Kenwood KDC-MP208 Instruction Manual - Page 11
Deactivating Security Code, Manual, Clock Adjustment - error codes
UPC - 019048174413
View all Kenwood KDC-MP208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. ~ ~ • If you enter the wrong Code in steps 4 through 6. repeat from step 4. 9 Exit Security Code mode Press the [B. BOOST] button. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "APPROVED" is displayed. Now, you can use the unit. ~ · When the Security Code function is activated, "CODE SET" changes to "CODE CLR': · To deactivate the Security Code function, see the next section . Function of KDC-MP238 Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code mode Press the top or bottom side of the Control knob. Select the "CODE ClR" display. 2 Enter Security Code mode Press the center of the Control knob for at least 1 second. When "ENTER" is displayed. "CODE ClR" is also displayed. 3 Select the digits to enter Press the right or left side of the Control knob. 4 Select the Security Code numbers Press the top or bottom side of the Control knob. 5 Repeat steps 3 and 4, and complete the Security Code. 6 Press the center of the Control knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 7 Exit Security Code mode Press the [B.BOOST] button. ~ ~ If a wrong security code is entered. "ERROR" is displayed. Enter a correct security code. Manual Clock Adjustment 1 Select Clock Adjustment mode Press the top or bottom side of the Control knob. Select the "ClK ADJ"I "ClCK" display. 2 Enter Clock Adjust mode Press the center of the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Press the top or bottom side of the Control knob. Adjust the minutes Press the right or left side of the Control knob. 4 Exit Clock adjustment mode Press the [B.BOOST] button. English I 11