holding
  • Kenwood KDC-5090R | User Manual - Page 10
    English General features Theft Deterrent Faceplate The faceplate can be reversed to hide the control panel or detached form the unit, helping to deter theft. Removing the Faceplate: 1 • When the control panel is visible: Press the release button. • When the control panel has been hidden: Press the
  • Kenwood KDC-5090R | User Manual - Page 11
    NOTE Whilst the control panel is sliding, only available buttons are 0, ATT, v, w and SRC. Clock display Changing the Clock Display: Each time you press the CLK button, the display switches between the clock and each mode display. NOTE The clock indicator lights whilst the clock is displayed. TEL
  • Kenwood KDC-5090R | User Manual - Page 12
    ("SP O.E.M.") 4 Press the Q button to end the speaker setting mode. NOTE Speaker setting function allows for tuning of bass, middle and treble Function of the KDC-6090R Non-Fading Output You can turn the non-fading output on and off whilst the preout is switched to the non-fading preout. Turning
  • Kenwood KDC-5090R | User Manual - Page 13
    control features AUD KDC-6090R/KDC-5090R Selecting mode FM AM 4¢ Setting value KDC-V6090R Selecting mode in which to store the bass, middle, treble and N-F level settings. (N-F level : KDC-6090R only) The settings made for a particular source are then recalled automatically whenever you use
  • Kenwood KDC-5090R | User Manual - Page 14
    and setting: "NF Level" : - 15 - + 15 NOTE This mode is available only when the non-fading output function is set to on. Function of the KDC-6090R High-pass Filter Frequency for Front Output Adjust the frequency of the High-pass filter for front output. Display and setting: "HPF F" : Through / 40Hz
  • Kenwood KDC-5090R | User Manual - Page 15
    the required level. Display and setting: "V Offset"/"VOL Offset" : - 8 - ± 0 Tuner features DISP SRC #1-6 KDC-6090R/KDC-5090R Band display Frequency AM FM 4¢ Preset station number KDC-V6090R Band display AUTO indicator ST indicator Frequency Preset station number - 15 - AUTO indicator
  • Kenwood KDC-5090R | User Manual - Page 16
    the 4/¢ button to use preset station seek will receive channel 1. • Manual Tuning Press the ¢ button to increase the frequency by one step. Press Radio text (only during RDS station reception) Displaying Frequencies during programme service name display: Hold down the DISP button for one second or
  • Kenwood KDC-5090R | User Manual - Page 17
    To prevent accidents, drivers should not look at the display whilst driving. RDS features DISP PTY #1-6 KDC-6090R/KDC-5090R TI/ AM FM VOL ADJ 4¢ PTY indicator TI indicator NEWS indicator RDS indicator KDC-V6090R - 17 - PTY indicator TI indicator NEWS indicator RDS indicator
  • Kenwood KDC-5090R | User Manual - Page 18
    stations with better reception. • If you are tuned to a station that is not a traffic information station itself but which provides services, you can still have traffic information received. • Holding down the TI button for one second or more when the TI function is on in
  • Kenwood KDC-5090R | User Manual - Page 19
    Please see the menu settings (page 34) about switching between manual scrolling and automatic scrolling. Radio Text Scroll This function permits the method differs depending on the setting of scrolling in the menu. To scroll manually: 1 Press the DISP button to display the Radio Text. 2 Holding
  • Kenwood KDC-5090R | User Manual - Page 20
    RDS features English Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. 1 Press the PTY button. "PTY" is displayed, and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically
  • Kenwood KDC-5090R | User Manual - Page 21
    German Swedish Portuguese Norwegian 4 Press the DISP button to end the changing language mode. CD/External disc control features FM 38 SRC 0 SCAN REP RDM KDC-6090R/KDC-5090R DISP/ AM NAME.S M.RDM 4¢ Release button Track number Track time Disc number IN indicator
  • Kenwood KDC-5090R | User Manual - Page 22
    CD/External disc control features English Playing CDs Playing CDs: Press the release button to slide open the faceplate, showing the CD insertion slot. Holding the CD with the labeled side facing up, insert it in the slot. The CD will start playing. Push back the bottom of the faceplate with your
  • Kenwood KDC-5090R | User Manual - Page 23
    Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. NOTE You cannot use reverse play between tracks
  • Kenwood KDC-5090R | User Manual - Page 24
    English CD/External disc control features Track / Disc Repeat Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : w Track Repeat ON w Disc Repeat ON (Function of disc changers) w Repeat OFF "
  • Kenwood KDC-5090R | User Manual - Page 25
    CD and "NO TITLE/NO NAME" is displayed for MD. • If you attempt to display disc title/track title when connecting the CD changer not supported for CD text feature, caution messages such as "NO TEXT" or "Reading" may be displayed. • Depending on the type of characters of the CD Text
  • Kenwood KDC-5090R | User Manual - Page 26
    method differs depending on the setting of scrolling in the menu. To scroll manually: 1 Press the DISP button to display the disc title or the NOTE • Please see the menu settings (page 34) about switching between manual scrolling and automatic scrolling. • Only units with a CD text feature permit
