Kenwood KDC-X494 kdcx494 (pdf)

Kenwood KDC-X494 Manual

Get Kenwood KDC-X494 PDF manuals and user guides
UPC - 019048187826
View all Kenwood KDC-X494 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KDC-X494 manual content summary:

  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 1
    CD-RECEIVER KDC-X494 KDC-MP445U KMR-440U INSTRUCTION MANUAL The latest version of the Instruction Manual can be downloaded from www.kenwood.com/cs/ce/. Before reading this manual, please access this site to check whether your manual is the latest one. Take the time to read through this instruction
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 2
    SMS (Short Message Service) 37 Displaying the SMS Downloading the SMS Function setting 16 Basic Operations of remote control 38 Display Settings 22 Appendix 39 Selecting Display Type Troubleshooting Guide 41 Selecting Text Display HD Radio™ tuner control 24 Specifications 43 Tuning
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 3
    discs which do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/ CD-RW recorder instruction manual.) • 3 inch CD cannot be used. Attempt to insert using an adapter can cause
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 4
    • The source "iPod" and "CD" can be selected when each source is ready to play. • When an optional accessory is connected, the source name for each device appears. • The power will be turned off automatically after about 20 minutes have lapsed in standby mode. (KMR-440U only) Volume Turn the Control
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 5
    scroll Keep the [S.MODE] button pressed down to scroll through the CD or audio file text display. Auxiliary input Portable audio device can be connected with the stereo mini-plug (3.5 mm ø). ⁄ • CA-U1EX (optional accessory) is recommended to connect a USB device. CA-U1EX Playing Music (CD/USB/iPod
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 6
    audio system comes back ON. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (Quick Start Guide). ¤ • Remove the faceplate at once after pressing the Release button -MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 7
    , refer to (page 4). 2 Enter Audio Control mode Press the [AUDIO] button. 3 Select the Audio item to adjust Turn the Control knob to select the audio item for adjustment and then press the [ENTER] button. Press the [ ] button to return to the previous item. 4 Adjust the
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 8
    Recall Turn the Control knob to select "Recall", and then press the [ENTER] button. 5 Turn the Control knob to select "YES", and then press the [ENTER] button. "Recall Completed" is displayed. 6 Exit Audio Control mode Press the [ ] button for at least 1 second. 8 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 9
    Music disc/Audio file Operation Function of Audio file/ Internal CD source Music Search Selecting the music you want to listen to from the device or media being played now. 1 Enter Music Search mode Press the [ ] button. "MUSICSEARCH" is displayed. 2 Search for music Audio file Operation type
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 10
    the [ ] button. Cancelling the Music Search mode Press the [ ] button for at least 1 second. ⁄ • Set the ratio with 25 Skip Search in (page 16). • Keep pushing Control knob for 3 seconds or longer skips songs at 10% regardless of the setting. 10 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 11
    Browsing for music of the same artist or genre as the one being played. 1 Enter Related Search mode Press the [S.MODE] button. 2 Select browsing item Turn the Control knob and press the [ENTER] button when the desired browse item is selected. Display Browses music "Search Artist" Displays
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 12
    to select the song you want to delete and then press the [ENTER] button for at least 2 seconds. 12 | KDC-X494/ KDC-MP445U/ KMR-440U 3 Turn the Control knob to select "One" or "All", and then press the [ENTER] button. Selecting "All" deletes all songs. 4 Turn the Control knob to select "YES", and
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 13
    Direct Music Search Press the [ ] button on the remote control. ⁄ • Direct Music Search cannot be performed during playing of iPod. Function of disc changers Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the "CD CH" display. For how to select
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 14
    remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [9], [2], [1] [8], [1], [0] 3 Search the frequency Press the [4] or [¢] button on the remote control. Cancelling Direct Music Search Press the [ ] button on the remote control. 14 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 15
