Kenwood KDC X493 Instruction Manual - Page 18
Other Functions - reset
UPC - 019048182111
View all Kenwood KDC X493 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Other Functions Activating Security Code ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Select Security Code item during Menu mode (In Standby mode) "SECURITY SET" is displayed. For how to select Function Control items, refer to (page 6). 2 Enter Security Code mode Press the [AUD] knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 3 Enter Security Code Operation type Select the digits to enter Select the Security Code numbers Operation Push the [AUD] knob towards right or left. Turn the [AUD] knob or push it towards up or down. 4 Confirm the Security Code Press the [AUD] knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 5 Do the step 3 through 4 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. ⁄ • If you enter the wrong Code in steps 3 through 4, repeat from step 3. 6 Exit Security Code mode Press the [SEARCH] button. Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed. 1 Turn the power ON. 2 Do the step 3 through 4 operation, and enter the Security Code. "APPROVED" is displayed. Now, you can use the unit. Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code item during Menu mode (In Standby mode) Select the "SECURITY CLR" display. For how to select Function Control items, refer to (page 6). 2 Enter Security Code mode Press the [AUD] knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 3 Enter Security Code Operation type Select the digits to enter Select the Security Code numbers Operation Push the [AUD] knob towards right or left. Turn the [AUD] knob or push it towards up or down. 4 Press the [AUD] knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 5 Exit Security Code mode Press the [SEARCH] button. ⁄ • If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. 18 | KDC-BT742U/ KDC-X493/ KDC-MP442U