Kenwood KDC X493 Instruction Manual - Page 32
Bluetooth Setup, Satellite Radio tuner control, Optional
UPC - 019048182111
View all Kenwood KDC X493 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Function of KDC-BT742U Bluetooth Setup Satellite Radio tuner control (Optional) ⁄ • The unopened message is displayed at the beginning of the list. Other messages are displayed in the order of reception. • The SMS that has arrived when the cell-phone is not linked with Bluetooth cannot be displayed. Download the SMS. • The short message cannot be displayed during downloading the SMS. Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter SMS download mode Select "MENU" > "SMS DOWNLOAD". Press the [AUD] knob for at least 1 second. For how to select Function Control item, refer to (page 6). A message list appears. 2 Start downloading Press the [AUD] knob. "DOWNLOADING" is displayed. When the downloading finishes, "COMPLETE" is displayed. 3 Exit the SMS download mode Press the [SEARCH] button. ⁄ • The cell-phone must be able to transmit the SMS using Bluetooth. Setting on the cell-phone may be required. If the cell-phone does not support SMS function, the SMS download item in Function Control mode is not displayed. • When the SMS is downloaded from the cell-phone, the unopened messages in the cell-phone are opened. • The already-read and unread short messages can be respectively downloaded up to 75. 32 | KDC-BT742U/ KDC-X493/ KDC-MP442U Basic Operation Selecting Satellite Radio source Press the [SRC] button. Select the "SAT"/ "SIRIUS"/ "XM" display. ⁄ • You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if "CALL ... TO SUBSCRIBE" appears. • The radio may take a little time to start receiving after you select the Satellite Radio source. • If the signal reception fails, "ACQUIRING SIGNAL"/ "NO SIGNAL" appears. Switching Seek Mode For KDC-X493/MP442U: Press the [AUTO] button. For KDC-BT742U: Press the [AUTO] button for at least 1 second. Display "CHANNEL" "PRESET" Operation Normal manual seeking control. Search in order of the channels in the Preset memory. Select the channel Push the [AUD] knob towards right or left. Selecting the Preset Band Push the Control knob toward up. Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4. Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode Press the [SEARCH] button. 2 Select the Category and Channel Search Turn the [AUD] knob to select "CH SEARCH", and then press the [AUD] knob. 3 Select the Category Turn the [AUD] knob or push it towards up or down. 4 Select the Channel Push the [AUD] knob towards right or left. Cancelling Category and Channel Search mode Press the [SEARCH] button.