  • Kenwood KDC-5090R | User Manual - Page 27
    changes. • Pressing the reset button erases the disc names stored in this unit, but does not erase the names stored in a disc changer. Menu settings #1-6 KDC-6090R/KDC-5090R Menu display SRC MENU FM AM DISP 4 ¢ NEWS indicator RDS indicator AUTO indicator
  • Kenwood KDC-5090R | User Manual - Page 28
    may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function. Code Security Function After a security code has been registered, power cannot be restored if the battery is disconnected from the unit unless the
  • Kenwood KDC-5090R | User Manual - Page 29
    must be entered the first time that the unit's power is turned on. "ENTER" and "CODE" will appear in the display, asking you to input the code. NOTE If you input an incorrect security code, the code setting mode will be cancelled automatically. Follow the steps from 3 to 7 above again. If you press
  • Kenwood KDC-5090R | User Manual - Page 30
    display "Clock Adjust" during the selecting function in the menu system. 2 Hold down either the 4 or ¢ button for one second or more to enter the Manual time adjustment mode. The time display will blink. 3 • Adjusting the hours Press the FM button to advance the hours, or press the AM button to
  • Kenwood KDC-5090R | User Manual - Page 31
    Function of the KDC-V6090R Variable Illumination Colour Setting You can set the display to a desired colour. Display and setting: 1 Select the display "Color" during the selecting function in the menu mode. 2 To set a colour manually: Hold down on the 4 or ¢ button. Pressing the ¢ button advances
  • Kenwood KDC-5090R | User Manual - Page 32
    English Menu settings Function of the KDC-6090R Switching preout Switch the preout between the rear if the desired station sends PTYcode for news bulletin or belongs to -Network sending PTY-code for news bulletin. • If you turn on the news bulletin function in the MW/LW band,
  • Kenwood KDC-5090R | User Manual - Page 33
    preset station seek tuning is selected. Display and setting: "Auto 1" : Auto seek tuning mode (Default setting) "Auto 2" : Preset station seek tuning mode "Manual" : Manual tuning mode When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner
  • Kenwood KDC-5090R | User Manual - Page 34
    in the same network broadcast different programmes or use different programme service names. Monaural Reception When the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. Display and setting: "Scroll Auto"
  • Kenwood KDC-5090R | User Manual - Page 35
    OFF after 40 minutes. "OFF 60min" : Unit's power goes OFF after 60 minutes. NOTE The Power OFF Timer function is enabled only after the security code (page 28) is set up. - 35 -
  • Kenwood KDC-5090R | User Manual - Page 36
    connections for each unit. 3. Connect the cable on the wiring harness. • If your car is not prepared for this special connection-system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all cable connections are
  • Kenwood KDC-5090R | User Manual - Page 37
    ISO-JASO) (Accessory3) Connector Function Guide Pin Numbers for ISO Connectors Cable KDC-6090R only) Front right output (Red) Front left output (White) To KENWOOD disc changer/ DAB control input/ KPA-SD100/KPA-HD100/KPASS100 NOTE To connect these leads, refer to the relevant instruction manuals
  • Kenwood KDC-5090R | User Manual - Page 38
    pins are set as described in 2 or 3, make the connection as illustrated. Installation s Installation Screw (M4X8) (commercially available) Firewall or metal support 1 (Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A-4 pin (yellow) is
  • Kenwood KDC-5090R | User Manual - Page 39
    s Removing the hard rubber frame 1 Refer to the section "Theft deterrent faceplate (P. 10)" and then remove the faceplate. 2 Engage the catch pins on the removal tool and remove the two locks on the upper level. Push upward the frame and pull it forward as shown in the figure. Lock Catch Accessory2
  • Kenwood KDC-5090R | User Manual - Page 40
    English Installation s Locking the faceplate to the unit If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below. 1 Refer to the function "Theft deterrent faceplate" (page 10) and remove the faceplate. 2 Insert the provided screw into the hole at the
  • Kenwood KDC-5090R | User Manual - Page 41
    Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION The power does not turn on. If you have selected
  • Kenwood KDC-5090R | User Manual - Page 42
    English Troubleshooting Guide PROBLEM POSSIBLE CAUSE The sound skips on a CD. The CD is scratched or dirty. The specified track does not play. Can't remove disc. Random play has
  • Kenwood KDC-5090R | User Manual - Page 43
    certain problems are occurring button on the unit. If the "E- 77", code does not disappear, consult your nearest service centre. Mecha Error Something is wrong with the disc KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is entered when
  • Kenwood KDC-5090R | User Manual - Page 44
    English Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz space 87.5 MHz - 108.0 MHz Usable sensitivity (S/N = 26dB 0.7 µV/75 ½ Quieting Sensitivity (S/N = 46dB 1.6 µV/75 ½ Frequency response (±3 dB 30 Hz - 15 kHz Signal to Noise ratio (
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
KDC-V6090R
KDC-6090R
KDC-5090R
B64-1873-00 (EN)
COMPACT
DIGITAL AUDIO
CD-RECEIVER
INSTRUCTION MANUAL