    setting item Audio control Audio control item button. Cancelling the Favorite Preset Memory mode Press the [ ] button. ⁄ • Register 6 pairs of Favorite Preset Memory. "Register your favorite functions" is displayed for numbers available for preset. • The memory cannot be erased by the Reset button
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 16
    mode Press the [FNC] button. CD changer)/ "Folder Repeat" (Audio file) ➤ "ON", "OFF" When set to "ON", plays the music in the disc/ folder repeatedly. 07 Magazine Random: "MGZN Random" ➤ "ON", "OFF" When set to "ON", plays the music in the disc changer randomly. 16 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 17
    color is changed in conjunction with the sound volume. Tuner Settings 22 Seek Mode: "Seek Mode" ➤ "Auto1", "Auto2", "Manual" Selects the tuning mode of the radio. Tuning mode Auto seek Preset station seek Manual Display Operation "Auto1" Automatic search for a station. "Auto2" Search in order of
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 18
    "YES" and then pressing [ENTER] button starts upgrading the firmware. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ Demo Mode Settings 36 Demo Mode: "DEMO Mode" ➤ "ON", "OFF" Specifies whether to enable demonstration. 18 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 19
    Radio Settings 37 Seek Mode: "Seek Mode" ➤ "Auto1", "Auto2", "Manual" Selects the tuning mode of the radio. Tuning mode Auto seek Preset station seek Manual button to start the auto memory operation. 39 Receive mode: "Receive mode" ➤ "Auto", "Digital", "Analog" Sets the receive mode of the HD Radio
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 20
    audio sound mode. 2. Turn the Control knob to select "BT Setting", and then press the [ENTER] button. 3. Turn the Control knob to select desired item, and then press the [ENTER] button. 4. Turn the Control knob to select value, and then press the [ENTER] button. 20 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 21
    playback of a CD, audio file, or iPod Function item list No. "Play Mode" "Hands Mode" (iPod) 01 "Track Scan" (CD)/ "File Scan" (Audio file) 02 "Disc Random" (CD)/ "Folder Random" (Audio 03 file/ iPod) "All Random" (iPod) 04 "Track Repeat" (CD)/ "File Repeat" (Audio file/ 05 iPod) "Disc
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 22
    mode Press the [ ] button In HD Radio (Optional CD & External disc source Information Disc title Track title Play time Spectrum analyzer & Clock Date Displays the status (Type A display only) Blank Display "Disc Title" "Track Title" "P-Time" "Speana/Clock" "Date" "Indicator" "Blank" In Audio file
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 23
    on currently selected browsing items. • If the iPod Control by Hand Mode is set to on while playing the iPod, "iPod By Hand Mode" is displayed. • If all characters cannot be displayed while playing with iPod, the file number in the list is displayed. Information Display Music title "TITLE
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 24
    ) : Auto seek or Manual : Auto mode • During mode Press the [ ] button. 2 Select a desired station in the memory Turn the Control knob. 3 Recall the station Press the [ENTER] button. Cancelling Preset Tuning Press the [ ] button. 24 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 25
    Apple iTunes Music Store. 1 Enter HD Radio iTunes tagging mode Press the [ENTER] button. " TAG " will be indicated on the mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 2 Select Tuning item Press the [DIRECT] button on the remote control. Pressing the [DIRECT] button
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 26
    ] button. Cancelling Preset Tuning Press the [ ] button. Channel Scan Every receivable Channel is checked for 10 seconds. 1 Start Channel Scan Press the [S.MODE] button. 2 Release it when the channel you want to listen to is received Press the [S.MODE] button. 26 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 27
    Press the [ ] button on the remote control. ⁄ • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal" appears
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 28
    a Phone Call Press the [ENTER] button. ⁄ • The following operations disconnect the line: - Insering a CD. - Connecting a USB device. • The KMR-440U Pushing the Control knob towards right or left sorts the Phone Book by name. 6 Make a call Press the [ENTER] button. ⁄ • Pressing [S.MODE] button
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 29
    number with reference to the following: Dialing a number/ Calling a number in the call log/ Calling a number in the Phone Book 2 Enter Preset Memory mode Press the [ ] button. 3 Select a number and store it in the memory Turn the Control knob to select memory number ("P1" - "P6"), and then press the
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 30
