Kenwood KDC-7090R User Manual

Kenwood KDC-7090R Manual

Get Kenwood KDC-7090R PDF manuals and user guides View all Kenwood KDC-7090R manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KDC-7090R manual content summary:

  • Kenwood KDC-7090R | User Manual - Page 1
    KDC-V7090R CD-RECEIVER INSTRUCTION MANUAL KDC-7090R B64-1902-00 (EN) COMPACT DIGITAL AUDIO
  • Kenwood KDC-7090R | User Manual - Page 2
    DNPP 28 Text / Title Scroll 28 Menu settings Menu System 29 Mask Key 30 Touch Sensor Tone 30 Manual Time Adjustment 30 Automatic Time Adjustment 31 Selectable Illumination 31 Switching Graphic the Unit 42 Locking the faceplate to the unit 43 Troubleshooting Guide 44 Specifications 48
  • Kenwood KDC-7090R | User Manual - Page 3
    cannot be displayed are generated, such as the DNPS, DNPP, Magazine random play, and CD Text display. Note that none of the KDC-C100, KDC-C302, C205, C705, and non-Kenwood CD changers can be connected. 2CAUTION You can damage both your unit and the CD changer if you connect them incorrectly. Do
  • Kenwood KDC-7090R | User Manual - Page 4
    NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the RESET button. The unit returns to factory settings when the RESET button is pressed. After you press the reset button, the Mask Key will be needed to restart
  • Kenwood KDC-7090R | User Manual - Page 5
    . In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. -5-
  • Kenwood KDC-7090R | User Manual - Page 6
    -R or CD-RW are also more likely to cause skipping when the disc is played. For these reasons, handle the disc very carefully. Detailed handling instructions will appear on the CD-R or CD-RW package: read this information carefully before using the disc. • Do not stick tape on either side of
  • Kenwood KDC-7090R | User Manual - Page 7
    . •CD-Rs and CD-RWs which have not undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CDR/CD-RW writing software or CD-R/CD-RW recorder.) Additionally, depending on the recording status, it may prove impossible to play
  • Kenwood KDC-7090R | User Manual - Page 8
    ANG DAB ATT / LOUD KDC-V7090R ATT indicator 4 ¢ ANG Clock indicator SYSTEM Q indicator KDC-7090R Clock indicator LOUD indicator ATT faceplate" (page 12). NOTE • After installation of your Mask unit, be sure to transmit the Mask Key's signal to deactivate the demonstration mode. If this procedure
  • Kenwood KDC-7090R | User Manual - Page 9
    optional switching adapter KCAS210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDCCX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only). During the AUX mode, "AUX" (or
  • Kenwood KDC-7090R | User Manual - Page 10
    General features English Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on. Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. System Q You can
  • Kenwood KDC-7090R | User Manual - Page 11
    panel. NOTE Do not apply excessive force to the faceplate under setting 2. Forced Closing This function prevents tampering with the unit your car is being serviced etc. Hiding the unit with the ignition turned on (forced closing): Hold down the SRC button for one second or more. The faceplate will
  • Kenwood KDC-7090R | User Manual - Page 12
    English General features Removing the Faceplate The faceplate can be detached from the unit, helping to deter theft. Removing the faceplate: 1 Choose the way from among the following and open the faceplate. Turn the ignition off, hold down the SRC button for one second or more when the control
  • Kenwood KDC-7090R | User Manual - Page 13
    Audio control features KDC-V7090R Selecting mode KDC-7090R Selecting mode AUD PTY ANG DAB FM 4 AM ¢ Setting value Setting value Audio Control Setting Adjust various parameters of sound quality. 1 Hold down the AUD
  • Kenwood KDC-7090R | User Manual - Page 14
    English Audio control features Bass Centre Frequency Adjust the centre frequency of the bass. Display and setting: "Bass FRQ"/"Bass F" : 60 / 70 / 80 / 100 (Only when the bass quality factor is set to 1.00, 1.25 or 1.50) / 150 (Only when the bass quality factor is set to 2.00) Hz. Bass Level Adjust
  • Kenwood KDC-7090R | User Manual - Page 15
    and setting: "VOL Offset"/"V Offset" : - 8 - ± 0 Tuner features FM SRC PTY ANG DAB KDC-V7090R Band display #1 - 6 DISP / 4 AM ¢ NAME.S Frequency Preset station number ST indicator KDC-7090R Band display AUTO indicator Frequency Preset station number - 15 - ST indicator AUTO indicator
  • Kenwood KDC-7090R | User Manual - Page 16
    travelling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1. • Manual Tuning Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step. NOTE • The ST
  • Kenwood KDC-7090R | User Manual - Page 17
