Kenwood KDC-D300 Instruction Manual
Kenwood KDC-D300 - In-Dash CD Player Only Manual
 |
UPC - 019048105448
View all Kenwood KDC-D300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KDC-D300 manual content summary:
- Kenwood KDC-D300 | Instruction Manual - Page 1
KDC-D300 CD-PLAYER INSTRUCTION MANUAL COMPACT DIGITAL AUDIO © B64-1430-00 (E) (MC) 00/2 1 99/12 11 10 9 8 7 6 5 4 3 2 1 - Kenwood KDC-D300 | Instruction Manual - Page 2
and Display 6 Playing CDs 6 Switching Spectrum Analyzer Display 7 Presetting Disc Names 7 Eject 8 Display Level Adjustment 8 Theft Deterrent Faceplate 8 Installation Accessories 9 Installation Procedure 10 Connections 11 Installation 11 Troubleshooting guide 13 Specifications 15 -2- - Kenwood KDC-D300 | Instruction Manual - Page 3
from the CD and damage the unit. IMPORTANT INFORMATION This unit is NOT designed to be connected directly to control units that are manufactured and sold before 1994. If used with such units, an optional CA-SD200 (sold separately) must be used. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT - Kenwood KDC-D300 | Instruction Manual - Page 4
get scratched if you put them in a dusty CD slot. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait - Kenwood KDC-D300 | Instruction Manual - Page 5
for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. Storing CDs • Do not store CDs in areas exposed to direct sunlight (such as a car seat or the dashboard) or other hot places. • Remove CDs from the unit when not listening to them for - Kenwood KDC-D300 | Instruction Manual - Page 6
CD PLAYER KDC-D300 INTEGRATED QUAD 1 BIT D/A CONVERTER MENU DISP DIGITAL OPTIMUM SERVO CONTROL 60 120 250 380 500 750 1k 2k 4k DPAC 11BAND11BAND 8k 16k SPECTRUM ANALYZER DISP button Setting of the O-N switch will be required depending on the Centre unit that is to be connected - Kenwood KDC-D300 | Instruction Manual - Page 7
analyzer display switches as following table; Operation for "O" Setting: 1 Selecting CD play source mode. 2 Each time you press the DISP button, the will be displayed when the disc name has been preset to any of the connected units. Operation for "O" Setting: This unit permits up to 12 characters to - Kenwood KDC-D300 | Instruction Manual - Page 8
you, helping to deter theft. Removing Faceplate: Press the release button and drop open the faceplate. In its dropped condition, whilst drawing the faceplate to one side, pull it to the front and remove it. Release button £ CD PLAYER KDC-D300 INTEGRATED QUAD 1 BIT D/A CONVERTER DISP DIGITAL - Kenwood KDC-D300 | Instruction Manual - Page 9
will be set and the unit will be operational. NOTE When there is difficulty in setting the faceplate, align the depression on the left side of the faceplate with the shaft of the unit, then lock. Shaft Depression Accessories External view ......... Number of items External view ......... Number - Kenwood KDC-D300 | Instruction Manual - Page 10
car are working properly. • Mount the unit so that the mounting angle is 30° or less. Control input White/Black FRONT • L + White Gray/Black FRONT • R + Gray N O Gray/Black Gray N O KDC-D300 R Speaker input cable(Accessory4) L 2CAUTION If the speaker input cable is not connected - Kenwood KDC-D300 | Instruction Manual - Page 11
Installation s Installation Firewall or metal support Accessory2 Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. On cars where there is no compartment in - Kenwood KDC-D300 | Instruction Manual - Page 12
English Installation s Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Lock Catch Accessory1 Removal tool 2 When the lower level is removed, remove the upper two - Kenwood KDC-D300 | Instruction Manual - Page 13
cable has been connected to the disc changer input terminal on the unit. No CD has been inserted. Attenuator is turned on. The fader or balance settings are set all the way to one side. 5 minutes have elapsed since the panel dropped open. The speaker input cable is not connected. The fader setting - Kenwood KDC-D300 | Instruction Manual - Page 14
Troubleshooting Guide The following messages are displayed on the centre unit when certain problems are occurring in your system. Take the recommended actions. E-01 EJECT NO PANEL E-30 E-04 E-99 No CD in the unit. ] Insert the CD. The faceplate of this unit has been removed. ] Replace it. The CD - Kenwood KDC-D300 | Instruction Manual - Page 15
Specifications Specifications subject to change without notice. CD player section Laser diode GaAlAs (λ=780 nm) Digital filter (D/A 8 Times Over Sampling D/A Converter 1 Bit Spindle speed 500 - 200 rpm (CLV) Wow & Flutter Below Measurable Limit Frequency
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
KDC-D300
©
B64-1430-00 (E) (MC)
00/2 1 99/12 11 10 9 8 7 6 5 4 3 2 1
COMPACT
DIGITAL AUDIO
CD-PLAYER
INSTRUCTION MANUAL