Kenwood KDC-X496 User Manual - Page 11
Tuner operation
View all Kenwood KDC-X496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Function of KDC-X496, KDC-452U, KMR-550U Tuner operation For the basic operations to listen to the radio, refer to the Quick Start Guide. Auto memory You can register 18 (FM)/ 6 (AM) stations with good reception automatically. 1 Select the Tuner source Press the [SRC] button. Select the "TUNER" display. 2 Enter the Function setting mode Press and hold the Control knob. 3 Select the Auto memory function item Select the following items using the Control knob. "Settings" > "Auto Memory" 4 Start storing stations in the Auto memory mode Turn the Control knob to select "YES", and then press the Control knob. When 18 (FM)/ 6 (AM) stations that can be received are stored in the memory, the process in this mode is completed. Tuner setting You can set up the tuner. 1 Select the Tuner source Press the [SRC] button. Select the "TUNER" display. 2 Enter the Function setting mode Press and hold the Control knob. 3 Select the Settings item Turn the Control knob to select "Settings", and then press the Control knob. 4 Select a desired Tuner setting item Turn the Control knob to select Tuner setting item, and then press the Control knob. Display "Settings" "Seek Mode" "MONO" "TI" Description Sets the tuning mode. Auto1: Automatic search for a station. Auto2: Search in order of the stations in the preset memory. Manual: Normal manual tuning. You can reduce the noise when stereo broadcasts are received as monaural. "ON" / "OFF" Switches to the traffic information automatically when the traffic bulletin starts. "ON" / "OFF" ( : Factory setting) 5 Select a setting and determine it Turn the Control knob to select a desired tuner setting, and then press the Control knob. The previous item is displayed. 6 Exit the Function setting mode Press and hold the [ ] button. Function of KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U with remote control Direct access tuning You can search for a station directly by entering frequency. 1 Enter the Direct access tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press the following buttons [9], [2], [1] [8], [1], [0] 3 Search for the frequency Press the [4] or [¢] button on the remote control. Canceling Direct access tuning mode Press the [ ] button on the remote control. Contents 20 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 21