    press the DISP button, the display changes as follows: Programme Service name (only during RDS station reception)/ Station frequency Radio text prevent accidents, drivers should not look at the display whilst driving. RDS features KDC-V7090R KDC-7090R FM PTY PTY ANG DAB #1 - 6 TI/VOL ADJ DISP 4 AM
  • Kenwood KDC-7090R | User Manual - Page 18
    stations with better reception. • If you are tuned to a station that is not a traffic information station itself but which provides services, you can still have traffic information received. • Holding down the TI button for one second or more when the TI function is on in
  • Kenwood KDC-7090R | User Manual - Page 19
    Please see the menu settings (page 35) about switching between manual scrolling and automatic scrolling. Radio Text Scroll This function permits the method differs depending on the setting of scrolling in the menu. To scroll manually: 1 Press the DISP button to display the Radio Text. 2 Holding down
  • Kenwood KDC-7090R | User Manual - Page 20
    , and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically turn off. NOTE You cannot use . "PTY Found" is display for about 30 seconds. If you make no key input in 30 seconds, the PTY selection mode will turn off automatically. NOTE If
  • Kenwood KDC-7090R | User Manual - Page 21
    button to end the changing language mode. CD/External disc control features DISC+ 38 SRC 0 PTY ANG DAB SCAN RDM REP M.RDM DISP / 4 DISC- ¢ NAME.S KDC-V7090R Track number Track time KDC-7090R Track number IN indicator Disc number Track time IN indicator - 21 - Disc number
  • Kenwood KDC-7090R | User Manual - Page 22
    English CD/External disc control features Playing CDs Playing CDs: Press the 0(EJECT) button to slide open the faceplate, showing the CD (insertion) slot. Holding the CD with the labeled side facing up, insert it in the slot. The faceplate will close, and the CD will start playing. The IN indicator
  • Kenwood KDC-7090R | User Manual - Page 23
    of the CD Text, some characters may not be displayable. • If you attempt to display disc title/track title when connecting the CD changer not supported for CD text feature, caution messages such as "NO TEXT" or "Reading" may be displayed. Track Search Search forwards or backwards through the tracks
  • Kenwood KDC-7090R | User Manual - Page 24
    CD/External disc control features English Disc Search (Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: Press the DISC- button to display the desired disc number. Each
  • Kenwood KDC-7090R | User Manual - Page 25
    number blinks in the display when track repeat is on. "Disc Repeat ON" / "D-Repeat ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE Repeat play is cancelled when you eject the disc. Track Scan Successively play the beginning of each track on a disc until you
  • Kenwood KDC-7090R | User Manual - Page 26
    the disc changers that were manufactured and sold after 1997 (except for KDC-C560) are connected, you can directly input letters using the number/ differ depending on the disc changer that is connected. Please see your disc changer manual for details. Up to 30 CDs can be registered with this unit. •
  • Kenwood KDC-7090R | User Manual - Page 27
    Random Play Play all the tracks on the current disc in random order. 1 Press the RDM button to switch the random play function on and off. "Random ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected. When the track
  • Kenwood KDC-7090R | User Manual - Page 28
    to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: 1 Press the DISP button to display the disc title or the track title. 2 Holding down the DISP button for one second or more results in
  • Kenwood KDC-7090R | User Manual - Page 29
    Menu display FM 38 SRC MENU PTY ANG DAB 4 AM ¢ RDS indicator NEWS indicator AUTO indicator KDC-7090R Menu display RDS indicator Menu System You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to
  • Kenwood KDC-7090R | User Manual - Page 30
    button NOTE • Keep the Mask Key close to the signal sensor when you transmit the Mask Key's signal. • If the Mask Key's signal does not be received correctly, the display will return to "TRANSMIT 1" . In this case, repeat the Manual Time Adjustment Adjust the time manually. NOTE This adjustment is
  • Kenwood KDC-7090R | User Manual - Page 31
    to advance the minutes, or press the 4 button to make the minutes go back. 4 Press the MENU button to end the Manual Time Adjustment mode. Exiting the Manual Time Adjustment mode would start the clock counting. Automatic Time Adjustment With automatic time adjustment, you can set the clock time
  • Kenwood KDC-7090R | User Manual - Page 32
    English Menu settings Function of the KDC-V7090R Variable Illumination Colour Setting You can set the display to a desired colour. Display and setting: 1 Select the display "Color" during the selecting function in the menu mode. 2 To set a colour manually: Hold down on the 4 or ¢ button. Pressing