    [S.MODE] button. 5 Make a call Press the [ENTER] button. ⁄ • If your voice cannot be recognized, a message is displayed. Refer to (page 41). Pressing the [ENTER] button allows Office"/" " Office "Mobile"/" " Mobile "Other"/" " Other 30 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 31
    selection> (page 4). Pause and play Press the [ ] button. Music Search Push the Control knob towards right or left. ⁄ • All or some of the operations above cannot be performed if the Bluetooth audio player is not ready for remote control. • Switching between Bluetooth audio sources does not start or
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 32
    , registration is completed. 5 Go through the procedure of (page 32) and complete the registration (pairing). Cancelling Bluetooth mode Press the [FNC] button. ⁄ • If the device name is not in the list, select "Other Phones". 32 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 33
    mode Press the [FNC] button for at least 1 second. "BT MODE" is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select PIN code edit mode not support automatic download of phone book data. In this case, try downloading manually. Downloading from the cell-phone manually 1 Operate
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 34
    with the audio player. Deleting a Registered Bluetooth device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode Press the [FNC] button for at least 1 second. "BT MODE" is displayed. 2 Enter Function setting mode Press the [FNC] button. 34 | KDC-X494/ KDC-MP445U/ KMR-440U 3 Select
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 35
    . ⁄ • If your voice cannot be recognized, a message is displayed. (Refer to (page 41)) Pressing the [ENTER] button allows you to retry voice input. Selecting "Check" (Play) 6 Press the [ENTER] button. Play the registered voice and return to step 2. Selecting "Delete" (Delete
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 36
    6 to 7 in (page 35). 8 Exit Bluetooth mode Press the [SRC] button. ⁄ • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command. 36 | KDC-X494/ KDC-MP445U/ KMR-440U
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 37
    the downloading finishes, "Completed" is displayed. 5 Exit Bluetooth mode Press the [SRC] button. ⁄ • The cell-phone must be able to transmit the SMS using Bluetooth. Setting on the cell-phone may be required. If the cell-phone does not support SMS function, the SMS download item in Function Control
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 38
    • Determination: [ENT] • Enter Audio Control mode: [AUD] In Tuner/HD Radio source • Band selection: [FM]/[AM] • Station selection: [4]/[¢] • Recall preset stations: [1] - [6] In CD/Audio file source • Music selection: [4]/[¢] • Folder selection: [FM]/[AM] • Pause/Play: [ENT] • Enter Music search
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 39
    or conditions of media or device. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from ① to ⑩. CD (1) ¡! ^ :FFooldlderer ¡ :AAuuddioiofilele 2 3 ¡" ¡# 4 ¡$ 5 ¡% ¡P An online manual about audio files is put on the site, www
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 40
    unit supports the PC application "KENWOOD Music Editor Lite ver1.0" or later. • When you use the audio file with database information added by the "KENWOOD Music Editor Lite ver1.0", you can search a file by title, album or artist name using the (page 9). • In the Instruction manual
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 41
    .  Wire or insulate the speaker cable properly and press the reset button. If the "Protect" code does not disappear, consult your nearest service center. Unsupported File: An Audio file is played with a format that this unit can't support. Copy Protection: A copy-protected file is played. Read
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 42
    Troubleshooting Guide No Music Data/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. USB ERROR: Some trouble reset button KMR-440U mode. No Voice: No call. Memory Full: The tag memory of HD Radio
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 43
    Media Audio Audio section Maximum output power : 50 W x 4 Full Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker Impedance : 4 - 8 Ω Tone action Bass : 100 Hz ±8 dB Middle : 1 kHz ±8 dB Treble : 12.5 kHz ±8 dB Preout level / Load (CD) KDC-X494 : 4000 mV/10 kΩ KDC-MP445U/ KMR-440U : 2500
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 44
  • Kenwood KDC-X494 | kdcx494 (pdf) - Page 45
    . These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
CD-RECEIVER
KDC-X494
KDC-MP445U
KMR-440U
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X494/ KDC-MP445U/ KMR-440U
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.kenwoodusa.com
The latest version of the Instruction Manual can be downloaded from
www.kenwood.com/cs/ce/. Before reading this manual, please access this site
to check whether your manual is the latest one.
© 10Stepup_IM304_Ref_En_01_K