Kenwood KDC-BT948HD kdcx995 (pdf) - Page 26

Operation of hands-free phoning SRC MENU VOL DISP SEARCH MODE 4 38 ¢ Getting Started Before use the cell-phone, you need to connect cellphone to this unit. ⁄ • For details on the Bluetooth cell-phone with the handsfree function, see (page 61). 1 Enter easy pairing mode Press the [ ] button for at least 1 second. 2 "Searching" is displayed. Search for the Bluetooth device. When search is completed, "Finished" is displayed. 3 Select a cell-phone name Turn the [VOL] knob and press it when the desired item is displayed. 4 Input the PIN code 1. Turn the [VOL] knob and press it when the desired item is displayed. Select the digit. 2. Turn the [VOL] knob to select the numbers, and then press the [VOL] knob. 5 Transmit the PIN code If "Pairing Success" is displayed, registration is completed. When "Confirm Phone" is displayed, confirm connection with a cell-phone operation. 6 The receiver is connected to a cell-phone, with "HF Connect" displayed, and exits the easy pairing mode. ⁄ • For more details, see (page 48). 26 | KDC-X995/ KDC-BT948HD Receiving a Call Answering a Phone Call Press the [VOL] knob. ⁄ • The following operations disconnect the line: - Insert a CD. - Connect a USB device. • The name of the calling party is displayed if it has already been registered in the Phone Book. Rejecting an Incoming Call Press the [ ] or [SRC] button. During a Call Disconnecting a Call Press the [ ] or [SRC] button. Switching to the Private Mode Press the [38] knob. Switches between Private talk ("PRIVATE") and Hands-free talk each time this button is pressed. ⁄ • Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection. If this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate your cell-phone to return to the hands-free talk mode. Adjusting the Voice Volume during a Call Turn the [VOL] knob. Call Waiting Answering Another Incoming Call with the Current Call Suspended 1 Press the [VOL] knob. 2 Turn the [VOL] knob and press it when the desired item is displayed. Select "ANSWER". Answering another Incoming Call after Terminating the Current Call Press the [ ] or [SRC] button. Continuing the Current Call 1 Press the [VOL] knob. 2 Turn the [VOL] knob and press it when the desired item is displayed. Select "REJECT".