  • Kenwood KDC-7090R | User Manual - Page 33
    Time setting for removing the faceplate You can set the interval during which the open control panel cannot reverse to be hidden. During the period you have set, the faceplate can be removed from the faceplate bracket. Display and setting: "Off Wait" : 0s / 3s (Default setting) / 5s / 10s / 15s /
  • Kenwood KDC-7090R | User Manual - Page 34
    : Auto seek tuning mode (Default setting) "Auto 2" : Preset station seek tuning mode "Manual" : Manual tuning mode Cancelling Auto Memory Entry During Its Operation: Press the 4/¢ button whilst auto memory network broadcast different programmes or use different programme service names. - 34 -
  • Kenwood KDC-7090R | User Manual - Page 35
    control mode> This function permits the CD text, MD title, and Radio tex to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. Display and setting: "Scroll Auto" : Automatic scrolling "Scroll
  • Kenwood KDC-7090R | User Manual - Page 36
    English Basic Operations of remote control Accessory of the KDC-V7090R #0-9/A-Z 4/¢ FM/DISC + AM/DISC - ABC DEF  ! SRC GHI " PRS the Batteries: Use one lithium battery (CR2025). Remove the case following the instructions as illustrated. 1 Keep on slide 2 Pull out Insert the batteries with
  • Kenwood KDC-7090R | User Manual - Page 37
    optional switching adapter KCAS210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDCCX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only). During the AUX mode, "AUX" (or
  • Kenwood KDC-7090R | User Manual - Page 38
    English Basic Operations of remote control Accessory of the KDC-V7090R CD/External disc control features • 4/¢ buttons Press the 4 button to search through the tracks backwards. Press the ¢ button to search through the tracks forwards.
  • Kenwood KDC-7090R | User Manual - Page 39
    If your car is not prepared for this special connection-system, consult your KENWOOD dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna to a power source that can be turned on and off with the ignition key. • If the fuse blows, first make sure that the cables have not caused
  • Kenwood KDC-7090R | User Manual - Page 40
    Conversion Adaptor (ISO-JASO) (Accessory3) Connector Function Guide Pin Numbers for ISO Connectors Cable Colour External Power ) To KENWOOD disc changer/ DAB control input/ KPA-SD100/KPA-HD100/KPA-SS100 NOTE To connect these leads, refer to the relevant instruction manuals. External amplifier
  • Kenwood KDC-7090R | User Manual - Page 41
    ) (commercially available) Firewall or metal support Self-tapping screw (commercially available) Metal source that can be turned on and off with the ignition key. 2CAUTION Battery cable (Yellow) A-4 Pin (Yellow) To attach troubles such as the impossibility of opening or closing the panel may result
  • Kenwood KDC-7090R | User Manual - Page 42
    English Removing the Unit s Removing the hard rubber frame Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory4 Removal tool s Removing the Unit 1 Refer to the section "Removing the hard rubber frame" and then remove the
  • Kenwood KDC-7090R | User Manual - Page 43
    Locking the faceplate to the unit s Locking the faceplate to the unit If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below. 1 Refer to the function "Removing the faceplate (page 12)" and remove the faceplate. 2 Insert the provided screw into the
  • Kenwood KDC-7090R | User Manual - Page 44
    English Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION The power does not turn on. The fuse has
  • Kenwood KDC-7090R | User Manual - Page 45
    Troubleshooting Guide PROBLEM POSSIBLE CAUSE No sound can be heard, or the volume is low. The Attenuator function is turned on. The fader and/or balance settings are
  • Kenwood KDC-7090R | User Manual - Page 46
    Troubleshooting Guide CD/MD/External disc control mode PROBLEM to play. If the following situations, consult your nearest service centre: • Even though the disc changer is connected, S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is entered
  • Kenwood KDC-7090R | User Manual - Page 47
    Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. button on the unit. If the "E- 77", code does not disappear, consult your nearest service centre. Mecha Error Something is wrong with the disc magazine. Or the unit is malfunctioning for
  • Kenwood KDC-7090R | User Manual - Page 48
    English Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz space 87.5 MHz - 108.0 MHz Usable sensitivity (S/N = 26dB 0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB 1.6 µV/75 Ω Frequency response (±3 dB 30 Hz - 15 kHz Signal to Noise ratio (
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
KDC-V7090R
KDC-7090R
B64-1902-00 (EN)
COMPACT
DIGITAL AUDIO
CD-RECEIVER
INSTRUCTION MANUAL