Kenwood KDC X493 Instruction Manual - Page 28
Bluetooth Setup - code
UPC - 019048182111
View all Kenwood KDC X493 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Function of KDC-BT742U Bluetooth Setup Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. When registering from Bluetooth devices 1 Turn on the control unit. 2 Start registering a unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select "KENWOOD BT CD/R-3P2" from the list of connected units. 3 Enter a PIN code Input the PIN code registered as mentioned in (page 28). Check that registration is complete on the Bluetooth device. 4 By operating the Bluetooth device, start hands- free connection. When registering from this unit 1 Enter Bluetooth device registration mode Select "MENU" > "DVC REGIST". Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to (page 6). Search for the Bluetooth device. When search is completed, "FINISHED" is displayed. 2 Select the Bluetooth device Turn the [AUD] knob or push it towards up or down to select the Bluetooth device. Press the [AUD] knob to determine the selection. 3 Input the PIN code Operation type Select the numbers. Move to the next digit. Delete the last digit. Operation Turn the [AUD] knob or push it towards up or down. Push the [AUD] knob towards right. Push the [AUD] knob towards left. 4 Transmit the PIN code Press the [AUD] knob for at least 1 second. If "PAIRING OK" is displayed, registration is completed. 5 Return to the device list Press the [AUD] knob. 6 Exit Bluetooth device registration mode Press the [SEARCH] button. 28 | KDC-BT742U/ KDC-X493/ KDC-MP442U ⁄ • This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device. • If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. • If the error message appears even though the PIN code is correct, try (page 28). Registering Special Bluetooth device Allow registration of a special device that cannot be registered normally (pairing). 1 Enter special device registration mode Select "MENU" > "S-DVC SELECT". Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to (page 6). A list is displayed. 2 Select a device name Turn the [AUD] knob or push it towards up or down to select a device name. Press the [AUD] knob to determine the selection. If "COMPLETE" is displayed, registration is completed. 3 Go through the procedure of (page 28) and complete the registration (pairing). Cancelling special device registration mode Press the [SEARCH] button. ⁄ • If the device name is not in the list, select "OTHER PHONE". Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Enter PIN code edit mode Select "MENU" > "PIN EDIT". Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to (page 6). The current setting of PIN code is displayed.