Kenwood KDC X493 Instruction Manual - Page 14
Tuner Operation
UPC - 019048182111
View all Kenwood KDC X493 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Tuner Operation Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Enter Auto Memory Entry mode Select "AUTO MEMORY". For how to select Function Control items, refer to (page 6). 2 Open Auto Memory Entry Turn the [AUD] knob to select "YES", and then press the [AUD] knob. When 6 stations that can be received are put in the memory, auto memory entry closes. Preset Tuning Recalling the stations in the memory. 1 Enter Preset Tuning Select mode Press the [SEARCH] button. 2 Select a desired station in the memory Turn the [AUD] knob or push it towards up or down. 3 Recall the station Press the [AUD] knob. Cancelling Preset Tuning Press the [SEARCH] button. Station Preset Memory Putting a station in the memory. 1 Select the frequency to put in the memory Push the [AUD] knob towards right or left. 2 Enter Preset Memory mode Press the [SEARCH] button. 3 Select the number to put in the memory Turn the [AUD] knob or push it towards up or down. 4 Determine the number to put in the memory Press the [AUD] knob for at least 1 second. Cancelling the Preset Memory mode Press the [SEARCH] button. Function of remote control Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [0], [9], [2], [1] [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. ⁄ • You can enter the FM band frequency in steps of a minimum of 0.1 MHz. 14 | KDC-BT742U/ KDC-X493/ KDC-MP442U